Anna Mária Keszler

Measurement and analysis of atomic and diatomic carbon spectra from laser ablation of graphite

Spectra from plasma produced by laser-induced breakdown of graphite were recorded and analyzed to increase our understanding of the way in which carbon nanoparticles are created during Nd:YAG laser ablation of graphite. The effects of various buffer gases were studied. Electron density and temperature were determined from spectra of the first and second ions of atomic carbon. The C2 Swan spectrum was also prominent in most of the measured spectra. Temperature was inferred from each experimental Swan spectrum by determination of the temperature for which a synthetic Swan spectrum best fitted, in the least-squares sense, the measured spectrum.

Laser-induced carbon plasma emission spectroscopic measurements on solid targets and in gas-phase optical breakdown

We report measurements of time- and spatially averaged spontaneous-emission spectra following laser-induced breakdown on a solid graphite/ambient gas interface and on solid graphite in vacuum, and also emission spectra from gas-phase optical breakdown in allene C3H4 and helium, and in CO2 and helium mixtures. These emission spectra were dominated by CII (singly ionized carbon), CIII (doubly ionized carbon), hydrogen Balmer beta (Hbeta), and Swan C2 band features. Using the local thermodynamic equilibrium and thin plasma assumptions, we derived electron number density and electron temperature estimates. The former was in the 10(16) cm(-3) range, while the latter was found to be near 20000 K. In addition, the vibration-rotation temperature of the Swan bands of the C2 radical was determined to be between 4500 and 7000 K, using an exact theoretical model for simulating diatomic emission spectra. This temperature range is probably caused by the spatial inhomogeneity of the laser-induced plasma plume. Differences are pointed out in the role of ambient CO2 in a solid graphite target and in gas-phase breakdown plasma.

Spontaneous emission from the C3 radical in carbon plasma

Spontaneous emission measurements are discussed for the Swings transitions of the C(3) radical in laser-generated graphite plasma, and the spectroscopy of the C(3) radical in carbon vapor and plasma is summarized. A review is given of some theoretical calculations and emission spectroscopic investigations are presented. Time-averaged, laser-induced optical breakdown spectra are reported from Nd:YAG laser generated graphite microplasma. In 200-300 Torr of argon and helium, and depending on the specific experimental configuration, a weak emission continuum is observed centered at 400 nm when using a laser fluence of typically 1 J/cm(2). Such continua were not detected in our previous experiments using focused laser radiation. The possibilities for the origin of this continuum are considered.

Spark plasma sintering of Si3N4/multilayer graphene composites

Abstract Mulitlayer graphene reinforced silicon nitride composites were prepared by spark plasma sintering to investigate the effect of the graphene addition on mechanical properties. The composites contained multilayer graphene (MLG) in various (0, 1, 3 and 5 wt%) content. Significantly higher fracture toughness of 8.0 MPa m1/2 was obtained at 1% MLG content, however, on further increasing the graphene content the toughness did not increase, but dropped to the value of the monolithic silicon nitride. The maximum hardness of 18.8 MPa was also obtained at 1% MLG, while at higher MLG contents it gradually decreased. Graphical Abstract

Decomposition of Chlorobenzene by Thermal Plasma Processing

Decomposition of chlorobenzene as a model molecule of aromatic chlorinated compounds was studied in radiofrequency thermal plasma both in neutral and oxidative conditions. Optical emission spectroscopy was applied for the evaluation of the plasma excitation and molecular rotational-vibrational temperature. Atomic (C, H, O) and molecular (CH, OH, C2) radicals were identified, while the morphology of the formed soot was characterized by electron microscopy. Organic compounds adsorbed on the surface of the soot after plasma processing were comprised of various polycyclic aromatic hydrocarbons (PAH) and chlorinated PAH molecules. Their amount was greatly affected by experimental conditions, especially the oxygen content and plate power. The higher input power reduced the ring number of the PAH molecules. Addition of oxygen significantly reduced the amount of both PAHs chlorinated PAH molecules but enhanced the formation of polychlorinated benzene compounds.

