Anthony E. G. Cass

Glucose sensors: a review of current and emerging technology

Glucose monitoring technology has been used in the management of diabetes for three decades. Traditional devices use enzymatic methods to measure glucose concentration and provide point sample information. More recently continuous glucose monitoring devices have become available providing more detailed data on glucose excursions. In future applications the continuous glucose sensor may become a critical component of the closed loop insulin delivery system and, as such, must be selective, rapid, predictable and acceptable for continuous patient use. Many potential sensing modalities are being pursued including optical and transdermal techniques. This review aims to summarize existing technology, the methods for assessing glucose sensing devices and provide an overview of emergent sensing modalities.

Protein Adsorption on Nanocrystalline TiO2 Films: An Immobilization Strategy for Bioanalytical Devices

We have investigated the use of optically transparent, nanoporous TiO(2) films as substrates for protein immobilization. Immobilization on such films may be readily achieved from aqueous solutions at 4 °C. The nanoporous structure of the film greatly enhances the active surface area available for protein binding (by a factor of 150 for a 4-μm-thick film). We demonstrate that the redox state of immobilized cytochrome c may be modulated by the application of an electrical bias potential to the TiO(2) film and that the fluorescence yield of immobilized fluorophore-labeled maltose-binding protein may be used to monitor specifically maltose concentration. We conclude that nanoporous TiO(2) films may be useful both for basic studies of protein/electrode interactions and for the development of array-based bioanalytical devices employing both optical and electrochemical signal transduction methodologies.

Proteomics, nanotechnology and molecular diagnostics.

Sequencing of the human genome opened the way to the exploration of the proteome and this has lead to the identification of large numbers of proteins in complex biological samples. The identification of diagnostic patterns in samples taken from patients to aid diagnosis is in the early stages of development. The solution to many of the technical challenges in proteomics and protein based molecular diagnostics will be found in new applications of nanomaterials. This review describes some of the physical and chemical principles underlying nanomaterials and devices and outlines how they can be used in proteomics; developments which are establishing nanoproteomics as a new field. Nanoproteomics will provide the platform for the discovery of next generation biomarkers. The field of molecular diagnostics will then come of age.

Carbon-13 CP/MAS solid-state NMR and FT-IR spectroscopy of wood cell wall biodegradation

Abstract The study of the degradation carried out by microorganisms on plant cell walls poses several problems in the analysis of the degraded solid materials. In this article this analytical problem has been studied by solid-state, high-resolution, carbon-13 cross-polarization/magic angle spinning nuclear magnetic resonance (CP/MAS NMR) and Fourier-transformed infrared (FT-IR) spectroscopy. These two nondestructive techniques proved to be able to give insights into the modifications at a molecular level that the cell wall components undergo during attack by Basidiomycetes fungi. Spruce ( Pinus sylvestris ) and beech wood samples ( Fagus sylvatica ) were exposed for 6 weeks to the activity of brown-rot ( Coniophora puteana ) and white-rot ( Coriolus versicolor ) fungi. Brown-rot fungi appeared preferentially to degrade the polysaccharides, leaving a modified lignin network, whereas white-rot fungi were able to degrade extensively both the polysaccharides and the lignin. A quantitative approach based on integration of CP/MAS NMR spectra showed that spruce lignin was degraded to 77% of its weight by brown-rot, and to 39% by white-rot fungi.

Protein adsorption on nanoporous TiO2 films: a novel approach to studying photoinduced protein/electrode transfer reactions

We have investigated the use of nanoporous TiO2 films as substrates for protein immobilisation. Such films are of interest due to their high surface area, optical transparency, electrochemical activity and ease of fabrication. These films moreover allow detailed spectroscopic study of protein/electrode electron transfer processes. We find that protein immobilisation on such films may be readily achieved from aqueous solutions at 4 degrees C with a high binding stability and no detectable protein denaturation. The nanoporous structure of the film greatly enhances the active surface area available for protein binding (by a factor of up to 850 for an 8 microns thick film). We demonstrate that the redox state of proteins such as immobilised cytochrome-c (Cyt-c) and haemoglobin (Hb) may be modulated by the application of an electrical bias potential to the TiO2 film, without the addition of electron transfer mediators. The binding of Cyt-c on the TiO2 films is investigated as a function of film thickness, protein concentration, protein surface charge and ionic strength. We demonstrate the potential use of immobilised Hb on such TiO2 films for the detection of dissolved CO in aqueous solutions. We further show that protein/electrode electron transfer may be initiated by UV bandgap excitation of the TiO2 electrode. Both photooxidation and photoreduction of the immobilised proteins can be achieved. By employing pulsed UV laser excitation, the interfacial electron transfer kinetics can be monitored by transient optical spectroscopy, providing a novel probe of protein/electrode electron transfer kinetics. We conclude that nanoporous TiO2 films may be useful both for basic studies of protein/electrode interactions and for the development of novel bioanalytical devices such as biosensors.

High throughput assay for cytochrome P450 BM3 for screening libraries of substrates and combinatorial mutants.

