Arnaud Demortière

On-chip and freestanding elastic carbon films for micro-supercapacitors

Flexible power for flexible electronics A challenge for flexible electronics is to couple devices with power sources that are also flexible. Ideally, they could also be processed in a way that is compatible with current microfabrication technologies. Huang et al. deposited a relatively thick layer of TiC on top of an oxide-coated Si film. After chlorination, most, but importantly not all, of the TiC was converted into a porous carbon film that could be turned into an electrochemical capacitor. The carbon films were highly flexible, and the residual TiC acted as a stress buffer with the underlying Si film. The films could be separated from the Si to form free-floating films, with the TiC providing a support layer. Science, this issue p. 691 Porous carbon-based supercapacitors are directly fabricated onto silicon substrates. Integration of electrochemical capacitors with silicon-based electronics is a major challenge, limiting energy storage on a chip. We describe a wafer-scale process for manufacturing strongly adhering carbide-derived carbon films and interdigitated micro-supercapacitors with embedded titanium carbide current collectors, fully compatible with current microfabrication and silicon-based device technology. Capacitance of those films reaches 410 farads per cubic centimeter/200 millifarads per square centimeter in aqueous electrolyte and 170 farads per cubic centimeter/85 millifarads per square centimeter in organic electrolyte. We also demonstrate preparation of self-supported, mechanically stable, micrometer-thick porous carbon films with a Young’s modulus of 14.5 gigapascals, with the possibility of further transfer onto flexible substrates. These materials are interesting for applications in structural energy storage, tribology, and gas separation.

Low-Threshold Stimulated Emission Using Colloidal Quantum Wells

The use of colloidal semiconductor nanocrystals for optical amplification and lasing has been limited by the need for high input power densities. Here we show that colloidal nanoplatelets produce amplified spontaneous emission with thresholds as low as 6 μJ/cm(2) and gain as high as 600 cm(-1), both a significant improvement over colloidal nanocrystals; in addition, gain saturation occurs at pump fluences 2 orders of magnitude higher than the threshold. We attribute this exceptional performance to large optical cross-sections, slow Auger recombination rates, and narrow ensemble emission line widths.

On the Origin of Photoluminescence in Silicon Nanocrystals: Pressure-Dependent Structural and Optical Studies

A lack of consensus persists regarding the origin of photoluminescence in silicon nanocrystals. Here we report pressure-dependences of X-ray diffraction and photoluminescence from alkane-terminated colloidal particles. We determine the diamond-phase bulk modulus, observe multiple phase transitions, and importantly find a systematic photoluminescence red shift that matches the X(conduction)-to-Γ(valence) transition of bulk crystalline silicon. These results, reinforced by calculations, suggest that the efficient photoluminescence, frequently attributed to defects, arises instead from core-states that remain highly indirect despite quantum confinement.

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost-effective self-assembly of 80 nm Au nanoparticles (NPs) into large-domain, hexagonally close-packed arrays for high-sensitivity and high-fidelity surface-enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite-difference time-domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum-gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3-5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10(4) is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10(8) is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.

High-Pressure Structural Stability and Elasticity of Supercrystals Self-Assembled from Nanocrystals

We report here combined quasi-hydrostatic high-pressure small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD) studies on faceted 3D supercrystals (SCs) self-assembled from colloidal 7.0 nm spherical PbS nanocrystals (NCs). Diamond anvil cell (DAC) SAXS experiments in the pressure range from ambient to 12.5 GPa revealed nearly perfect structural stability of the SCs, with face-centered cubic organization of the NCs. Pressure-induced ordering (annealing effect) of the superstructure was observed. The ambient pressure bulk modulus of the SCs was calculated to be ∼5 GPa for compression and ∼14.5 GPa for decompression from fitting of Vinet and Birch-Murnaghan equations of state. XRD measurements revealed strong preferential crystallographic orientation of the NCs through all phase transformations to as high as 55 GPa without any indication of NC sintering. The first phase transition pressure of the NCs was found between 8.1 and 9.2 GPa and proceeds through homogeneous nucleation. Bulk modulus of PbS NCs was calculated to be ∼51 GPa based on fitting to the equations of state (K(PbS,bulk) ∼ 51-57 GPa). Closest surface-to-surface distance between the NCs in the SCs was calculated based on combined XRD and SAXS data, to reversibly tune from ∼1.56 nm to ∼0.9-0.92 nm and back to ∼1.36 nm in the ambient-12.5 GPa-ambient pressure cycle. The bulk modulus of the ligand matrix was extrapolated to be ∼2.2-2.95 GPa. These results show a general method of tuning NC interactions in packed nanoparticle solids.

Nematic-like Organization of Magnetic Mesogen- Hybridized Nanoparticles

A fluid nematic-like phase is induced in monodisperse iron oxide nanoparticles with a diameter of 3.3 nm. This supramolecular arrangement is governed by the covalent functionalization of the nanoparticle surface with cyanobiphenyl-based ligands as mesogenic promoters. The design and synthesis of these hybrid materials and the study of their mesogenic properties are reported. In addition, the modifications of the magnetic properties of the hybridized nanoparticles are investigated as a function of the different grafted ligands. Owing to the rather large interparticular distances (about 7 nm), the dipolar interaction between nanoparticles is shown to play only a minor role. Conversely, the surface magnetic anisotropy of the particles is significantly affected by the surface derivatization.