Optical emission spectra analysis of thermal plasma treatment of poly(vinyl chloride)

Abstract Decomposition of poly(vinyl chloride) (PVC) was investigated in radiofrequency thermal plasma in neutral, oxidative and reductive conditions. Optical emission spectroscopy (OES) was applied for the characterization of the plasma column. OES was used to identify active plasma components such as excited atoms, ions, radicals and molecules. The spectra were dominated by molecular C2, CN, OH, and CH bands, and atomic H, Ar, C, Cl and O lines. Emission intensities of main species were monitored versus various experimental parameters. The rotational-vibrational temperatures determined from different bimolecular species were considered in the range of 2000–6400 K. Solid soot samples were collected and purified to investigate the possibility of graphene formation as a by-product of the decomposition process. Graphical Abstract

Titanium monoxide spectroscopy following laser-induced optical breakdown

This work investigates Titanium Monoxide (TiO) in ablation-plasma by employing laser-induced breakdown spectroscopy (LIBS) with 1 to 10 TW/cm2 irradiance, pulsed, 13 nanosecond, Q-switched Nd:YAG laser radiation at the fundamental wavelength of 1064 nm. The analysis of TiO is based on our first accurate determination of transition line strengths for selected TiO A-X, B-X, and E-X transitions, particularly TiO A-X γ and B-X γ′ bands. Electric dipole line strengths for the A3Φ-X3δ and B3Π-X3δ bands of TiO are computed. The molecular TiO spectra are observed subsequent to laser-induced breakdown (LIB). We discuss analysis of diatomic molecular spectra that may occur simultaneously with spectra originating from atomic species. Gated detection is applied to investigate the development in time of the emission spectra following LIB. Collected emission spectra allow one to infer micro-plasma parameters such as temperature and electron density. Insight into the state of the micro-plasma is gained by comparing meas...

The role of self-protonation under direct GC-MS determination of amphetamine hydrochloride

SummaryWe studied the possibility of direct GC-MS determination of amphetamine hydrochloride. In order to avoid the double peak we determined the optimal injector temperature (260°C) and heating rate (40°C min−1). In the direct analysis of amphetamine hydrochloride containing samples, calibration for fragmentm/z=59 (originating from amphetaminium ion fragmentation; the calibrating agent is amphetamine hydrochloride) gave better results than calibration form/z=44 (derived from both free amphetamine and amphetaminium ion; calibration agents were amphetamine or amphetamine hydrochloride). We also compared the mass spectra of amphetamine and amphetamine hydrochloride taken by ion-trap GC-MS. The fragmentation path was cleavage of the C-C bond at benzyl position for the free base or between the phenyl group and the aliphatic moiety, in the case of free base and amphetaminium ion, respectively.

Thermal Plasma Decomposition of Tetrachloroethylene

Tetrachloroethylene (C2Cl4) has been used widely as a solvent and dry cleaning agent, but was later specified as possible human carcinogen. As a result, its safe treatment became a priority. In this paper, we report on its decomposition in an atmospheric radiofrequency thermal plasma reactor. Main components of the exhaust gases were determined by Fourier transform infrared spectroscopy. We found that complete decomposition can be achieved in either oxidative or reductive conditions but not in neutral one. The solid soot product was characterised by transmission electron microscopy and specific surface area measurement. Organic compounds adsorbed on the surface of the soot were extracted by toluene and comprised, based on gas chromatography mass spectrometry, of various perchlorinated aliphatic (for example hexachlorocyclopentadiene) and aromatic compounds (like hexachlorobenzene, octachloronaphthalene or octachloroacenaphthylene). Several nitrogen containing molecules were also identified whose presence are rare during thermal plasma treatments. Further investigation of the extract by mass spectrometry revealed various higher molar mass chlorinated carbon clusters and two types of fullerenes (C60 and C70).