Arnaud Magrez

Are Carbon Nanotube Effects on Green Algae Caused by Shading and Agglomeration

Due to growing production, carbon nanotubes (CNT) may soon be found in a broad range of products and thus in the environment. In this work, an algal growth test was developed to determine effects of pristine and oxidized CNT on the green algae Chlorella vulgaris and Pseudokirchneriella subcapitata. CNT suspensions were prepared in algal test medium and characterized taking into account the suspension age, the reduced light transmittance of nanoparticle suspensions defined as shading of CNT and quantified by UV/vis spectroscopy, and the agglomeration of the CNT and of the algal cells. Growth inhibition and photosynthetic activity were investigated as end points. Growth of C. vulgaris was inhibited with effect concentrations of 50% (EC(50)) values of 1.8 mg CNT/L and of 24 mg CNT/L in well dispersed and in agglomerated suspensions, respectively, and 20 mg CNT/L and 36 mg CNT/L for P. subcapitata, respectively. However, the photosynthetic activity was not affected. Growth inhibition was highly correlated with the shading of CNT and the agglomeration of algal cells. This suggests that the reduced algal growth might be caused mainly by indirect effects, i.e. by reduced availability of light and different growth conditions caused by the locally elevated algal concentration inside of CNT agglomerates.

In vitro investigation of the cellular toxicity of boron nitride nanotubes.

Nanotubes present one of the most promising opportunities in nanotechnology with a plethora of applications in nanoelectronics, mechanical engineering, as well as in biomedical technology. Due to their structure and some physical properties, boron nitride (BN) nanotubes (BNNTs) possess several advantages over carbon nanotubes (CNTs), and they are now commercially produced and used on a large scale. The human and environmental exposure to BN nanomaterials is expected to increase in the near future, and their biological responses need to be examined. Using complementary assays, we have extensively investigated the effects of BNNTs on the viability and metabolic status of different cell types: on the one hand, the effects on cells present in the lung alveoli, and on the other hand, on human embryonic kidney (HEK) cells. Our results indicate that BNNTs are cytotoxic for all cell types studied and, in most cases, are more cytotoxic than CNTs in their pristine (p-CNT) and functionalized (f-CNT) form. However, the level of toxicity and the prominent morphological alterations in the cell populations withstanding BNNT exposure are cell-type-dependent. For instance, BNNTs induced extensive multinucleated giant cell formation in macrophages and increased levels of eosinophilia in fibroblasts. Finally, our results point the toxicity of tubular nanomaterials to be strongly correlated with the cellular accumulation enhanced for straight nanotubes.

High-efficiency solid-state dye-sensitized solar cells: fast charge extraction through self-assembled 3D fibrous network of crystalline TiO2 nanowires.

Herein, we present a novel morphology for solid-state dye-sensitized solar cells based on the simple and straightforward self-assembly of nanorods into a 3D fibrous network of fused single-crystalline anatase nanowires. This architecture offers a high roughness factor, significant light scattering, and up to several orders of magnitude faster electron transport to reach a near-record-breaking conversion efficiency of 4.9%.

Tunable Polaronic Conduction in Anatase TiO2

Oxygen vacancies created in anatase TiO(2) by UV photons (80-130 eV) provide an effective electron-doping mechanism and induce a hitherto unobserved dispersive metallic state. Angle resolved photoemission reveals that the quasiparticles are large polarons. These results indicate that anatase can be tuned from an insulator to a polaron gas to a weakly correlated metal as a function of doping and clarify the nature of conductivity in this material.

Microengineered CH3NH3PbI3 Nanowire/Graphene Phototransistor for Low‐Intensity Light Detection at Room Temperature

The first hybrid phototransistors are reported where the performance of a network of photoactive CH3NH3PbI3 nanowires is enhanced by CVD-grown monolayer graphene. These devices show responsivities as high as ≈2.6 × 106 A W-1 in the visible range, showing potential as room-temperature single-electron detectors.

