Arnaud Hélière

The ESA earth explorer EarthCARE mission

The EarthCARE (Earth Clouds, Aerosols and Radiation Explorer) mission has been recently selected as the 6th ESAs Earth Explorer Mission. The mission objective is to determine, in a radiatively consistent manner, the global distribution of vertical profiles of cloud and aerosol field characteristics. A major innovation of the EarthCARE mission is to include both active and passive instruments on a single platform, which allows for a complete 3-D spatial and temporal picture of the radiative flux field at the top of the atmosphere and the Earths surface to be developed. While the active instruments provide vertical cloud profiles, the passive instruments (mainly the multi-spectral imager) provide supplementary horizontal data to allow for the extrapolation of the 3-D cloud and aerosol characteristics. The EarthCARE payload is composed of four instruments: an Atmospheric backscatter Lidar, a Cloud Profiling Radar, a Multi-Spectral Imager and a Broad Band Radiometer. The mission baseline is a sun-synchronous orbit with an altitude around 450 km. The EarthCARE mission is a cooperative mission with Japan (JAXA and NiCT), which will provide the Cloud Profiling Radar. ESA will provide the ground segment and the rest of the space segment including the lidar, the imager and the broadband radiometer. The launch is planned for 2012.

The EarthCARE mission: Mission concept and lidar instrument pre-development

The earth clouds, aerosols, and radiation explorer mission has been selected as the 6th earth explorer mission of ESAs living planet programme [1]. A suite of four instruments, active and passive, will be embarked on the same satellite to measure cloud and aerosol properties simultaneously with TOA radiances in order to derive TOA fluxes in relation to clouds and aerosols.

Development status of the EarthCARE Mission and its atmospheric Lidar

The European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) are co-operating to develop as part of ESA’s Living Planet Programme, the third Earth Explorer Core Mission, EarthCARE, with the fundamental objective of improving the understanding of the processes involving clouds, aerosols and radiation in the Earth’s atmosphere. EarthCARE payload consists of two active and two passive instruments: an ATmospheric LIDar (ATLID), a Cloud Profiling Radar (CPR), a Multi-Spectral Imager (MSI) and a Broad-Band Radiometer (BBR). The four instruments data are processed individually and in a synergetic manner to produce a large range of products, which include vertical profiles of aerosols, liquid water and ice, observations of cloud distribution and vertical motion within clouds, and will allow the retrieval of profiles of atmospheric radiative heating and cooling. Operating in the UV range at 355 nm, ATLID provides atmospheric echoes with a vertical resolution up to 100 m from ground to an altitude of 40 km. Thanks to a high spectral resolution filtering, the lidar is able to separate the relative contribution of aerosol (Mie) and molecular (Rayleigh) scattering, which gives access to aerosol optical depth. Co-polarised and cross-polarised components of the Mie scattering contribution are also separated and measured on dedicated channels. This paper gives an overview of the mission science objective, the satellite configuration with its four instruments and details more specifically the implementation and development status of the Atmospheric Lidar. Manufacturing status and first equipment qualification test results, in particular for what concerns the laser transmitter development are presented.

Development of ATLID, the earthcare UV backscatter lidar

In the frame of the EarthCARE programme, Airbus Defence and Space SAS is currently developing one of the mission core instruments: the UV atmospheric lidar ATLID.

EarthCARE mission, overview, implementation approach, and development status

The European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) are co-operating to develop the EarthCARE satellite mission with the fundamental objective of improving the understanding of the processes involving clouds, aerosols and radiation in the Earths atmosphere in order to include them correctly and reliably in climate and numerical weather prediction models. The satellite will be placed in a Sun-Synchronous Orbit at about 400 Km altitude and14h00 mean local solar time. The payload consisting of a High Spectral Resolution UV Atmospheric LIDar (ATLID), a 94GHz Cloud Profiling Radar (CPR) with Doppler capability, a Multi-Spectral Imager (MSI) and a Broad-Band Radiometer will provide information on cloud and aerosol vertical structure of the atmosphere along the satellite track as well as information about the horizontal structures of clouds and radiant flux from sub-satellite cells. The presentation will cover the configuration of the satellite with its four instruments, the mission implementation approach, an overview of the ground segment and the overall mission development status.

Aspects of the EarthCARE satellite and its payload

EarthCARE is ESAs Earth Clouds Aerosols and Radiation Explorer and is a joint mission in collaboration with JAXA. The satellite will carry a suite of instruments which operate in synergy to provide simultaneous observations of clouds and aerosols and will lead to improved understanding and modelling of these factors as well as their role in climatology. Development of the four instrument payload, consisting of an Atmospheric Lidar (ATLID), a Cloud Profiling Radar (CPR), a Multi Spectral Imager (MSI) and a Broad Band Radiometer (BBR) has been continuing for some time now and all instruments have progressed beyond the preliminary design stage. The paper will describe the mission, the satellite and in particular the principles, performance and design evolution of the payload.

