Armando Yukio Saga

Effect of etching and light-curing time on the shear bond strength of a resin-modified glass ionomer cement

The aim of this study was to assess the influence of etching and light-curing time on the shear bond strength (SBS) and adhesive remnant index (ARI) of a resin-modified glass ionomer cement (RMGIC) upon debonding of orthodontic brackets. Sixty-eight bovine permanent incisors were obtained and embedded in acrylic resin. Edgewise metallic brackets were bonded to the teeth with Fuji Ortho LC RMGIC. The specimens were randomly assigned to 4 groups, using the following etching and light-curing times: G1: 10% polyacrylic acid and 40 s (control); G2: 37% phosphoric acid and 40 s; G3: 10% polyacrylic acid and 50 s; and G4: 37% phosphoric acid and 50 s. Shear test was performed at 0.5 mm/min and the ARI was assessed. G2 (3.6 ± 0.98 MPa) presented significantly higher (p<0.05) SBS than G1 (2.76 ± 0.86 MPa) and G4 (2.86 ± 0.68 MPa), and there was no statistically significant difference (p>0.05) between G2 and G3 (2.94 ± 0.67 MPa). ARI presented prevalence of scores 2 and 3 in all groups. RMGIC SBS enhanced with 37% phosphoric acid etching and 40 s light-curing time, but this did not occur when the light-curing time was increased, regardless of the acid used. RMGIC presented prevalence of failures at the adhesive/bracket interface.

Treatment of an adult with several missing teeth and atrophic old mandibular first molar extraction sites

This report describes the orthodontic treatment of a woman, aged 34 years 2 months, with several missing teeth and atrophic mandibular first molar extraction sites. We had planned to close the spaces from the missing maxillary canines with mesial movement of the premolars and molars. In the mandibular arch, protraction of the second molars into first molar extraction sites and reduction of the mandibular incisor protrusion were performed. No miniscrews or bone plates were used. A modified helical loop was used, and it can be considered a simple and an efficient orthodontic method of closing the spaces without mesial or lingual tipping and rotation. Pleasing esthetic and functional results were achieved.

Orthodontic-prosthetic treatment of an adult with a severe Class III malocclusion.

This case report describes the treatment of a 37-year-old woman with multiple restored and missing teeth, a Class III subdivision malocclusion, and complete dental crossbite. Treatment options included orthognathic surgery and an orthodontic-prosthetic approach. The patient opted for nonsurgical treatment with space opening for prosthetic replacement of the first maxillary molars.

Orthodontic intrusion of maxillary incisors: a 3D finite element method study

Objective: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. Methods: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). Results and Conclusions: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution.

Clinical challenges in treating a patient with deviated dental midlines and delayed root development of the mandibular left second premolar

This case report describes the treatment of a girl, aged 13.3 years, with a concave face and a Class I relationship on the right and Class III on the left at the first molars. The left canines were in full Class II occlusion. The overbite was excessive at 80%. The maxillary dental midline was deviated 2.0 mm to the right, and the mandibular dental midline was 3.0 mm on the opposite side with a 5-mm deviation between both arches. There was a -2-mm mandibular arch length discrepancy, but, considering the intrabony left second premolar with root-delayed development, the arch length discrepancy was -8 mm. The incisors were also retroclined. A nonextraction treatment plan was used. When space to the left of the intrabony second premolar was opened, the tooth erupted passively, and the root had a normal length. The esthetic results were functional and pleasing.

Valores Referenciais para Procedimentos Odontológicos (VRPO) em Ortodontia

INTRODUCTION: The cost of orthodontic treatment is a very important issue. The aim of this study was to analyze the current Indicative Values for Dental Procedures (IVDP) for orthodontic procedures. METHODS: Laws, dental entities papers and scientific literature were utilized. RESULTS: Laws are too general and only offer abstract parameters when define remunerations. Current IVDP vary in the same State, according to the consultant entity. Dental entities interpret that general clinicians can practice Corrective Orthodontics, but new scientific studies begin to question this understanding. The Brazilian Association of Orthodontics and Dentofacial Orthopedics (ABOR) suggests that IVDP for orthodontic specialty must be formulated. CONCLUSION: Current IVDP are not standardized and are below the correct values for orthodontic procedures, because they are the mean of general clinicians and orthodontists remunerations; and ABOR is legally and ethically supported to claim specific IVDP for orthodontic specialty.

