Anthony J. Ryan

Self‐Assembled Block Copolymer Aggregates: From Micelles to Vesicles and their Biological Applications

The ability of amphiphilic block copolymers to self-assemble in selective solvents has been widely studied in academia and utilized for various commercial products. The self-assembled polymer vesicle is at the forefront of this nanotechnological revolution with seemingly endless possible uses, ranging from biomedical to nanometer-scale enzymatic reactors. This review is focused on the inherent advantages in using polymer vesicles over their small molecule lipid counterparts and the potential applications in biology for both drug delivery and synthetic cellular reactors.

Self-motile colloidal particles: from directed propulsion to random walk

The motion of an artificial microscale swimmer that uses a chemical reaction catalyzed on its own surface to achieve autonomous propulsion is fully characterized experimentally. It is shown that at short times it has a substantial component of directed motion, with a velocity that depends on the concentration of fuel molecules. At longer times, the motion reverts to a random walk with a substantially enhanced diffusion coefficient. Our results suggest strategies for designing artificial chemotactic systems.

Aqueous Dispersion Polymerization: A New Paradigm for in Situ Block Copolymer Self-Assembly in Concentrated Solution

Reversible addition-fragmentation chain transfer polymerization has been utilized to polymerize 2-hydroxypropyl methacrylate (HPMA) using a water-soluble macromolecular chain transfer agent based on poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC). A detailed phase diagram has been elucidated for this aqueous dispersion polymerization formulation that reliably predicts the precise block compositions associated with well-defined particle morphologies (i.e., pure phases). Unlike the ad hoc approaches described in the literature, this strategy enables the facile, efficient, and reproducible preparation of diblock copolymer spheres, worms, or vesicles directly in concentrated aqueous solution. Chain extension of the highly hydrated zwitterionic PMPC block with HPMA in water at 70 °C produces a hydrophobic poly(2-hydroxypropyl methacrylate) (PHPMA) block, which drives in situ self-assembly to form well-defined diblock copolymer spheres, worms, or vesicles. The final particle morphology obtained at full monomer conversion is dictated by (i) the target degree of polymerization of the PHPMA block and (ii) the total solids concentration at which the HPMA polymerization is conducted. Moreover, if the targeted diblock copolymer composition corresponds to vesicle phase space at full monomer conversion, the in situ particle morphology evolves from spheres to worms to vesicles during the in situ polymerization of HPMA. In the case of PMPC(25)-PHPMA(400) particles, this systematic approach allows the direct, reproducible, and highly efficient preparation of either block copolymer vesicles at up to 25% solids or well-defined worms at 16-25% solids in aqueous solution.

Spinodal-assisted crystallization in polymer melts

Recent experiments in some polymer melts quenched below the melting temperature have reported spinodal kinetics in small-angle x-ray scattering before the emergence of a crystalline structure. To explain these observations we propose that the coupling between density and chain conformation induces a liquid-liquid binodal within the equilibrium liquid-crystalline solid coexistence region. A simple phenomenological theory is developed to illustrate this idea, and several experimentally testable consequences are discussed. Shear is shown to enhance the kinetic role of the hidden binodal.

Polymer crystallization in 25-nm spheres

Crystallization within the discrete spheres of a block copolymer mesophase was studied by time-resolved x-ray scattering. The cubic packing of microdomains, established by self-assembly in the melt, is preserved throughout crystallization by strong interblock segregation even though the amorphous matrix block is well above its glass transition temperature. Homogeneous nucleation within each sphere yields isothermal crystallizations which follow first-order kinetics, contrasting with the sigmoidal kinetics normally exhibited in the quiescent crystallization of bulk polymers.

Recent experiments on a small‐angle/wide‐angle X‐ray scattering beam line at the ESRF

Recent results using a new combined small-angle/wide-angle X-ray scattering (SAXS/WAXS) beam line at the European Synchrotron Radiation Source (ESRF) will be presented. This beam line is specifically designed to be able to handle complicated sample environments required to perform time-resolved experiments mimicking processing conditions used in material science. Besides the attention that has been given to the interfacing of these sample environments to the beam line data acquisition system also the developments in detector technology will be discussed. The influence that a high count rate and low noise WAXS detector can have on the accuracy of experimental results in polymer crystallisation will be shown. It is shown that it is feasible to detect crystalline volume fractions as low as 10 -3 -10 -4 in polymeric systems.

