Anne-Claire Fabre

Getting a grip on the evolution of grasping in musteloid carnivorans: a three-dimensional analysis of forelimb shape.

The ability to grasp and manipulate is often considered a hallmark of hominins and associated with the evolution of their bipedal locomotion and tool use. Yet, many other mammals use their forelimbs to grasp and manipulate objects. Previous investigations have suggested that grasping may be derived from digging behaviour, arboreal locomotion or hunting behaviour. Here, we test the arboreal origin of grasping and investigate whether an arboreal lifestyle could confer a greater grasping ability in musteloid carnivorans. Moreover, we investigate the morphological adaptations related to grasping and the differences between arboreal species with different grasping abilities. We predict that if grasping is derived from an arboreal lifestyle, then the anatomical specializations of the forelimb for arboreality must be similar to those involved in grasping. We further predict that arboreal species with a well‐developed manipulation ability will have articulations that facilitate radio‐ulnar rotation. We use ancestral character state reconstructions of lifestyle and grasping ability to understand the evolution of both traits. Finally, we use a surface sliding semi‐landmark approach capable of quantifying the articulations in their full complexity. Our results largely confirm our predictions, demonstrating that musteloids with greater grasping skills differ markedly from others in the shape of their forelimb bones. These analyses further suggest that the evolution of an arboreal lifestyle likely preceded the development of enhanced grasping ability.

Do constraints associated with the locomotor habitat drive the evolution of forelimb shape? A case study in musteloid carnivorans

Convergence in morphology can result from evolutionary adaptations in species living in environments with similar selective pressures. Here, we investigate whether the shape of the forelimb long bones has converged in environments imposing similar functional constraints, using musteloid carnivores as a model. The limbs of quadrupeds are subjected to many factors that may influence their shape. They need to support body mass without collapsing or breaking, yet at the same time resist the stresses and strains induced by locomotion. This likely imposes strong constraints on their morphology. Our geometric morphometric analyses show that locomotion, body mass and phylogeny all influence the shape of the forelimb. Furthermore, we find a remarkable convergence between: (i) aquatic and semi‐fossorial species, both displaying a robust forelimb, with a shape that improves stability and load transfer in response to the physical resistance imposed by the locomotor environment; and (ii) aquatic and arboreal/semi‐arboreal species, with both groups displaying a broad capitulum. This augments the degree of pronation/supination, an important feature for climbing as well as grasping and manipulation ability, behaviors common to aquatic and arboreal species. In summary, our results highlight how musteloids with different locomotor ecologies show differences in the anatomy of their forelimb bones. Yet, functional demands for limb movement through dense media also result in convergence in forelimb long‐bone shape between diverse groups, for example, otters and badgers.

Linear Versus Geometric Morphometric Approaches for the Analysis of Head Shape Dimorphism in Lizards

Differences between the sexes may arise because of differences in reproductive strategy, with females investing more in traits related to reproductive output and males investing more in traits related to resource holding capacity and territory defence. Sexual dimorphism is widespread in lizards and in many species males and females also differ in head shape. Males typically have bigger heads than females resulting in intersexual differences in bite force. Whereas most studies documenting differences in head dimensions between sexes use linear dimensions, the use of geometric morphometrics has been advocated as more appropriate to characterize such differences. This method may allow the characterization of local shape differences that may have functional consequences, and provides unbiased indicators of shape. Here, we explore whether the two approaches provide similar results in an analyses of head shape in Tupinambis merianae. The Argentine black and white tegu differs dramatically in body size, head size, and bite force between the sexes. However, whether the intersexual differences in bite force are simply the result of differences in head size or whether more subtle modifications (e.g., in muscle insertion areas) are involved remains currently unknown. Based on the crania and mandibles of 19 lizards with known bite force, we show intersexual differences in the shape of the cranium and mandible using both linear and geometric morphometric approaches. Although both types of analyses showed generally similar results for the mandible, this was not the case for the cranium. Geometric morphometric approaches provided better insights into the underlying functional relationships between the cranium and the jaw musculature, as illustrated by shape differences in muscle insertion areas not detected using linear morphometric data. J. Morphol. 275:1016–1026, 2014.