Early interception of mandibular shifting: A longitudinal approach from deciduous through mixed and permanent dentitions

A Class II malocclusion with a unilateral posterior crossbite in the late deciduous dentition is a challenging type of malocclusion to intercept. The objective is to analyze the long-term changes in a patient with a skeletal Class II division 1 malocclusion. A 5-year-old female child who was referred from a pediatric dentist came for consultation. Correction of posterior crossbite involves expansion of the maxillary arch with the aim of removal of occlusal interferences and elimination of the functional shift of the mandible. The treatment comprised three stages: (1) Expansion of the maxillary arch was performed with a modified Haas palatal expander and the clinical procedures thus resulted in improved facial symmetry and satisfactory functional occlusion in the mixed dentition (8 years 10 months). (2) Distalization of maxillary first molars was done with a Kloehn type headgear and a lip bumper was placed in the mandible to maintain the arch perimeter (12 years). (3) A 0.022 inch × 0.028 inch standard edgewise fixed appliance was used for comprehensive orthodontic treatment and the objectives were accomplished (14 years 5 months). The results showed great improvements in function and esthetics, and posttreatment stability was good after 7 years and 5 months.

An interview with Rodrigo F. Viecilli

Dental Press J Orthod. 2016 Sept-Oct;21(5):26-38 26 How to cite this interview: Viecilli RF. An interview with Rodrigo F. Viecilli. Dental Press J Orthod. 2016 Sept-Oct;21(5):26-38. DOI: http://dx.doi.org/10.1590/2177-6709.21.5.026-038.int Submitted: February 07, 2016 Revised and accepted: February 22, 2016 Early in the 2000, digital communication brought me a new friend. We haven’t studied together or been presented by any common friends. Along lines and lines of conversation, I met a young orthodontist from Canoas/RS, who even without having studied in one of the traditional Mechanics schools in Brazil, knew it deeply. Over time, I learned his story; he had studied Engineering and, motivated by his parents, graduated in Dentistry and took specialization in Orthodontics. The thirst for knowledge led him to, by his own, contact Dr Charles Burstone, who, by the time, got impressed and invited him to take Masters in Orthodontics and PhD in the USA, being one of the first Brazilian orthodontists with this title from an American university. Besides being awarded with the doctor of philosophy degree, by the Indiana University, he was also the first Brazilian to receive one of the most important award from the American Association of Orthodontics, in 2009. For his paper “Orthodontic mechanotransduction and the role of the P2X7 receptor”, he received the Milo Hellman Award, granted to the best research of the year in the USA. Since then, he has been lecturing almost every year in the American Association of Orthodontics Annual Session, presenting 6 lectures in 7 years of congresses. He was professor of Orthodontics in the New York University and, recently, was hired by Loma Linda University, where he teaches full time and is responsible for the Biomechanics lab. He is diplomate by the American Board of Orthodontics, and in his free time he cooks and reads about philosophy. It is a great honor for me to have this opportunity to coordinate the interview with one of the great personalities of the Brazilian Orthodontics in the USA: My friend, Dr Rodrigo Viecilli.

Therapeutic approach to Class II, Division 1 malocclusion with maxillary functional orthopedics.

INTRODUCTION: Interceptive treatment of Class II, Division 1 malocclusion is a challenge orthodontists commonly face due to the different growth patterns they come across and the different treatment strategies they have available. OBJECTIVE: To report five cases of interceptive orthodontics performed with the aid of Klammts elastic open activator (KEOA) to treat Class II, Division 1 malocclusion. METHODS: Treatment comprehends one or two phases; and the use of functional orthopedic appliances, whenever properly recommended, is able to minimize dentoskeletal discrepancies with consequent improvement in facial esthetics during the first stage of mixed dentition. The triad of diagnosis, correct appliance manufacture and patients compliance is imperative to allow KEOA to contribute to Class II malocclusion treatment. RESULTS: Cases reported herein showed significant improvement in skeletal, dental and profile aspects, as evinced by cephalometric analysis and clinical photographs taken before, during and after interceptive orthodontics.

General dentist orthodontic practice in foreign legal systems

OBJECTIVE: General dentist orthodontic practice is a controversial issue and this paper aims to analyze it comparing foreign laws to Brazilian Legal System. METHODS: Regulations and scientific texts concerning orthodontic practice by general dentists, in Portuguese or English language, were sought. RESULTS AND CONCLUSION: Portugal clearly forbids general dentist orthodontic practice; United States of America do not clearly forbid general dentist orthodontic practice, but do regulate and promote campaigns to encourage public to seek specialist service; in Australia and England, corrective orthodontics are offered both by orthodontists and general dentists; it was not possible to evaluate how orthodontic services are provided in Eastern Europe; and the fact that general dentists are forbidden to practice corrective orthodontics in Brazilian Legal System is compatible to other countries policy.