Sterilizable Gels from Thermoresponsive Block Copolymer Worms

Biocompatible hydrogels have many applications, ranging from contact lenses to tissue engineering scaffolds. In most cases, rigorous sterilization is essential. Herein we show that a biocompatible diblock copolymer forms wormlike micelles via polymerization-induced self-assembly in aqueous solution. At a copolymer concentration of 10.0 w/w %, interworm entanglements lead to the formation of a free-standing physical hydrogel at 21 °C. Gel dissolution occurs on cooling to 4 °C due to an unusual worm-to-sphere order-order transition, as confirmed by rheology, electron microscopy, variable temperature (1)H NMR spectroscopy, and scattering studies. Moreover, this thermo-reversible behavior allows the facile preparation of sterile gels, since ultrafiltration of the diblock copolymer nanoparticles in their low-viscosity spherical form at 4 °C efficiently removes micrometer-sized bacteria; regelation occurs at 21 °C as the copolymer chains regain their wormlike morphology. Biocompatibility tests indicate good cell viabilities for these worm gels, which suggest potential biomedical applications.

Development of biodegradable electrospun scaffolds for dermal replacement

Our objective is to develop a synthetic biodegradable replacement dermal substitute for tissue engineering of skin and oral mucosa. Our in vivo criteria were that candidate scaffolds should allow surrounding cells to migrate fully into the scaffolds, enabling vasculogenesis and remodelling without invoking a chronic inflammatory response. We examined a total of six experimental electrospun polymer scaffolds: (1) poly-l-lactide (PLLA); (2) PLLA+10% oligolactide; (3) PLLA+rhodamine and (4-6) three poly(d,l)-lactide-co-glycolide (PLGA) random multiblock copolymers, with decreasing lactide/glycolide mole fractions (85:15, 75:25 and 50:50). These were evaluated for degradation in vitro up to 108 days and in vivo in adult male Wistar rats from 4 weeks to 12 months. In vivo, all scaffolds permitted good cellular penetration, with no adverse inflammatory response outside the scaffold margin and with no capsule formation around the periphery. The breakdown rate for each scaffold in vitro versus in vivo was similar, and an increase in the ratio of polyglycolide to polylactide correlated with an increase in breakdown rate, as expected. Scaffolds of PLLA were stable in vivo even after 12 months whereas scaffolds fabricated from PLGA 85:15 and 75:25 revealed a 50% loss of mass after 4 and 3 months, respectively. In vitro PLGA 85:15 and 75:25 scaffolds were able to support keratinocyte, fibroblast and endothelial cell growth and extracellular matrix production, with evidence of new collagen production after 7 days. In conclusion, the data supports the development of PLGA 85:15 and 75:25 electrospun polymer scaffolds as potential degradable biomaterials for dermal replacement.

RAFT aqueous dispersion polymerization yields poly(ethylene glycol)-based diblock copolymer nano-objects with predictable single phase morphologies.

A poly(ethylene glycol) (PEG) macromolecular chain transfer agent (macro-CTA) is prepared in high yield (>95%) with 97% dithiobenzoate chain-end functionality in a three-step synthesis starting from a monohydroxy PEG113 precursor. This PEG113-dithiobenzoate is then used for the reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA). Polymerizations conducted under optimized conditions at 50 °C led to high conversions as judged by 1H NMR spectroscopy and relatively low diblock copolymer polydispersities (Mw/Mn < 1.25) as judged by GPC. The latter technique also indicated good blocking efficiencies, since there was minimal PEG113 macro-CTA contamination. Systematic variation of the mean degree of polymerization of the core-forming PHPMA block allowed PEG113-PHPMAx diblock copolymer spheres, worms, or vesicles to be prepared at up to 17.5% w/w solids, as judged by dynamic light scattering and transmission electron microscopy studies. Small-angle X-ray scattering (SAXS) analysis revealed that more exotic oligolamellar vesicles were observed at 20% w/w solids when targeting highly asymmetric diblock compositions. Detailed analysis of SAXS curves indicated that the mean number of membranes per oligolamellar vesicle is approximately three. A PEG113-PHPMAx phase diagram was constructed to enable the reproducible targeting of pure phases, as opposed to mixed morphologies (e.g., spheres plus worms or worms plus vesicles). This new RAFT PISA formulation is expected to be important for the rational and efficient synthesis of a wide range of biocompatible, thermo-responsive PEGylated diblock copolymer nano-objects for various biomedical applications.

Time resolved simultaneous small- and wide-angle X-ray scattering during polyethylene deformation. II. Cold drawing of linear polyethylene

The cold drawing behaviour of a range of unoriented linear polyethylenes was investigated using the technique of simultaneous small- and wide-angle X-ray scattering during deformation. The influences of molecular weight and thermal history were studied. The role of both variables was found to be highly important since by altering the percentage crystallinity they influenced the relative amounts of inter- and intra-lamellar deformation. The micromechanical deformation processes governing the different regions of the load-extension curve were found to be the same as for cold-drawn ethylene-α-olefin copolymers, demonstrating the fundamental similarity between all types of unoriented polyethylene PE.