Aruliah Rajasekar

Characterization of corrosive bacterial consortia isolated from petroleum-product-transporting pipelines

Microbiologically influenced corrosion is a problem commonly encountered in facilities in the oil and gas industries. The present study describes bacterial enumeration and identification in diesel and naphtha pipelines located in the northwest and southwest region in India, using traditional cultivation technique and 16S rDNA gene sequencing. Phylogenetic analysis of 16S rRNA sequences of the isolates was carried out, and the samples obtained from the diesel and naphtha-transporting pipelines showed the occurrence of 11 bacterial species namely Serratia marcescens ACE2, Bacillus subtilis AR12, Bacillus cereus ACE4, Pseudomonas aeruginosa AI1, Klebsiella oxytoca ACP, Pseudomonas stutzeri AP2, Bacillus litoralis AN1, Bacillus sp., Bacillus pumilus AR2, Bacillus carboniphilus AR3, and Bacillus megaterium AR4. Sulfate-reducing bacteria were not detected in samples from both pipelines. The dominant bacterial species identified in the petroleum pipeline samples were B. cereus and S. marcescens in the diesel and naphtha pipelines, respectively. Therefore, several types of bacteria may be involved in biocorrosion arising from natural biofilms that develop in industrial facilities. In addition, localized (pitting) corrosion of the pipeline steel in the presence of the consortia was observed by scanning electron microscopy analysis. The potential role of each species in biofilm formation and steel corrosion is discussed.

Bacteria attachment to surfaces – AFM force spectroscopy and physicochemical analyses

Understanding bacterial adhesion to surfaces requires knowledge of the forces that govern bacterial-surface interactions. Biofilm formation on stainless steel 316 (SS316) by three bacterial species was investigated by examining surface force interaction between the cells and metal surface using atomic force microscopy (AFM). Bacterial-metal adhesion force was quantified at different surface delay time from 0 to 60s using AFM tip coated with three different bacterial species: Gram-negative Massilia timonae and Pseudomonas aeruginosa, and Gram-positive Bacillus subtilis. The results revealed that bacterial adhesion forces on SS316 surface by Gram-negative bacteria is higher (8.53±1.40 nN and 7.88±0.94 nN) when compared to Gram-positive bacteria (1.44±0.21 nN). Physicochemical analysis on bacterial surface properties also revealed that M. timonae and P. aeruginosa showed higher hydrophobicity and surface charges than B. subtilis along with the capability of producing extracellular polymeric substances (EPS). The higher hydrophobicity, surface charges, and greater propensity to form EPS by M. timonae and P. aeruginosa led to high adhesive force on the metal surface.

Role of Serratia marcescens ACE2 on diesel degradation and its influence on corrosion.

A facultative anaerobic species Serratia marcescens ACE2 isolated from the corrosion products of diesel transporting pipeline in North West, India was identified by 16S rDNA sequence analysis. The role of Serratia marcesens ACE2 on biodegradation of diesel and its influence on the corrosion of API 5LX steel has been elucidated. The degrading strain ACE2 is involved in the process of corrosion of steel API 5LX and also utilizes the diesel as an organic source. The quantitative biodegradation efficiency (BE) of diesel was 58%, calculated by gas-chromatography–mass spectrum analysis. On the basis of gas-chromatography–mass spectrum (GC–MS), Fourier Transform infrared spectroscopy (FTIR) and X-ray diffractometer (XRD), the involvement of Serratia marcescens on degradation and corrosion has been investigated. This basic study will be useful for the development of new approaches for detection, monitoring and control of microbial corrosion.

Biosurfactant and Degradative Enzymes Mediated Crude Oil Degradation by Bacterium Bacillus subtilis A1

In this work, the biodegradation of the crude oil by the potential biosurfactant producing Bacillus subtilis A1 was investigated. The isolate had the ability to synthesize degradative enzymes such as alkane hydroxylase and alcohol dehydrogenase at the time of biodegradation of hydrocarbon. The biosurfactant producing conditions were optimized as pH 7.0, temperature 40°C, 2% sucrose and 3% of yeast extract as best carbon and nitrogen sources for maximum production of biosurfactant (4.85 g l-1). Specifically, the low molecular weight compounds, i.e., C10–C14 were completely degraded, while C15–C19 were degraded up to 97% from the total hydrocarbon pools. Overall crude oil degradation efficiency of the strain A1 was about 87% within a short period of time (7 days). The accumulated biosurfactant from the biodegradation medium was characterized to be lipopeptide in nature. The strain A1 was found to be more robust than other reported biosurfactant producing bacteria in degradation efficiency of crude oil due to their enzyme production capability and therefore can be used to remove the hydrocarbon pollutants from contaminated environment.

Bio-Oxidation and Biocyanidation of Refractory Mineral Ores for Gold Extraction: A Review

Bioleaching has emerged as a green technology with promising applications in mining industries in the context of recovery of precious metals from mineral ores. The authors synthesize the current knowledge available in the bioleaching of gold (Au) from ores by bringing together historical developments and recent endeavors. In addition, the role of the microbial community in the bio-oxidation of refractory ores for removal of base metal impurities and in the recovery of Au based on biocyanidation is reviewed. They also address the future research directions in the bioleaching of Au in order to make further advances toward practical industrial applications.