A rapid method for identifying compounds that are potential substrates for the drug metabolising enzyme cytochrome P450 is described. The strategy is based on the detection of a degradation product of NAD(P)H oxidation during substrate turnover by the enzyme expressed in Escherichia coli cells spontaneously lysed under the experimental conditions. The performance of the method has been tested on two known substrates of the wild-type cytochrome P450 BM3, arachidonic (AA) and lauric (LA) acids, and two substrates with environmental significance, the anionic surfactant sodium dodecyl sulfate (SDS), and the solvent 1,1,2,2-tetrachloroethane (TCE). The minimal background signal given from cells expressing cytochrome P450 BM3 in the absence of added substrate is only 3% of the signal in the presence of saturating substrate. Control experiments have proven that this method is specifically detecting NADPH oxidation by catalytic turnover of P450 BM3. The assay has been adapted to a microtitre plate format and used to screen a series of furazan derivatives as potential substrates. Three derivatives were identified as substrates. The method gave a significant different signal for two isomeric furazan derivatives. All results found on the cell lysate were verified and confirmed with the purified enzyme. This strategy opens the way to automated high throughput screening of NAD(P)H-linked enzymatic activity of molecules of pharmacological and biotechnological interest and libraries of random mutants of NAD(P)H-dependent biocatalysts.

Smart plastic antibody material (SPAM) tailored on disposable screen printed electrodes for protein recognition: Application to myoglobin detection

This work introduces two major changes to the conventional protocol for designing plastic antibodies: (i) the imprinted sites were created with charged monomers while the surrounding environment was tailored using neutral material; and (ii) the protein was removed from its imprinted site by means of a protease, aiming at preserving the polymeric network of the plastic antibody. To our knowledge, these approaches were never presented before and the resulting material was named here as smart plastic antibody material (SPAM). As proof of concept, SPAM was tailored on top of disposable gold-screen printed electrodes (Au-SPE), following a bottom-up approach, for targeting myoglobin (Myo) in a point-of-care context. The existence of imprinted sites was checked by comparing a SPAM modified surface to a negative control, consisting of similar material where the template was omitted from the procedure and called non-imprinted materials (NIMs). All stages of the creation of the SPAM and NIM on the Au layer were followed by both electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). AFM imaging was also performed to characterize the topography of the surface. There are two major reasons supporting the fact that plastic antibodies were effectively designed by the above approach: (i) they were visualized for the first time by AFM, being present only in the SPAM network; and (ii) only the SPAM material was able to rebind to the target protein and produce a linear electrical response against EIS and square wave voltammetry (SWV) assays, with NIMs showing a similar-to-random behavior. The SPAM/Au-SPE devices displayed linear responses to Myo in EIS and SWV assays down to 3.5 μg/mL and 0.58 μg/mL, respectively, with detection limits of 1.5 and 0.28 μg/mL. SPAM materials also showed negligible interference from troponin T (TnT), bovine serum albumin (BSA) and urea under SWV assays, showing promising results for point-of-care applications when applied to spiked biological fluids.

DNA optical sensor: a rapid method for the detection of DNA hybridization

A DNA optical sensor system is proposed based on the combination of sandwich solution hybridization, magnetic bead capture, flow injection and chemiluminescence for rapid detection of DNA hybridization. Bacterial alkaline phosphatase (phoA) gene and Hepatitis B virus (HBV) DNA were used as target DNA. A biotinylated DNA probe was used to capture the target gene onto the streptavidin-coated magnetic beads and a calf intestine alkaline phosphatase (CAP)-labelled DNA probe was used for subsequent enzymatic chemiluminescence detection. The detection cycle was less than 30 min, excluding the DNA hybridization time, which was about 100 min. Both the phoA gene and HBV DNA could be detected at picogramme or femtomole level. No response signal was obtained when target DNA did not exist in the sample. Successive sample detection could be made by removing the magnetic field and a washing step.

Immobilisation of enzymes on poly(aniline)-poly(anion) composite films. Preparation of bioanodes for biofuel cell applications

Immobilisation of enzymes is important for applications such as biosensors or biofuel cells. A poly(histidine) tag had been introduced on the C terminus of a lactate dehydrogenase enzyme. This mutant enzyme was then immobilised onto poly(aniline) (PANi)-poly(anion) composite films, PANi-poly(vinylsulfonate) (PVS) or PANi-poly(acrylate) (PAA). The NADH produced by the immobilised enzyme in the presence of beta-nicotinamide adenine dinucleotide (NAD(+)) and lactate is oxidised at the poly(aniline)-coated electrode at 0.05 to 0.1 V vs. saturated calomel electrode (SCE) at 35 degrees C.

Use of microneedle array devices for continuous glucose monitoring: a review.

Microneedle array devices provide the opportunity to overcome the barrier characteristics of the outermost skin layer, the stratum corneum. This novel technology can be used as a therapeutic tool for transdermal drug delivery, including insulin, or as a diagnostic tool providing access to dermal biofluids, with subsequent analysis of its contents. Over the last decade, the use of microneedle array technology has been the focus of extensive research in the field of transdermal drug delivery. More recently, the diagnostic applications of microneedle technology have been developed. This review summarizes the existing evidence for the use of microneedle array technology as biosensors for continuous monitoring of the glucose content of interstitial fluid, focusing also on mechanics of insertion, microchannel characteristics, and safety profile.