Colloidal nanocube supercrystals stabilized by multipolar Coulombic coupling

We explore microscopic principles governing the self-assembly of colloidal octylamine-coated platinum nanocubes solvated in toluene. Our experiments show that regular nanocubes with an edge length of l(RC) = 5.5 nm form supercrystals with simple cubic packing, while slightly truncated nanocubes with an edge length of l(TC) = 4.7 nm tend to arrange in fcc packing. We model by averaged force fields and atomistic molecular dynamics simulations the coupling forces between these nanocrystals. Our detailed analysis shows that the fcc packing, which for cubes has a lower density than simple cubic packing, is favored by the truncated nanocubes due to their Coulombic coupling by multipolar electrostatic fields, formed during charge transfer between the octylamine ligands and the Pt cores.

Reversible magnesium and aluminium ions insertion in cation-deficient anatase TiO2

In contrast to monovalent lithium or sodium ions, the reversible insertion of multivalent ions such as Mg2+ and Al3+ into electrode materials remains an elusive goal. Here, we demonstrate a new strategy to achieve reversible Mg2+ and Al3+ insertion in anatase TiO2, achieved through aliovalent doping, to introduce a large number of titanium vacancies that act as intercalation sites. We present a broad range of experimental and theoretical characterizations that show a preferential insertion of multivalent ions into titanium vacancies, allowing a much greater capacity to be obtained compared to pure TiO2. This result highlights the possibility to use the chemistry of defects to unlock the electrochemical activity of known materials, providing a new strategy for the chemical design of materials for practical multivalent batteries.

Silicon nanocrystals at elevated temperatures: Retention of photoluminescence and diamond silicon to β-silicon carbide phase transition

We report the photoluminescence (PL) properties of colloidal Si nanocrystals (NCs) up to 800 K and observe PL retention on par with core/shell structures of other compositions. These alkane-terminated Si NCs even emit at temperatures well above previously reported melting points for oxide-embedded particles. Using selected area electron diffraction (SAED), powder X-ray diffraction (XRD), liquid drop theory, and molecular dynamics (MD) simulations, we show that melting does not play a role at the temperatures explored experimentally in PL, and we observe a phase change to β-SiC in the presence of an electron beam. Loss of diffraction peaks (melting) with recovery of diamond-phase silicon upon cooling is observed under inert atmosphere by XRD. We further show that surface passivation by covalently bound ligands endures the experimental temperatures. These findings point to covalently bound organic ligands as a route to the development of NCs for use in high temperature applications, including concentrated solar cells and electrical lighting.

Ability of the marine bacterium Pseudomonas fluorescens BA3SM1 to counteract the toxicity of CdSe nanoparticles

UNLABELLED In the marine environment, bacteria from estuarine and coastal sediments are among the first targets of nanoparticle pollution; it is therefore relevant to improve the knowledge of interactions between bacteria and nanoparticles. In this work, the response of the marine bacterium Pseudomonas fluorescens BA3SM1 to CdSe nanocrystals (CdSe NPs) of 3nm (NP3) and 8nm (NP8) in diameter was evaluated through microscopic, physiological, biochemical and proteomic approaches. Transmission electron microscopy images showed that NP3 were able to penetrate the bacteria, while NP8 were highly concentrated around the cells, embedded in large exopolysaccharides. In our experimental conditions, both CdSe NP sizes induced a decrease in respiration during the stationary growth phase, while only NP8 caused growth retardation and a decrease in pyoverdine production. Proteomic analyses highlighted that the strain responded to CdSe NP toxicity by inducing various defence mechanisms such as cell aggregation, extracellular CdSe NP sequestration, effective protection against oxidative stress, modifications of envelope organization and properties, and cadmium export. In addition, BA3SM1 presented a biosorption capacity of 1.6×10(16)NP3/g dry weight and 1.7×10(15)NP8/g dry weight. This strain therefore appears as a promising agent for NP bioremediation processes. Proteomic data are available via ProteomeXchange with identifier PXD004012. BIOLOGICAL SIGNIFICANCE To the best of our knowledge, this is the first report focussing on the effects of CdSe colloidal nanocrystals (CdSe NPs) on a marine strain of Pseudomonas fluorescens. CdSe NPs are extensively used in the industry of renewable energies and it is regrettably expected that these pollutants will sometime soon appear in the marine environment through surface runoff, urban effluents and rivers. Bacteria living in estuarine and coastal sediments will be among the first targets of these new pollutants. The pseudomonads are frequently found in these ecosystems. They are involved in several biogeochemical cycles and are known for their high resistance to pollutants. Consequently, this study focussing on the effects of CdSe NPs on the marine strain P. fluorescens BA3SM1 is highly relevant for several reasons. First, it aims at improving knowledge about the interactions between bacteria and NPs. This is fundamental to effectively use NPs against pathogenic bacteria. Secondly, in spite of CdSe NP interactions with the bacterial cells, the strain BA3SM1 can develop various strategies to counteract CdSe NP toxicity and ensure its growth. It exhibits interesting properties to sequester CdSe NPs and it retains its ability to form biofilm. The strain therefore appears as a promising agent for NP bioremediation thanks to biofiltration processes. Finally, this study shows that CdSe NPs of 8nm in diameter cause a decrease in the secretion of siderophore pyoverdine, a secondary metabolite playing a key role in microbial ecology since it drives bacterial survival and competitiveness in ecosystems. Bacteria producing effective siderophores survive better in a Fe-deficient environment where they antagonize the growth of other microbes thought iron deprivation. Furthermore, siderophores are also employed as virulence factors in human pathogenic strains such as P. aeruginosa. Consequently, this study highlights that NPs can impact the secondary metabolism of bacteria with environmental and medical implications. In addition, in this work, Data-Dependant Acquisition (DDA) provided state of the art Mass Spectrometry data by Spectral Counting and MS1 Label-Free. The combination of these two well-known proteomic techniques including manual validations strengthened the identification and quantification of regulated proteins. Moreover, numerous correlations between proteomic analyses and other observations (physiological, biochemical, microscopic) consolidated our interpretations.