System definition of the ESA Earth Explorer WALES mission

WALES (Water vapour Lidar Experiment in Space) is one of the three candidate missions that are currently considered for the future ESA Earth Explorer missions. The objective of the mission is to provide better insight into the distribution of water vapour and aerosol in the upper troposphere and lower stratosphere for research and applications in climatology and numerical weather prediction. This is to be achieved by providing globally accurate profiles of water vapour concentration. A direct detection Differential Absorption Lidar has been studied in the frame of the WALES mission pre-phase A. The lidar is based on high power laser emitting several wavelengths in the 920-950 nm range, each wavelength being tunable and frequency locked. The backscatter signal is collected through a large telescope and filtered through narrow band filters. The concept and the expected performance of the instrument are discussed in this paper.

Earth cloud, aerosol, and radiation explorer optical payload development status

The European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) are co-operating to develop as part of ESA’s Living Planet Programme, the third Earth Explorer Core Mission, EarthCARE, with the ojective of improving the understanding of the processes involving clouds, aerosols and radiation in the Earth’s atmosphere. EarthCARE payload consists of two active and two passive instruments: an ATmospheric LIDar (ATLID), a Cloud Profiling Radar (CPR), a Multi-Spectral Imager (MSI) and a Broad-Band Radiometer (BBR). The four instruments data are processed individually and in a synergetic manner to produce a large range of products, which include vertical profiles of aerosols, liquid water and ice, observations of cloud distribution and vertical motion within clouds, and will allow the retrieval of profiles of atmospheric radiative heating and cooling. MSI is a compact instrument with a 150 km swath providing 500 m pixel data in seven channels, whose retrieved data will give context to the active instrument measurements, as well as providing cloud and aerosol information. BBR measures reflected solar and emitted thermal radiation from the scene. Operating in the UV range at 355 nm, ATLID provides atmospheric echoes from ground to an altitude of 40 km. Thanks to a high spectral resolution filtering, the lidar is able to separate the relative contribution of aerosol and molecular scattering, which gives access to aerosol optical depth. Co-polarised and cross-polarised components of the Mie scattering contribution are measured on dedicated channels. This paper will provide a description of the optical payload implementation, the design and characterisation of the instruments.

Atlid, ESA atmospheric lidar: manufacture and test results of instrument units

After the successful closure of the Critical Design Review (CDR), the development of the ESA (European Space Agency) ATmospheric LIDAR (Light Detection and Ranging) is now approaching the completion of the manufacturing and testing of all its units and the start of the full instrument integration and qualification campaign.

Lidar instruments for ESA Earth observation missions

The idea of deploying a lidar system on an Earthorbiting satellite stems from the need for continuously providing profiles of our atmospheric structure with high accuracy and resolution and global coverage. Interest in this information for climatology, meteorology and the atmospheric sciences in general is huge. Areas of application range from the determination of global warming and greenhouse effects, to monitoring the transport and accumulation of pollutants in the different atmospheric regions (such as the recent fires in Southeast Asia), to the assessment of the largely unknown microphysical properties and the structural dynamics of the atmosphere itself. Spaceborne lidar systems have been the subject of extensive investigations by the European Space Agency since mid 1970’s, resulting in mission and instrument concepts, such as ATLID, the cloud backscatter lidar payload of the EarthCARE mission, ALADIN, the Doppler wind lidar of the Atmospheric Dynamics Mission (ADM) and more recently a water vapour Differential Absorption Lidar considered for the WALES mission. These studies have shown the basic scientific and technical feasibility of spaceborne lidars, but they have also demonstrated their complexity from the instrument viewpoint. As a result, the Agency undertook technology development in order to strengthen the instrument maturity. This is the case for ATLID, which benefited from a decade of technology development and supporting studies and is now studied in the frame of the EarthCARE mission. ALADIN, a Direct Detection Doppler Wind Lidar operating in the Ultra -Violet, will be the 1st European lidar to fly in 2007 as payload of the Earth Explorer Core Mission ADM. WALES currently studied at the level of a phase A, is based upon a lidar operating at 4 wavelengths in near infrared and aims to profile the water vapour in the lower part of the atmosphere with high accuracy and low bias. Lastly, the European Space Agency is extending the lidar instrument field for Earth Observation by initiating feasibility studies of a spaceborne concept to monitor atmospheric CO2 and other greenhouse gases. The purpose of this paper is to present the instruments concept and related technology/instrument developments that are currently running at the European Space Agency. The paper will also outline the development planning proposed for future lidar systems.