Anthony F. Cozzolino

Selective Turn-On Ammonia Sensing Enabled by High-Temperature Fluorescence in Metal–Organic Frameworks with Open Metal Sites

We show that fluorescent molecules incorporated as ligands in rigid, porous metal-organic frameworks (MOFs) maintain their fluorescence response to a much higher temperature than in molecular crystals. The remarkable high-temperature ligand-based fluorescence, demonstrated here with tetraphenylethylene- and dihydroxyterephthalate-based linkers, is essential for enabling selective and rapid detection of analytes in the gas phase. Both Zn2(TCPE) (TCPE = tetrakis(4-carboxyphenyl)ethylene) and Mg(H2DHBDC) (H2DHBDC(2-) = 2,5-dihydroxybenzene-1,4-dicarboxylate) function as selective sensors for ammonia at 100 °C, although neither shows NH3 selectivity at room temperature. Variable-temperature diffuse-reflectance infrared spectroscopy, fluorescence spectroscopy, and X-ray crystallography are coupled with density-functional calculations to interrogate the temperature-dependent guest-framework interactions and the preferential analyte binding in each material. These results describe a heretofore unrecognized, yet potentially general property of many rigid, fluorescent MOFs and portend new applications for these materials in selective sensors, with selectivity profiles that can be tuned as a function of temperature.

Phenyl Ring Dynamics in a Tetraphenylethylene-Bridged Metal-Organic Framework: Implications for the Mechanism of Aggregation-Induced Emission

Molecules that exhibit emission in the solid state, especially those known as aggregation-induced emission (AIE) chromophores, have found applications in areas as varied as light-emitting diodes and biological sensors. Despite numerous studies, the mechanism of fluorescence quenching in AIE chromophores is still not completely understood. To this end, much interest has focused on understanding the low-frequency vibrational dynamics of prototypical systems, such as tetraphenylethylene (TPE), in the hope that such studies would provide more general principles toward the design of new sensors and electronic materials. We hereby show that a perdeuterated TPE-based metal-organic framework (MOF) serves as an excellent platform for studying the low-energy vibrational modes of AIE-type chromophores. In particular, we use solid-state (2)H and (13)C NMR experiments to investigate the phenyl ring dynamics of TPE cores that are coordinatively trapped inside a MOF and find a phenyl ring flipping energy barrier of 43(6) kJ/mol. DFT calculations are then used to deconvolute the electronic and steric contributions to this flipping barrier. Finally, we couple the NMR and DFT studies with variable-temperature X-ray diffraction experiments to propose that both the ethylenic C═C bond twist and the torsion of the phenyl rings are important for quenching emission in TPE, but that the former may gate the latter. To conclude, we use these findings to propose a set of design criteria for the development of tunable turn-on porous sensors constructed from AIE-type molecules, particularly as applied to the design of new multifunctional MOFs.

Conformational locking by design: relating strain energy with luminescence and stability in rigid metal-organic frameworks.

Minimization of the torsional barrier for phenyl ring flipping in a metal-organic framework (MOF) based on the new ethynyl-extended octacarboxylate ligand H(8)TDPEPE leads to a fluorescent material with a near-dark state. Immobilization of the ligand in the rigid structure also unexpectedly causes significant strain. We used DFT calculations to estimate the ligand strain energies in our and all other topologically related materials and correlated these with empirical structural descriptors to derive general rules for trapping molecules in high-energy conformations within MOFs. These studies portend possible applications of MOFs for studying fundamental concepts related to conformational locking and its effects on molecular reactivity and chromophore photophysics.

Ligand Redox Non-innocence in the Stoichiometric Oxidation of Mn2(2,5-dioxidoterephthalate) (Mn-MOF-74)

Unsaturated metal sites within the nodes of metal-organic frameworks (MOFs) can be interrogated by redox reagents common to small molecule chemistry. We show, for the first time, that an analogue of the iconic M2(2,5-dioxidoterephthalate) (M2DOBDC, MOF-74) class of materials can be stoichiometrically oxidized by one electron per metal center. The reaction of Mn2DOBDC with C6H5ICl2 produces the oxidized material Cl2Mn2DOBDC, which retains crystallinity and porosity. Surprisingly, magnetic measurements, X-ray absorption, and infrared spectroscopic data indicate that the Mn ions maintain a formal oxidation state of +2, suggesting instead the oxidation of the DOBDC(4-) ligand to the quinone DOBDC(2-). These results describe the first example of ligand redox non-innocence in a MOF and a rare instance of stoichiometric electron transfer involving the metal nodes. The methods described herein offer a synthetic toolkit that will be of general use for further explorations of the redox reactivity of MOF nodes.

Supramolecular chromotropism of the crystalline phases of 4,5,6,7-tetrafluorobenzo-2,1,3-telluradiazole.

The remarkable effect that secondary bonding interactions can have on the macroscopic properties of a material is illustrated by two polymorphs of the title compound. The phase which is most stable under ambient pressure and temperature consists of puckered supramolecular ribbon polymers assembled by Te--N secondary bonding interactions and displays a characteristic red-orange color. A second yellow phase consists of ribbons with alternating short and long intermolecular Te--N secondary bonding distances and is metastable; at 127 °C the material undergoes an exothermic irreversible transition to the red polymorph. A third phase consists of pyridine-solvated supramolecular dimers; it is also yellow and transforms into the red phase after the crystals effloresce. Computational DFT studies indicate that the observed changes in optical properties are related to intermolecular mixing of π orbitals enabled by the supramolecular interactions and the symmetry of the supramolecular synthon.

