Anton Ficai

Synthesis and characterization of collagen/hydroxyapatite: magnetite composite material for bone cancer treatment

Our purpose was obtaining and characterizing a complex composite system with multifunctional role: bone graft material and hyperthermia generator necessary for bone cancer therapy. The designed system was a magnetite enriched collagen/hydroxyapatite composite material, obtained by a co-precipitation method. Due to the applied electromagnetic field the magnetite will induce hyperthermia and cause tumoral cell apoptosis. The complex bone graft system was characterised by XRD, FTIR and SEM, while the hyperthermia was quantify by measuring the temperature increase due to the applied alternative electromagnetical field.

Montmorillonite-alginate nanocomposite as a drug delivery system--incorporation and in vitro release of irinotecan.

The scope of the present study was the preparation and characterization of irinotecan nanocomposite beads based on montmorillonite (Mt) and sodium alginate (AL) as drug carriers. After irinotecan (I) incorporation into Mt, the resulting hybrid was compounded with alginate, and I-Mt-AL nanocomposite beads were obtained by ionotropic gelation technique. The structure and surface morphology of the hybrid and composite materials were established by means of X-ray diffraction (XRD), IR spectroscopy (FT-IR), thermal analysis (TG-DTA) and scanning electron microscopy (SEM). Irinotecan incorporation efficiency in Mt and in alginate beads was determined both by UV-vis spectroscopy and thermal analysis and was found to be high. The hybrid and composite materials were tested in vitro in simulated intestinal fluid (pH 7.4, at 37 °C) in order to establish if upon administering the beads at the site of a resected colorectal tumor, the delivery of the drug is sustained and can represent an alternative to the existing systemic chemotherapy. The in vitro drug release test results clearly suggested that Mt, and Mt along with AL were able to control the release of irinotecan by making it sustained, without any burst effect, and by reducing the released amount and the release rate. The nanocomposite beads may be a promising drug delivery system in chemotherapy.

Water dispersible cross-linked magnetic chitosan beads for increasing the antimicrobial efficiency of aminoglycoside antibiotics

The aim of this study was to obtain a nano-active system to improve antibiotic activity of certain drugs by controlling their release. Magnetic composite nanomaterials based on magnetite core and cross-linked chitosan shell were synthesized via the co-precipitation method and characterized by Fourier transform infrared spectroscopy (FT-IR), infrared microscopy (IRM), scanning electron microscopy (SEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The prepared magnetic composite nanomaterials exhibit a significant potentiating effect on the activity of two cationic (kanamycin and neomycin) drugs, reducing the amount of antibiotics necessary for the antimicrobial effect. The increase in the antimicrobial activity was explained by the fact that the obtained nanosystems provide higher surface area to volume ratio, resulting into higher surface charge density thus increasing affinity to microbial cell and also by controlling their release. In addition to the nano-effect, the positive zeta potential of the synthesized magnetite/cross-linked chitosan core/shell magnetic nanoparticles allows for a more favorable interaction with the usually negatively charged cell wall of bacteria. The novelty of the present contribution is just the revealing of this synergistic effect exhibited by the synthesized water dispersible magnetic nanocomposites on the activity of different antibiotics against Gram-positive and Gram-negative bacterial strains. The results obtained in this study recommend these magnetic water dispersible nanocomposite materials for applications in the prevention and treatment of infectious diseases.

Synthesis, characterization and in vitro assessment of the magnetic chitosan–carboxymethylcellulose biocomposite interactions with the prokaryotic and eukaryotic cells

Preparation and characterization of CS/Fe(3)O(4)/CMC composite scaffolds including the morphology, crystallinity, and the in vitro efficacy as antibiotic delivery vehicles as well as their influence on the eukaryotic cells are reported. The results demonstrated that the magnetic polymeric composite scaffolds are exhibiting structural and functional properties that recommend them for further applications in the biomedical field. They improve the activity of currently used antibiotics belonging to penicillins, macrolides, aminoglycosides, rifampicines and quinolones classes, representing potential macromolecular carriers for these antimicrobial substances, to achieve extracellular and intracellular targets. The obtained systems are not cytotoxic and do not influence the eukaryotic HCT8 cell cycle, representing potential tools for the delivery of drugs in a safe, effective and less expensive manner.

Magnetite nanoparticles for functionalized textile dressing to prevent fungal biofilms development

The purpose of this work was to investigate the potential of functionalized magnetite nanoparticles to improve the antibiofilm properties of textile dressing, tested in vitro against monospecific Candida albicans biofilms. Functionalized magnetite (Fe3O4/C18), with an average size not exceeding 20 nm, has been synthesized by precipitation of ferric and ferrous salts in aqueous solution of oleic acid (C18) and NaOH. Transmission electron microscopy, X-ray diffraction analysis, and differential thermal analysis coupled with thermo gravimetric analysis were used as characterization methods for the synthesized Fe3O4/C18. Scanning electron microscopy was used to study the architecture of the fungal biofilm developed on the functionalized textile dressing samples and culture-based methods for the quantitative assay of the biofilm-embedded yeast cells. The optimized textile dressing samples proved to be more resistant to C. albicans colonization, as compared to the uncoated ones; these functionalized surfaces-based approaches are very useful in the prevention of wound microbial contamination and subsequent biofilm development on viable tissues or implanted devices.

