Armin Kuebelbeck

Investigation of Modified Screen-Printing Al Pastes for Local Back Surface Field Formation

This paper reports on a low-cost screen-printing process to form a self-aligned local back surface field (LBSF) through dielectric rear surface passivation. The process involved formation of local openings through a dielectric (SiNx or stacked SiO2/SiNx) prior to full area Al screen-printing and a rapid firing. Conventional Al paste with glass frit degraded the SiNx surface passivation quality because of glass frit induced pinholes and etching of SiNx layer, and led to very thin LBSF regions. The same process with a fritless Al paste maintained the passivation quality of the SiNx, but did not provide an acceptably thick and uniform LBSF. Al pastes containing appropriate additives gave better LBSF because of the formation of a thicker and more uniform Al-BSF region. However, they exhibited somewhat lower internal back surface reflectance (<90%) compared to conventional Al paste on SiNx. More insight on these competing effects is provided by fabrication and analysis of complete solar cells