Valence electronic structure of benzo-2,1,3-chalcogenadiazoles studied by photoelectron spectroscopy and density functional theory

The He I photoelectron spectra of benzo-2,1,3-thia-, selena-, and telluradiazole were measured, and the observed ionization bands were assigned by comparison with the results of DFT calculations. Whereas the B3LYP exchange-correlation functional provided orbital energies that permitted a preliminary assignment by application of Koopmans theorem, a more-accurate interpretation was established by calculation of the vertical ionization energies with the PW91 functional and analysis of the correlation of energy levels along the homologous series. This strategy clarified earlier disagreements in the assignment of the spectrum of benzo-2,1,3-thiadiazole.

Thermodynamic and Kinetic Study of Cleavage of the N–O Bond of N-Oxides by a Vanadium(III) Complex: Enhanced Oxygen Atom Transfer Reaction Rates for Adducts of Nitrous Oxide and Mesityl Nitrile Oxide

Thermodynamic, kinetic, and computational studies are reported for oxygen atom transfer (OAT) to the complex V(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2, 1) from compounds containing N-O bonds with a range of BDEs spanning nearly 100 kcal mol(-1): PhNO (108) > SIPr/MesCNO (75) > PyO (63) > IPr/N2O (62) > MesCNO (53) > N2O (40) > dbabhNO (10) (Mes = mesityl; SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene; Py = pyridine; IPr = 1,3-bis(diisopropyl)phenylimidazol-2-ylidene; dbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene). Stopped flow kinetic studies of the OAT reactions show a range of kinetic behavior influenced by both the mode and strength of coordination of the O donor and its ease of atom transfer. Four categories of kinetic behavior are observed depending upon the magnitudes of the rate constants involved: (I) dinuclear OAT following an overall third order rate law (N2O); (II) formation of stable oxidant-bound complexes followed by OAT in a separate step (PyO and PhNO); (III) transient formation and decay of metastable oxidant-bound intermediates on the same time scale as OAT (SIPr/MesCNO and IPr/N2O); (IV) steady-state kinetics in which no detectable intermediates are observed (dbabhNO and MesCNO). Thermochemical studies of OAT to 1 show that the V-O bond in O≡V(N[t-Bu]Ar)3 is strong (BDE = 154 ± 3 kcal mol(-1)) compared with all the N-O bonds cleaved. In contrast, measurement of the N-O bond in dbabhNO show it to be especially weak (BDE = 10 ± 3 kcal mol(-1)) and that dissociation of dbabhNO to anthracene, N2, and a (3)O atom is thermodynamically favorable at room temperature. Comparison of the OAT of adducts of N2O and MesCNO to the bulky complex 1 show a faster rate than in the case of free N2O or MesCNO despite increased steric hindrance of the adducts.

Two-Step Binding of O2 to a Vanadium(III) Trisanilide Complex To Form a Non-Vanadyl Vanadium(V) Peroxo Complex

Treatment of V(N[(t)Bu]Ar)(3) (1) (Ar = 3,5-Me(2)C(6)H(3)) with O(2) was shown by stopped-flow kinetic studies to result in the rapid formation of (η(1)-O(2))V(N[(t)Bu]Ar)(3) (2) (ΔH(‡) = 3.3 ± 0.2 kcal/mol and ΔS(‡) = -22 ± 1 cal mol(-1) K(-1)), which subsequently isomerizes to (η(2)-O(2))V(N[(t)Bu]Ar)(3) (3) (ΔH(‡) = 10.3 ± 0.9 kcal/mol and ΔS(‡) = -6 ± 4 cal mol(-1) K(-1)). The enthalpy of binding of O(2) to form 3 is -75.0 ± 2.0 kcal/mol, as measured by solution calorimetry. The reaction of 3 and 1 to form 2 equiv of O≡V(N[(t)Bu]Ar)(3) (4) occurs by initial isomerization of 3 to 2. The results of computational studies of this rearrangement (ΔH = 4.2 kcal/mol; ΔH(‡) = 16 kcal/mol) are in accord with experimental data (ΔH = 4 ± 3 kcal/mol; ΔH(‡) = 14 ± 3 kcal/mol). With the aim of suppressing the formation of 4, the reaction of O(2) with 1 in the presence of (t)BuCN was studied. At -45 °C, the principal products of this reaction are 3 and (t)BuC(═O)N≡V(N[(t)Bu]Ar)(3) (5), in which the bound nitrile has been oxidized. Crystal structures of 3 and 5 are reported.

Precise Steric Control over 2D versus 3D Self-Assembly of Antimony(III) Alkoxide Cages through Strong Secondary Bonding Interactions

Antimony(III) alkoxide cages were designed as building blocks for predictable supramolecular self-assembly. Supramolecular synthons featuring two Sb···O secondary bonding interactions (SBIs), each SBI stronger than 30 kJ/mol, were used to drive the formation of the supramolecular architectures. Judicious choice of pendant groups provided predictable control over the formation of self-assembled 3D columnar helices, which crystallized with hollow morphologies, or a self-assembled 2D bilayer. The Sb-O stretching frequency provides a spectroscopic signature of Sb···O SBI formation.

Improved Synthesis of N-Methylcadaverine

Alkaloids compose a large class of natural products, and mono-methylated polyamines are a common intermediate in their biosynthesis. In order to evaluate the role of selectively methylated natural products, synthetic strategies are needed to prepare them. Here, N-methylcadaverine is prepared in 37.3% yield in three steps. The alternative literature two-step strategy resulted in reductive deamination to give N-methylpiperidine as determined by the single crystal structure. A straightforward strategy to obtain the mono-alkylated aliphatic diamine, cadaverine, which avoids potential side-reactions, is demonstrated.