Biohybrid Nanostructured Iron Oxide Nanoparticles and Satureja hortensis to Prevent Fungal Biofilm Development

Cutaneous wounds are often superinfected during the healing process and this leads to prolonged convalescence and discomfort. Usage of suitable wound dressings is very important for an appropriate wound care leading to a correct healing. The aim of this study was to demonstrate the influence of a nano-coated wound dressing (WD) on Candida albicans colonization rate and biofilm formation. The modified WD was achieved by submerging the dressing pieces into a nanofluid composed of functionalized magnetite nanoparticles and Satureja hortensis (SO) essential oil (EO). Chemical composition of the EO was established by GC-MS. The fabricated nanostructure was characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Differential Thermal Analysis (DTA) and Fourier Transform-Infrared Spectroscopy (FT-IR). The analysis of the colonized surfaces using (Scanning Electron Microscopy) SEM revealed that C. albicans adherence and subsequent biofilm development are strongly inhibited on the surface of wound dressing fibers coated with the obtained nanofluid, comparing with regular uncoated materials. The results were also confirmed by the assay of the viable fungal cells embedded in the biofilm. Our data demonstrate that the obtained phytonanocoating improve the resistance of wound dressing surface to C. albicans colonization, which is often an etiological cause of local infections, impairing the appropriate wound healing.

Synthesis and characterization of COLL-PVA/HA hybrid materials with stratified morphology.

This work presents the synthesis of two hybrid materials: collagen (COLL)-polyvinyl alcohol (PVA) (1:2 wt) and collagen-polyvinyl alcohol/hydroxyapatite (HA) (1:2:3 wt). Starting from the above compositions, different kinds of composites were obtained based on the drying methods: controlled drying at 30°C and freeze drying. The materials were analysed by X-ray diffraction (XRD), Fourier transform infrared microscopy (FTIR) and scanning electron microscopy (SEM) as well as by measuring the density, porosity and absorption of xylene for each sample by Arthur method. Based on the SEM images, the freeze drying and the controlled drying could be clearly concluded to lead to porous and dense COLL-PVA/HA hybrid materials, respectively. Such materials have exhibited a stratified morphology, the distance between sheets increasing with the increase of the organic components content. Based on the literature data, the obtained COLL-PVA/HA composite materials are valuable bone grafts materials and drug delivery systems.

Multifunctional materials for bone cancer treatment

The purpose of this review is to present the most recent findings in bone tissue engineering. Special attention is given to multifunctional materials based on collagen and collagen–hydroxyapatite composites used for skin and bone cancer treatments. The multi-functionality of these materials was obtained by adding to the base regenerative grafts proper components, such as ferrites (magnetite being the most important representative), cytostatics (cisplatin, carboplatin, vincristine, methotrexate, paclitaxel, doxorubicin), silver nanoparticles, antibiotics (anthracyclines, geldanamycin), and/or analgesics (ibuprofen, fentanyl). The suitability of complex systems for the intended applications was systematically analyzed. The developmental possibilities of multifunctional materials with regenerative and curative roles (antitumoral as well as pain management) in the field of skin and bone cancer treatment are discussed. It is worth mentioning that better materials are likely to be developed by combining conventional and unconventional experimental strategies.

In vitro activity of the new water-dispersible Fe3O4@usnic acid nanostructure against planktonic and sessile bacterial cells

A new water-dispersible nanostructure based on magnetite (Fe3O4) and usnic acid (UA) was prepared in a well-shaped spherical form by a precipitation method. Nanoparticles were well individualized and homogeneous in size. The presence of Fe3O4@UA was confirmed by transmission electron microscopy, Fourier transform-infrared spectroscopy, and X-ray diffraction. The UA was entrapped in the magnetic nanoparticles during preparation and the amount of entrapped UA was estimated by thermogravimetric analysis. Fabricated nanostructures were tested on planktonic cells growth (minimal inhibitory concentration assay) and biofilm development on Gram-positive Staphylococcusaureus (S.aureus),Enterococcus faecalis (E.faecalis) and Gram-negative Escherichia coli (E.coli),Pseudomonasaeruginosa (P.aeruginosa) reference strains. Concerning the influence of Fe3O4@UA on the planktonic bacterial cells, the functionalized magnetic nanoparticles exhibited a significantly improved antimicrobial activity against E.faecalis and E.coli, as compared with the Fe3O4 control. The UA incorporated into the magnetic nanoparticles exhibited a very significant inhibitory effect on the biofilm formed by the S.aureus and E.faecalis, on a wide range of concentrations, while in case of the Gram-negative microbial strains, the UA-loaded nanoparticles inhibited the E.coli biofilm development, only at high concentrations, while for P.aeruginosa biofilms, no inhibitory effect was observed. The obtained results demonstrate that the new water-dispersible Fe3O4@UA nanosystem, combining the advantages of the intrinsic antimicrobial features of the UA with the higher surface to volume ratio provided by the magnetic nanocarrier dispersible in water, exhibits efficient antimicrobial activity against planktonic and adherent cells, especially on Gram-positive strains.

Modified wound dressing with phyto-nanostructured coating to prevent staphylococcal and pseudomonal biofilm development

This paper reports a newly fabricated nanophyto-modified wound dressing with microbicidal and anti-adherence properties. Nanofluid-based magnetite doped with eugenol or limonene was used to fabricate modified wound dressings. Nanostructure coated materials were characterized by TEM, XRD, and FT-IR. For the quantitative measurement of biofilm-embedded microbial cells, a culture-based method for viable cell count was used. The optimized textile dressing samples proved to be more resistant to staphylococcal and pseudomonal colonization and biofilm formation compared to the uncoated controls. The functionalized surfaces for wound dressing seems to be a very useful tool for the prevention of wound microbial contamination on viable tissues.