Catalytic CVD Synthesis of Carbon Nanotubes: Towards High Yield and Low Temperature Growth

The catalytic chemical vapor deposition (CCVD) is currently the most flexible and economically attractive method for the growth of carbon nanotubes. Although its principle is simple, the precisely controlled growth of carbon nanotubes remains very complex because many different parameters influence the growth process. In this article, we review our recent results obtained on the synthesis of carbon nanotubes via CCVD. We discuss the role of the catalyst and the catalyst support. Our recent results obtained from the water assisted growth and the equimolar C2H2-CO2 reaction are also discussed. Both procedures lead to significantly enhanced carbon nanotube growth. In particular, the latter allows growing carbon nanotubes on diverse substrate materials at low temperatures.

Lithium niobate nanowires synthesis, optical properties, and manipulation

Free-standing lithium niobate nanowires (LiNbO_3) are synthesized by the hydrothermal route. The polarization response of the second harmonic generation (SHG) signal is measured in a single nanowire and used to identify the crystal orientation by matching with bulk LiNbO_3 nonlinear optical susceptibility. The electrical manipulation of a LiNbO_3 nanowire and its monitoring through the SHG signal in a fluidic setup are demonstrated.

Cellular Toxicity of TiO2-Based Nanofilaments

At present, nanofilaments are not exclusively based on carbon atoms but can be produced from many inorganic materials in the form of nanotubes and nanowires. It is essential to systematically assess the acute toxicity of these newly synthesized materials since it cannot be predicted from the known toxicity of the same material in another form. Here, the cellular toxicity of TiO2-based nanofilaments was studied in relation to their morphology and surface chemistry. These structures produced by hydrothermal treatment were titanate nanotubes and nanowires with a Na(x)TiO(2+delta) composition. The cytotoxic effect was mainly evaluated by MTT assays combined with direct cell counting and cytopathological analyses of the lung tumor cells. Our work clearly demonstrated that the presence of Na(x)TiO(2+delta) nanofilaments had a strong dose-dependent effect on cell proliferation and cell death. Nanofilament internalization and alterations in cell morphology were observed. Acid treatment performed to substitute Na(+) with H(+) in the Na(x)TiO(2+delta) nanofilaments strongly enhanced the cytotoxic action. This effect was attributed to structural imperfections, which are left by the atom diffusion during the substitution. On the basis of our findings, we conclude that TiO2-based nanofilaments are cytotoxic and thus precautions should be taken during their manipulation.

Controlled positioning of carbon nanotubes by dielectrophoresis: Insights into the solvent and substrate role

We demonstrate the ability to precisely control the deposition of a defined number of carbon nanotubes (CNTs) from solution onto microfabricated electrodes using dielectrophoresis. The solvation shell around the CNTs, exhibiting a high dielectric constant which is possibly larger than the intrinsic dielectric constant of CNTs, is found to play a crucial role in electrophoretic processes. Substrate resistivity is also very important: The spatial repartition of the electric field between the substrate and the microelectrodes leads to deviations from the precise location of the CNTs. A recipe is given for the dielectrophoresis of CNTs which can be extended to other nanowires or nanotubes.

Diuron sorbed to carbon nanotubes exhibits enhanced toxicity to Chlorella vulgaris.

Carbon nanotubes (CNT) are more and more likely to be present in the environment, where they will associate with organic micropollutants due to strong sorption. The toxic effects of these CNT-micropollutant mixtures on aquatic organisms are poorly characterized. Here, we systematically quantified the effects of the herbicide diuron on the photosynthetic activity of the green alga Chlorella vulgaris in presence of different multiwalled CNT (industrial, purified, pristine, and oxidized) or soot. The presence of carbonaceous nanoparticles reduced the adverse effect of diuron maximally by <78% (industrial CNT) and <34% (soot) at 10.0 mg CNT/L, 5.0 mg soot/L, and diuron concentrations in the range 0.73-2990 μg/L. However, taking into account the measured dissolved instead of the nominal diuron concentration, the toxic effect of diuron was equal to or stronger in the presence of CNT by a factor of up to 5. Sorbed diuron consequently remained partially bioavailable. The most pronounced increase in toxicity occurred after a 24 h exposure of algae and CNT. All results point to locally elevated exposure concentration (LEEC) in the proximity of algal cells associated with CNT as the cause for the increase in diuron toxicity.