Ashraf A. Hamed

Developing the Potential Ophthalmic Applications of Pilocarpine Entrapped Into Polyvinylpyrrolidone–Poly(acrylic acid) Nanogel Dispersions Prepared By γ Radiation

The aim of this study was to improve the stability and bioavailability of pilocarpine in order to maintain an adequate concentration of the pilocarpine at the site of action for prolonged period of time. Thus, pH-sensitive polyvinylpyrrolidone-poly(acrylic acid) (PVP/PAAc) nanogels prepared by γ radiation-induced polymerization of acrylic acid (AAc) in an aqueous solution of polyvinylpyrrolidone (PVP) as a template polymer were used to encapsulate pilocarpine. Factors affecting size and encapsulation efficiency were optimized to obtain nanogel suitable for entrapping drug efficiently. The PVP/PAAc nanogel particles were characterized by dynamic light scattering (DLS), zeta potential, Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM), and their size can be controlled by the feed composition and concentration as well as the irradiation dose. Pilocarpine was loaded into the nanogel particles through electrostatic interactions where the AAc-rich nanogels exhibited the highest loading efficiency. The transmittance, mucoadhesion, and rheological characteristics of the nanogel particles were studied to evaluate their ocular applicability. The in vitro release study conducted in simulated tear fluid showed a relatively long sustained release of pilocarpine from the prepared PVP/PAAc nanogel particles if compared with pilocarpine in solution.

The Use of 4-(3,4-Dichlorophenyl)-4-Oxo-2-(4-Antipyrinyl)- Butanoic Acid in the Preparation of Some New Heterocyclic Compounds With Expected Biological Activity

Reaction of 4-oxo-4-(3,4-dichlorophenyl)-2-butenoic acid (1) with antipyrin (2) gave the corresponding butanoic acid 3. Reaction of 3 with hydrazines gave the pyridazinone derivatives 5a,b. Compounds 5a,b were used to prepare the corresponding dithio derivatives. Reaction of 5a with POCl3 unexpectedly gave the chloropyridazine derivative 7, which is used to prepare the corresponding thio derivative. The hitherto unknown reactions of this chloro derivative with 2-amino-3-carbethoxy-4,5-dimethylthiophene and 2-amino-3-carbethoxy tetrahydrobenzothiophene have now been described. The behaviour of the chloro derivative toward hydrazine hydrate, sodium azide and anthranilic acid was also studied. Some of the new compounds showed antimicrobial and antifungal activities.

Developing a biomaterial interface based on poly(lactic acid) via plasma-assisted covalent anchorage of d-glucosamine and its potential for tissue regeneration.

The aim of this study was to develop the potential tissue engineering applications of d-glucosamine (GlcN) immobilized onto the surface of a biodegradable matrix in order to induce a desired biological effect at biointerfaces. Thus, for sample preparation we used a novel multistep physicochemical approach. In the first step the poly(lactic acid) (PLA) films were exposed to a low pressure plasma in air atmosphere, followed by radical graft copolymerization with acrylic acid to yield a carboxyl-functionalized spacer layer on the PLA surface. The carboxyl groups were then coupled to GlcN molecules via the carbodiimide chemistry. The developed surfaces were characterized by X-ray Photoelectron Spectroscopy (XPS), Contact angle measurements and Atomic Force Microscopy (AFM). A preliminary study on the proliferation of fibroblasts on the developed surfaces was performed using the NIH/3T3 cell line.

Description of d-glucosamine immobilization kinetics onto poly(lactic acid) surface via a multistep physicochemical approach for preparation of novel active biomaterials

Poly(lactic acid) (PLA) has shown much success in the preparation of tissue engineering scaffolds as it can be fabricated with a tailored architecture. However, the PLA surface has drawbacks including the lack of biofunctional motifs which are essential for high affinity to biological cells. Therefore, this study describes a multistep physicochemical approach for the immobilization of d-glucosamine (GlcN), a naturally occurring monosaccharide having many biological functions, on the PLA surface aiming at enhancing the cell proliferation activity. In this approach, poly(acrylic acid) (PAAc) spacer arms are first introduced into the PLA surface via plasma post-irradiation grafting technique. Then, covalent coupling or physical adsorption of GlcN with/on the PAAc spacer is carried out. Factors affecting the grafting yield are controlled to produce a suitable spacer for bioimmobilization. X-ray photon spectroscopic (XPS) analyses confirm the immobilization of GlcN on the PLA surface. The XPS results reveal also that increasing the yield of grafted PAAc spacer on the PLA surface increases the amount of covalently immobilized GlcN, but actually inhibits the immobilization process using the physical adsorption method. Contact angle measurements and atomic force microscopy (AFM) show a substantial increase of surface energy and roughness of PLA surface, respectively, upon the multistep modification procedure. The cytocompatibility of the modified surfaces is assessed using a mouse embryonic fibroblast (MEF) cell line. Observation from the cell culture basically demonstrates the potential of GlcN immobilization in improving the cytocompatibility of the PLA surface. Moreover, the covalent immobilization of GlcN seems to produce more cytocompatible surfaces if compared with the physical adsorption method.