Antonieta García-Murillo

Eu-Doped BaTiO3 Powder and Film from Sol-Gel Process with Polyvinylpyrrolidone Additive

Transparent BaTiO3:Eu3+ films were prepared via a sol-gel method and dip-coating technique, using barium acetate, titanium butoxide, and polyvinylpyrrolidone (PVP) as modifier viscosity. BaTiO3:Eu3+ films ~500 nm thick, crystallized after thermal treatment at 700 ºC. The powders revealed spherical and rod shape morphology. The optical quality of films showed a predominant band at 615 nm under 250 nm excitation. A preliminary luminescent test provided the properties of the Eu3+ doped BaTiO3.

Hydrothermal Synthesis and Characterization of Europium-doped Barium Titanate Nanocrystallites

Barium titanate nanocrystallites were synthesized by a hydrothermal technique from barium chloride and tetrabutyl titanate. Single-crystalline cubic perovskite BaTiO3 consisting of spherical particles with diameters ranging from 10 to 30 nm was easily achieved by this route. In order to study the influence of the synthesis process on the morphology and the optical properties, barium titanate was also prepared by a solid-state reaction. In this case, only the tetragonal phase which crystallizes above 900° was observed. High-temperature X-ray diffraction measurements were performed to investigate the crystallization temperatures as well as the particle sizes via the Scherrer formula. The lattice vibrations were evidenced by infrared spectroscopy. Eu3+ was used as a structural probe, and the luminescence properties recorded from BaTiO3:Eu3+and elaborated by a solid-state reaction and hydrothermal process were compared. The reddish emission of the europium is increased by the nanometric particles.

Structural studies of BaTiO3:Er3+ and BaTiO3:Yb3+ powders synthesized by hydrothermal method

Erbium and ytterbium doped barium titanate nanopowders were prepared using the hydrothermal method. A barium titanate structure doped with rare earth ions manifested new characteristics and improved the field of application of optical devices such as trichromatic tubes, LCD displays, lamps, and infrared lasers. In this work, BaTiO3:Er3+ and BaTiO3:Yb3+ were prepared using barium chloride [BaCl2], titanium butoxide [C16H36O4Ti], erbium chloride [ErCl3] and ytterbium chloride [YbCl3] as precursors. Anhydrous methanol was employed as a solvent. Metallic potassium was used to promote solubility in the system and increase the pH to 13. This method yielded the formation of a predominantly cubic structure in both Er3+ and Yb3+ doped BaTiO3 powders. Characteristic bondings of BaTiO3 were observed with FT-IR spectroscopy. The predominantly cubic structure was confirmed by X-ray diffraction and micro-Raman analyses. The particle size (∼30 nm) was estimated using the Scherrer equation and X-ray diffraction data. The results were presented and discussed.