Arica A. Lubin

Continuous, Real-Time Monitoring of Cocaine in Undiluted Blood Serum via a Microfluidic, Electrochemical Aptamer-Based Sensor

The development of a biosensor system capable of continuous, real-time measurement of small-molecule analytes directly in complex, unprocessed aqueous samples has been a significant challenge, and successful implementation has been achieved for only a limited number of targets. Toward a general solution to this problem, we report here the Microfluidic Electrochemical Aptamer-based Sensor (MECAS) chip wherein we integrate target-specific DNA aptamers that fold, and thus generate an electrochemical signal, in response to the analyte with a microfluidic detection system. As a model, we demonstrate the continuous, real-time (approximately 1 min time resolution) detection of the small-molecule drug cocaine at near physiological, low micromolar concentrations directly in undiluted, otherwise unmodified blood serum. We believe our approach of integrating folding-based electrochemical sensors with miniaturized detection systems may lay the groundwork for the real-time, point-of-care detection of a wide variety of molecular targets.

Single-step electronic detection of femtomolar DNA by target-induced strand displacement in an electrode-bound duplex

We report a signal-on, electronic DNA (E-DNA) sensor that is label-free and achieves a subpicomolar detection limit. The sensor, which is based on a target-induced strand displacement mechanism, is composed of a “capture probe” attached by its 5′ terminus to a gold electrode and a 5′ methylene blue-modified “signaling probe” that is complementary at both its 3′ and 5′ termini to the capture probe. In the absence of target, hybridization between the capture and signaling probes minimizes contact between the methylene blue and electrode surface, limiting the observed redox current. Target hybridization displaces the 5′ end of the signaling probe, generating a short, flexible single-stranded DNA element and producing up to a 7-fold increase in redox current. The observed signal gain is sufficient to achieve a demonstrated (not extrapolated) detection limit of 400 fM, which is among the best reported for single-step electronic DNA detection. Moreover, because sensor fabrication is straightforward, the approach appears to provide a ready alternative to the more cumbersome femtomolar electrochemical assays described to date.

Optimization of Electrochemical Aptamer-Based Sensors via Optimization of Probe Packing Density and Surface Chemistry

Electrochemical, aptamer-based (E-AB) sensors, which are comprised of an electrode modified with surface immobilized, redox-tagged DNA aptamers, have emerged as a promising new biosensor platform. In order to further improve this technology we have systematically studied the effects of probe (aptamer) packing density, the AC frequency used to interrogate the sensor, and the nature of the self-assembled monolayer (SAM) used to passivate the electrode on the performance of representative E-AB sensors directed against the small molecule cocaine and the protein thrombin. We find that, by controlling the concentration of aptamer employed during sensor fabrication, we can control the density of probe DNA molecules on the electrode surface over an order of magnitude range. Over this range, the gain of the cocaine sensor varies from 60% to 200%, with maximum gain observed near the lowest probe densities. In contrast, over a similar range, the signal change of the thrombin sensor varies from 16% to 42% and optimal signaling is observed at intermediate densities. Above cut-offs at low hertz frequencies, neither sensor displays any significant dependence on the frequency of the alternating potential employed in their interrogation. Finally, we find that E-AB signal gain is sensitive to the nature of the alkanethiol SAM employed to passivate the interrogating electrode; while thinner SAMs lead to higher absolute sensor currents, reducing the length of the SAM from 6-carbons to 2-carbons reduces the observed signal gain of our cocaine sensor 10-fold. We demonstrate that fabrication and operational parameters can be varied to achieve optimal sensor performance and that these can serve as a basic outline for future sensor fabrication.

Effects of Probe Length, Probe Geometry, and Redox-Tag Placement on the Performance of the Electrochemical E-DNA Sensor

Previous work has described several reagentless, electrochemical DNA (E-DNA) sensing architectures comprised of an electrode-immobilized, redox-tagged probe oligonucleotide. Recent studies suggest that E-DNA signaling is predicated on hybridization-linked changes in probe flexibility, which will alter the efficiency with which the terminal redox tag strikes the electrode. This, in turn, suggests that probe length, probe geometry, and redox-tag placement will affect E-DNA signaling. To test this we have characterized E-DNA sensors comprised of linear or stem-loop probes of various lengths and with redox tags placed either distal to the electrode or internally within the probe sequence (proximal). We find that linear probes produce larger signal changes upon target binding than equivalent stem-loop probes. Likewise, long probes exhibit greater signal changes than short probes provided that the redox tag is placed proximal to the electrode surface. In contrast to their improved signaling, the specificity of long probes is poorer than that of short probes, suggesting that sensor optimization represents a trade off between sensitivity and specificity. Finally, we find that sensor response time and selectivity are only minimally affected by probe geometry or length. The results of this comparative study will help guide future designs and applications of these sensors.

Electrochemical Biosensors Employing an Internal Electrode Attachment Site and Achieving Reversible, High Gain Detection of Specific Nucleic Acid Sequences

Electrochemical DNA (E-DNA) sensors, which are rapid, reagentless, and readily integrated into microelectronics and microfluidics, appear to be a promising alternative to optical methods for the detection of specific nucleic acid sequences. Keeping with this, a large number of distinct E-DNA architectures have been reported to date. Most, however, suffer from one or more drawbacks, including low signal gain (the relative signal change in the presence of complementary target), signal-off behavior (target binding reduces the signaling current, leading to poor gain and raising the possibility that sensor fouling or degradation can lead to false positives), or instability (degradation of the sensor during regeneration or storage). To remedy these problems, we report here the development of a signal-on E-DNA architecture that achieves both high signal gain and good stability. This new sensor employs a commercially synthesized, asymmetric hairpin DNA as its recognition and signaling probe, the shorter arm of which is labeled with a redox reporting methylene blue at its free end. Unlike all prior E-DNA architectures, in which the recognition probe is attached via a terminal functional group to its underlying electrode, the probe employed here is affixed using a thiol group located internally, in the turn region of the hairpin. Hybridization of a target DNA to the longer arm of the hairpin displaces the shorter arm, allowing the reporter to approach the electrode surface and transfer electrons. The resulting device achieves signal increases of ∼800% at saturating target, a detection limit of just 50 pM, and ready discrimination between perfectly matched sequences and those with single nucleotide polymorphisms. Moreover, because the hairpin probe is a single, fully covalent strand of DNA, it is robust to the high stringency washes necessary to remove the target, and thus, these devices are fully reusable.