Anna Stoppato

Dynamic performance of a combined gas turbine and air bottoming cycle plant for off-shore applications

When the Norwegian government introduced the CO2 tax for hydrocarbon fuels, the challenge became to improve the performance of off-shore power systems. An oil and gas platform typically operates on an island (stand-alone system) and the power demand is covered by two or more gas turbines. In order to improve the plant performance, a bottoming cycle unit can be added to the gas turbine topping module, thus constituting a combined cycle plant. This paper aims at developing and testing the numerical model simulating the part-load and dynamic behavior of a novel power system, composed of two gas turbines and a combined gas turbine coupled with an air bottoming cycle plant. The case study is the Draugen off-shore oil and gas platform, located in the North Sea, Norway. The normal electricity demand is 19 MW, currently covered by two gas turbines generating each 50% of the power demand, while the third turbine is on stand-by. During oil export operations the power demand increases up to 25 MW. The model of the new power plant proposed in this work is developed in the Modelica language using basic components acquired from ThermoPower, a library for power plant modelling. The dynamic model of the gas turbine and the air bottoming cycle turbogenerator includes dynamic equations for the combustion chamber, the shell-and-tube recuperator and the turbine shafts. Turbines are modelled by the Stodola equation and by a correlation between the isentropic efficiency and the non-dimensional flow coefficient. Compressors are modelled using quasi steady-state conditions by scaling the maps of axial compressors employing a similar design point. The recuperator, which recovers the exhaust heat from the gas turbine, is modelled using correlations relating the heat transfer coefficient and the pressure drop at part-load with the mass flow rate. Thermodynamic variables and dynamic metrics, such as the rise time and the frequency undershooting/ overshooting, are predicted. Considering a load ramp of 0.5 MW/s, an undershooting of 4.9% and an overshooting of 3.0% are estimated. The rise time is approximately 30 s. Moreover, findings suggest that decreasing the core weight of the recuperator leads to limiting the frequency fluctuations, thus minimizing the risk of failure of the power system.Copyright

Optimal Design and Management of a Hybrid Photovoltaic-Pump Hydro Energy Storage System

The exploitation of renewable sources is an opportunity to increase the number of people who have access to electricity. To assure better living conditions, the free and simple access to water is another fundamental key point in many developing countries. Stand-alone photovoltaic pumping systems are often installed in remote areas where the grid is not available: they are used for irrigation and/or other local water needs and can supply also electricity to small consumers. In this paper a system aimed at supplying electricity and water to an isolated small village has been studied. Ground water is pumped into a storage reservoir and can be used both for irrigation and domestic use. The system is composed by a photovoltaic plant, a pump as turbine (PAT), a diesel internal combustion engine for integration purposes and a battery storage. By means of an optimization model based on the Particle Swarm Theory, the size of the system and its managing strategy have been optimized in order to fulfill the requirement of the users, to improve the system efficiency and minimize the overall costs. The most suitable hourly-based profile of the flow rates of a pump-as-turbine as well was found.© 2014 ASME

Experimental investigation of emissions and flame stability for steel and metal fiber cylindrical premixed burners

ABSTRACT In the market of gas-fired devices, the share of condensing premixed boilers has strongly increased over the last years, since these devices will be the leading technology in the near future. Despite this, premixed burner design is currently mostly driven by trial and error methodology. Scientific research on burner concepts is active on theoretical, numerical, and experimental points of view, but there is a lack in appliance-oriented research. In the present study, the authors experimentally investigate the performance of cylindrical premixed burners coupled to a very common commercial premixed boiler setup, with special attention to the metal fiber application: the aim is to generate knowledge on applied premixed combustion, in order to assist future appliance-oriented burner design processes. A test protocol has been defined. Emission and flame stability characteristics have been identified for steel and fiber burners. The metal fiber contribution to the combustion behavior has been highlighted.