Arne Kordts

Photonic Damascene process for integrated high-Q microresonator based nonlinear photonics

High confinement, integrated silicon nitride (SiN) waveguides have recently emerged as an attractive platform for on-chip nonlinear optical devices. The fabrication of high-Q SiN microresonators with anomalous group velocity dispersion has enabled broadband nonlinear optical frequency comb generation. Such frequency combs have been successfully applied in coherent communication and ultrashort pulse generation. However, the reliable fabrication of high confinement waveguides from stoichiometric, high stress SiN remains challenging. Here we present a novel photonic Damascene fabrication process enabling the use of substrate topography for stress control and thin film crack prevention. With close to unity sample yield we fabricate microresonators with 1.35 mu m thick waveguides and optical Q-factors of 3.7 x 10(6) and demonstrate single temporal dissipative Kerr soliton based coherent optical frequency comb generation. Our newly developed process is also interesting for other material platforms, photonic integration, and mid-infrared Kerr comb generation

Microresonator-based solitons for massively parallel coherent optical communications

Solitons are waveforms that preserve their shape while propagating, as a result of a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s and showed promise as a way of overcoming the limitations imposed by dispersion of optical fibres. However, these approaches were later abandoned in favour of wavelength-division multiplexing schemes, which are easier to implement and offer improved scalability to higher data rates. Here we show that solitons could make a comeback in optical communications, not as a competitor but as a key element of massively parallel wavelength-division multiplexing. Instead of encoding data on the soliton pulse train itself, we use continuous-wave tones of the associated frequency comb as carriers for communication. Dissipative Kerr solitons (DKSs) (solitons that rely on a double balance of parametric gain and cavity loss, as well as dispersion and nonlinearity) are generated as continuously circulating pulses in an integrated silicon nitride microresonator via four-photon interactions mediated by the Kerr nonlinearity, leading to low-noise, spectrally smooth, broadband optical frequency combs. We use two interleaved DKS frequency combs to transmit a data stream of more than 50 terabits per second on 179 individual optical carriers that span the entire telecommunication C and L bands (centred around infrared telecommunication wavelengths of 1.55 micrometres). We also demonstrate coherent detection of a wavelength-division multiplexing data stream by using a pair of DKS frequency combs—one as a multi-wavelength light source at the transmitter and the other as the corresponding local oscillator at the receiver. This approach exploits the scalability of microresonator-based DKS frequency comb sources for massively parallel optical communications at both the transmitter and the receiver. Our results demonstrate the potential of these sources to replace the arrays of continuous-wave lasers that are currently used in high-speed communications. In combination with advanced spatial multiplexing schemes and highly integrated silicon photonic circuits, DKS frequency combs could bring chip-scale petabit-per-second transceivers into reach.

Raman Self-Frequency Shift of Dissipative Kerr Solitons in an Optical Microresonator.

The formation of temporal dissipative solitons in continuous wave laser driven microresonators enables the generation of coherent, broadband and spectrally smooth optical frequency combs as well as femtosecond pulses with compact form factor. Here we report for the first time on the observation of a Raman-induced soliton self-frequency shift for a microresonator soliton. The Raman effect manifests itself in amorphous SiN microresonator based single soliton states by a spectrum that is hyperbolic secant in shape, but whose center is spectrally red-shifted (i.e. offset) from the continuous wave pump laser. The shift is theoretically described by the first order shock term of the material’s Raman response, and we infer a Raman shock time of 20 fs for amorphous SiN. Moreover, we observe that the Raman induced frequency shift can lead to a cancellation or overcompensation of the soliton recoil caused by the formation of a (coherent) dispersive wave. The observations are in excellent agreement with numerical simulations based on the Lugiato-Lefever equation (LLE) with a Raman shock term. Our results contribute to the understanding of Kerr frequency combs in the soliton regime, enable to substantially improve the accuracy of modeling and are relevant to the fundamental timing jitter of microresonator solitons.We experimentally observed the Raman-induced self-frequency shift of high-intensity dissipative Kerr solitons in high-Q silicon nitride microresonators. The Raman redshift is linearly dependent on the pump-frequency-detuning, associated with the tunability of the soliton pulse duration.