Bacterial degradation of petroleum hydrocarbons

The petroleum refining industry is one of the largest manufacturing industries in the world. After Western Europe and the USA, Latin America has the highest petroleum refining capacity in the world. Huge investments are made each year on capital equipment, their modernization and maintenance, including prevention and treatment of microbial contamination.

Iron and iron oxide nanoparticles are highly toxic to Culex quinquefasciatus with little non-target effects on larvivorous fishes

The control of filariasis vectors has been enhanced in several areas, but there are main challenges, including increasing resistance to insecticides and lack of cheap and eco-friendly products. The toxicity of iron (Fe0) and iron oxide (Fe2O3) nanoparticles has been scarcely investigated yet. We studied the larvicidal and pupicidal activity of Fe0 and Fe2O3 nanoparticles against Culex quinquefasciatus. Fe0 and Fe2O3 nanoparticles produced by green (using a Ficus natalensis aqueous extract) and chemical nanosynthesis, respectively, were analyzed by UV–Vis spectrophotometry, FT-IR spectroscopy, XRD analysis, SEM, and EDX assays. In larvicidal and pupicidal experiments on Cx. quinquefasciatus, LC50 of Fe0 nanoparticles ranged from 20.9 (I instar larvae) to 43.7 ppm (pupae) and from 4.5 (I) to 22.1 ppm (pupae) for Fe2O3 nanoparticles synthesized chemically. Furthermore, the predation efficiency of the guppy fish, Poecilia reticulata, after a single treatment with sub-lethal doses of Fe0 and Fe2O3 nanoparticles was magnified. Overall, this work provides new insights about the toxicity of Fe0 and Fe2O3 nanoparticles against mosquito vectors; we suggested that green and chemical fabricated nano-iron may be considered to develop novel and effective pesticides.

Biodegradation of Petroleum Hydrocarbon and Its Influence on Corrosion with Special Reference to Petroleum Industry

Crude oils vary in their physical properties, chemical composition and between fields of origin; of special importance are the relative amounts of high and low molecular weight compounds present in crude oils. Heavy oils contain a greater percentage of high molecular weight components. The low biodegradation rates of heavy oils probably reflect the resistance of the complex high molecular weight components to microbial degradation. Hydrocarbons are water insoluble substrates that often need to be emulsified prior to their degradation by microbes. Emulsification is an important phenomenon among those parameters which influence the fate of crude oil. It has been accepted that the microorganisms developing on hydrocarbons produce surface-active agents, or biosurfactants, which emulsify the substrate, enabling its transfer into cells. Biodegraded hydrocarbons can provide bio-corrosive microbial communities with an important source of nutrients. Hence, occurrence of some hydrocarbon-degrading bacteria in oil reservoir/petroleum transporting pipelines influence electrochemical corrosion reactions. These isolates able to cause corrosion of carbon steel. Microbiologically influenced corrosion is a problem commonly encountered in facilities of the oil and gas industries. New insights into microbial corrosion processes may be achieved through understanding of the interaction between biodegradation and corrosion of carbon steel in crude oil reservoir/transporting pipelines. In this chapter, the interaction between hydrocarbon-degrading bacteria on corrosion of carbon steel are elucidated. The role of biodegradation on corrosion was confirmed by gas chromatography–mass spectrometry, X-ray diffraction, electrochemical impedance spectroscopy and weight loss analyses. The potential of this consortium was evaluated for the bioremediation of oil-contaminated environments.

Biosurfactants produced by Bacillus subtilis A1 and Pseudomonas stutzeri NA3 reduce longevity and fecundity of Anopheles stephensi and show high toxicity against young instars

Anopheles stephensi acts as vector of Plasmodium parasites, which are responsible for malaria in tropical and subtropical areas worldwide. Currently, malaria management is a big challenge due to the presence of insecticide-resistant strains as well as to the development of Plasmodium species highly resistant to major antimalarial drugs. Therefore, the present study focused on biosurfactant produced by two bacteria Bacillus subtilis A1 and Pseudomonas stutzeri NA3, evaluating them for insecticidal applications against malaria mosquitoes. The produced biosurfactants were characterized using FT-IR spectroscopy and gas chromatography-mass spectrometry (GC-MS), which confirmed that biosurfactants had a lipopeptidic nature. Both biosurfactants were tested against larvae and pupae of A. stephensi. LC50 values were 3.58 (larva I), 4.92 (II), 5.73 (III), 7.10 (IV), and 7.99 (pupae) and 2.61 (I), 3.68 (II), 4.48 (III), 5.55 (IV), and 6.99 (pupa) for biosurfactants produced by B. subtilis A1 and P. stutzeri NA3, respectively. Treatments with bacterial surfactants led to various physiological changes including longer pupal duration, shorter adult oviposition period, and reduced longevity and fecundity. To the best of our knowledge, there are really limited reports on the mosquitocidal and physiological effects due to biosurfactant produced by bacterial strains. Overall, the toxic activity of these biosurfactant on all young instars of A. stephensi, as well as their major impact on adult longevity and fecundity, allows their further consideration for the development of insecticides in the fight against malaria mosquitoes.