Arto Puurula

Assessment of the Strengthening of an RC Railway Bridge with CFRP Utilizing a Full-Scale Failure Test and Finite-Element Analysis

A finite element (FE) model was calibrated using the data obtained from a full-scale test to failure of a 50 year old reinforced concrete (RC) railway bridge. The model was then used to assess the ...

Loading to failure and 3D nonlinear FE modelling of a strengthened RC bridge

A reinforced concrete railway trough bridge in Örnsköldsvik, Sweden, was strengthened in bending with rods of carbon-fibre-reinforced polymer and loaded to failure. The aim was to test and calibrate methods developed in the European Research Project ‘Sustainable Bridges’ regarding assessment and strengthening of existing bridges. A steel beam was placed in the middle of one of the two spans and was pulled downwards. Failure was reached at an applied load of 11.7 MN. It was initiated by a bond failure caused by a combined action of shear, torsion as well as bending after yielding in the longitudinal steel reinforcement and the stirrups. The bond failure led to a redistribution of the internal forces from the tensile reinforcement to the stirrups, causing the final failure. The computer models developed to simulate the loading process were improved step by step from linear shell models to more detailed models. The most developed model, a three-dimensional nonlinear finite element model with discrete reinforcement, gave accurate accounts of the response of the bridge.

Tested versus code capacity of existing bridges : Three examples

This paper presents the results from three tests to failure of different types of bridges: a two span reinforced concrete railway trough bridge; a five-span prestessed concrete beam bridge; and a o ...