Universal dynamics and deterministic switching of dissipative Kerr solitons in optical microresonators

We discover a novel mechanism allowing for successive reduction of the number of dissipative Kerr solitons in optical microresonators. It is demonstrated that multiple and single soliton state can be deterministically accessed.

Higher order mode suppression in high-Q anomalous dispersion SiN microresonators for temporal dissipative Kerr soliton formation.

Frequency comb generation based on dissipative Kerr solitons (DKS) in microresonators is important for many applications. We show higher order mode suppression in silicon nitride microresonators, that reduces avoided modal crossing to enable DKS generation.

Ultrafast optical ranging using microresonator soliton frequency combs

Miniaturized optical ranging and tracking Light detection and ranging systems are used in many engineering and environmental sensing applications. Their relatively large size and cost, however, tend to be prohibitive for general use in autonomous vehicles and drones. Suh and Vahala and Trocha et al. show that optical frequency combs generated by microresonator devices can be used for precision ranging and the tracking of fast-moving objects. The compact size of the microresonators could broaden the scope for widespread applications, providing a platform for miniaturized laser ranging systems suitable for photonic integration. Science, this issue p. 884, p. 887 Optical microresonators can be used for light detection and ranging as well as tracking fast-moving objects. Light detection and ranging is widely used in science and industry. Over the past decade, optical frequency combs were shown to offer advantages in optical ranging, enabling fast distance acquisition with high accuracy. Driven by emerging high-volume applications such as industrial sensing, drone navigation, or autonomous driving, there is now a growing demand for compact ranging systems. Here, we show that soliton Kerr comb generation in integrated silicon nitride microresonators provides a route to high-performance chip-scale ranging systems. We demonstrate dual-comb distance measurements with Allan deviations down to 12 nanometers at averaging times of 13 microseconds along with ultrafast ranging at acquisition rates of 100 megahertz, allowing for in-flight sampling of gun projectiles moving at 150 meters per second. Combining integrated soliton-comb ranging systems with chip-scale nanophotonic phased arrays could enable compact ultrafast ranging systems for emerging mass applications.

Universal dynamics and controlled switching of dissipative Kerr solitons in optical microresonators

We discover a novel mechanism allowing for successive reduction of the number of dissipative Kerr solitons in optical microresonators. It is demonstrated that multiple and single soliton state can be deterministically accessed.

Demonstration of optical multicasting using Kerr frequency comb lines

We experimentally demonstrate optical multicasting using Kerr frequency combs generated from a Si3N4 microresonator. We obtain Kerr combs in two states with different noise properties by varying the pump wavelength in the resonator and investigate the effect of Kerr combs on multicasting. Seven-fold multicasting of 20 Gbaud quadrature phase-shift-keyed signals and four-fold multicasting of 16-quadrature amplitude modulation signals have been achieved when low-phase-noise combs are input into a periodically poled lithium niobate waveguide. In addition, we find that the wavelength conversion efficiency in the PPLN waveguide for chaotic combs with high noise is similar to that for low-noise combs, while the signal quality of the multicast copy is significantly degraded.

Frequency-comb-assisted broadband precision spectroscopy with cascaded diode lasers.

Frequency-comb-assisted diode laser spectroscopy, employing both the accuracy of an optical frequency comb and the broad wavelength tuning range of a tunable diode laser, has been widely used in many applications. In this Letter, we present a novel method using cascaded frequency agile diode lasers, which allows us to extend the measurement bandwidth to 37.4 THz (1355-1630 nm) at megahertz resolution with scanning speeds above 1 THz/s. It is demonstrated as a useful tool to characterize a broadband spectrum for molecular spectroscopy, and in particular it enables us to characterize the dispersion of integrated microresonators up to the 4th-order.

Dependence of a microresonator Kerr frequency comb on the pump linewidth

We experimentally investigate the dependence of Kerr comb generation, comb linewidth, and coherent system performance on the pump linewidth in a microresonator. We find that the generation of the primary comb can have a larger tolerance to the pump linewidth compared with that of the low-phase-noise comb. In addition, the linewidths of the generated combs are almost linearly dependent on the pump linewidth in the primary and low-phase-noise states. Furthermore, the optical signal-to-noise ratio penalty between the pump and generated Kerr combs in a coherent communication system is less than 0.2 dB in both the primary and low-phase-noise states, showing that Kerr frequency combs in these two states can have similar coherent system performance to the pump.