Morphological integration in the forelimb of musteloid carnivorans

The forelimb forms a functional unit that allows a variety of behaviours and needs to be mobile, yet at the same time stable. Both mobility and stability are controlled, amongst others, at the level of the elbow joint. This joint is composed of the humero‐ulnar articulation, mainly involved during parasagittal movements; and the radio‐ulnar articulation, mainly allowing rotation. In contrast, the humero‐radial articulation allows both movements of flexion–extension and rotation. Here, we study the morphological integration between each bone of the forelimb at the level of the entire arm, as well as at the elbow joint, in musteloid carnivorans. To do so, we quantitatively test shape co‐variation using surface 3D geometric morphometric data. Our results show that morphological integration is stronger for bones that form functional units. Different results are obtained depending on the level of investigation: for the entire arm, results show a greater degree of shape co‐variation between long bones of the lower arm than between the humerus and either bone of the lower arm. Thus, at this level the functional unit of the lower arm is comprised of the radius and ulna, permitting rotational movements of the lower arm. At the level of the elbow, results display a stronger shape co‐variation between bones allowing flexion and stability (humerus and ulna) than between bones allowing mobility (ulna and radius and humerus and radius). Thus, the critical functional unit appears to be the articulation between the humerus and ulna providing the stability of the joint.

Patterns of quadrupedal locomotion in a vertical clinging and leaping primate (Propithecus coquereli) with implications for understanding the functional demands of primate quadrupedal locomotion.

OBJECTIVES Many primates exhibit a suite of characteristics that distinguish their quadrupedal gaits from non-primate mammals including the use of a diagonal sequence gait, a relatively protracted humerus at touchdown, and relatively high peak vertical forces on the hindlimbs compared to the forelimbs. These characteristics are thought to have evolved together in early, small-bodied primates possibly in response to the mechanical demands of navigating and foraging in a complex arboreal environment. It remains unclear, however, whether primates that employ quadrupedalism only rarely demonstrate the common primate pattern of quadrupedalism or instead use the common non-primate pattern or an entirely different mechanical pattern from either group. MATERIALS AND METHODS This study compared the kinematics and kinetics of two habitually quadrupedal primates (Lemur catta and Varecia variegata) to those of a dedicated vertical clinger and leaper (Propithecus coquereli) during bouts of quadrupedal walking. RESULTS All three species employed diagonal sequence gaits almost exclusively, displayed similar degrees of humeral protraction, and exhibited lower vertical peak forces in the forelimbs compared to the hindlimb. DISCUSSION From the data in this study, it is possible to reject the idea that P. coquereli uses a non-primate pattern of quadrupedal walking mechanics. Nor do they use an entirely different mechanical pattern from either most primates or most non-primates during quadrupedal locomotion. These findings provide support for the idea that this suite of characteristics is adaptive for the challenges of arboreal locomotion in primates and that these features of primate locomotion may be basal to the order or evolved independently in multiple lineages including indriids. Am J Phys Anthropol 160:644-652, 2016.

Quantitative inferences on the locomotor behaviour of extinct species applied to Simocyon batalleri (Ailuridae, Late Miocene, Spain)

Inferences of function and ecology in extinct taxa have long been a subject of interest because it is fundamental to understand the evolutionary history of species. In this study, we use a quantitative approach to investigate the locomotor behaviour of Simocyon batalleri, a key taxon related to the ailurid family. To do so, we use 3D surface geometric morphometric approaches on the three long bones of the forelimb of an extant reference sample. Next, we test the locomotor strategy of S. batalleri using a leave-one-out cross-validated linear discriminant analysis. Our results show that S. batalleri is included in the morphospace of the living species of musteloids. However, each bone of the forelimb appears to show a different functional signal suggesting that inferring the lifestyle or locomotor behaviour of fossils can be difficult and dependent on the bone investigated. This highlights the importance of studying, where possible, a maximum of skeletal elements to be able to make robust inferences on the lifestyle of extinct species. Finally, our results suggest that S. batalleri may be more arboreal than previously suggested.

Does aquatic foraging impact head shape evolution in snakes

Evolutionary trajectories are often biased by developmental and historical factors. However, environmental factors can also impose constraints on the evolutionary trajectories of organisms leading to convergence of morphology in similar ecological contexts. The physical properties of water impose strong constraints on aquatic feeding animals by generating pressure waves that can alert prey and potentially push them away from the mouth. These hydrodynamic constraints have resulted in the independent evolution of suction feeding in most groups of secondarily aquatic tetrapods. Despite the fact that snakes cannot use suction, they have invaded the aquatic milieu many times independently. Here, we test whether the aquatic environment has constrained head shape evolution in snakes and whether shape converges on that predicted by biomechanical models. To do so, we used three-dimensional geometric morphometrics and comparative, phylogenetically informed analyses on a large sample of aquatic snake species. Our results show that aquatic snakes partially conform to our predictions and have a narrower anterior part of the head and dorsally positioned eyes and nostrils. This morphology is observed, irrespective of the phylogenetic relationships among species, suggesting that the aquatic environment does indeed drive the evolution of head shape in snakes, thus biasing the evolutionary trajectory of this group of animals.

Interrelationships Between Bones, Muscles, and Performance: Biting in the Lizard Tupinambis merianae

The origins of and potential constraints on the evolution of phenotypic diversity remain one of the central questions in evolutionary biology. The vertebrate skeleton is governed by historical, developmental, architectural, and functional constraints that all play a role in establishing its final form. Whereas the factors underlying shape variation in single bones are fairly well understood, this is less so the case for complex assemblages of bones as observed in the cranium or mandible. It is often suggested that the final phenotype must reflect the mechanical constraints imposed by the loading of the skeleton as bones remodel to withstand loading. Yet, in the cranium, in contrast to the mandible, the final phenotype is likely constrained by demands other than loading including the protection of sensory systems and the brain. Architectural design constraints may further limit the final form of complex units like the vertebrate cranium. Here we use geometric morphometric approaches to quantify the shape of the cranium and mandible in a lizard and test whether the observed shape co-varies with both the muscles attaching to these structures as well as functional traits such as bite force. Our results show that co-variation between the cranium and mandible is significant and likely driven by the muscles that link the two systems. Moreover, our results show that the patterns of co-variation are stronger between the mandible and ventral side of the cranium. Muscular cross sectional areas, bite force, and the ventral side of the cranium, also co-vary more than the dorsal side of the cranium does with muscle properties and function. Finally, our results show sex-specific patterns of co-variation with males showing a stronger degree of integration between the cranium, mandible, muscles and bite force suggesting that constraints on bite force drive the evolution of cranial shape to a greater extent in males compared to females.

Ontogeny of the cranial system in Laonastes aenigmamus

Rodents, together with bats, are among the ecologically most diverse and most speciose groups of mammals. Moreover, rodents show elaborate specializations of the feeding apparatus in response to the predominantly fore‐aft movements of the lower jaw. The Laotian rock rat Laonastes aenigmamus was recently discovered and originally thought to belong to a new family. The difficulties in classifying L. aenigmamus based on morphological characters stem from the fact that it presents a mixture of sciurognathous and hystricognathous characteristics, including the morphology of the jaw adductors. The origin of the unusual muscular organization in this species remains, however, unclear. Here, we investigate the development of the masticatory system in Laonastes to better understand the origin of its derived morphology relative to other rodents. Our analyses show that skull and mandible development is characterized by an overall elongation of the snout region. Muscle mass increases with positive allometry during development and growth, and so does the force‐generating capacity of the jaw adductor muscles (i.e. physiological cross‐sectional area). Whereas fetal crania and musculature are more similar to those of typical rodents, adults diverge in the elongation of the rostral part of the skull and the disproportionate development of the zygomaticomandibularis. Our data suggest a functional signal in the development of the unusual cranial morphology, possibly associated with the folivorous trophic ecology of the species.

Functional associations between support use and forelimb shape in strepsirrhines and their relevance to inferring locomotor behavior in early primates

The evolution of primates is intimately linked to their initial invasion of an arboreal environment. However, moving and foraging in this milieu creates significant mechanical challenges related to the presence of substrates differing in their size and orientation. It is widely assumed that primates are behaviorally and anatomically adapted to movement on specific substrates, but few explicit tests of this relationship in an evolutionary context have been conducted. Without direct tests of form-function relationships in living primates it is impossible to reliably infer behavior in fossil taxa. In this study, we test a hypothesis of co-variation between forelimb morphology and the type of substrates used by strepsirrhines. If associations between anatomy and substrate use exist, these can then be applied to better understand limb anatomy of extinct primates. The co-variation between each forelimb long bone and the type of substrate used was studied in a phylogenetic context. Our results show that despite the presence of significant phylogenetic signal for each long bone of the forelimb, clear support use associations are present. A strong co-variation was found between the type of substrate used and the shape of the radius, with and without taking phylogeny into account, whereas co-variation was significant for the ulna only when taking phylogeny into account. Species that use a thin branch milieu show radii that are gracile and straight and have a distal articular shape that allows for a wide range of movements. In contrast, extant species that commonly use large supports show a relatively robust and curved radius with an increased surface area available for forearm and hand muscles in pronated posture. These results, especially for the radius, support the idea that strepsirrhine primates exhibit specific skeletal adaptations associated with the supports that they habitually move on. With these robust associations in hand it will be possible to explore the same variables in extinct early primates and primate relatives and thus improve the reliability of inferences concerning substrate use in early primates.