Asif Rahman

Effect of coagulant/flocculants on bioproducts from microalgae

The potential of microalgae as a source of sustainable energy, nutritional supplements and specialized chemicals necessitates a thorough evaluation of the methods of harvesting microalgae with regards to the bioproduct(s) desired. This research assessed the effect of coagulation, flocculation, and centrifugation on the wet lipid extraction procedure, which fractionated microalgae into hydrolyzed biomass for fermentation into acetone, butanol, and ethanol, an aqueous phase as growth media for genetically engineered Escherichia coli, and a lipid fraction for the production of biodiesel. Biomass harvested by cationic starches, alum, and centrifugation produced 30, 19, and 22.5mg/g of dry wt. algae of total combined acetone, butanol, and ethanol, respectively. Higher biodiesel production was also observed for the cationic starches (9.6 mg/g of dry wt. algae) than alum (0.6 mg/g of dry wt. algae) harvested biomass. The results suggested significant effect of the harvesting methods on the yields of bioproducts.

Effects of wastewater microalgae harvesting methods on polyhydroxybutyrate production.

Microalgae have gained considerable attention recently as a sustainable means to produce biofuels and bioproducts. It has previously been demonstrated that single strain microalgae can be harvested and processed through a wet lipid extraction procedure (WLEP). After WLEP processing, acetone, butanol, ethanol, and biodiesel can be produced, and growth of recombinant Escherichia coli can be achieved from the microalgae. This study demonstrates the application of different wastewater microalgae harvesting techniques and processing through WLEP on the production of polyhydroxybutyrate (PHB) by E. coli. The harvesting techniques include: cationic potato starch (CPS), cationic corn starch (CCS), aluminum sulfate, and centrifugation. The microalgae-based media were used to grow E. coli to ∼10(13)CFU/mL and produce approximately 7.8% of dry cell weight as PHB. This study demonstrates the feasibility of harvesting wastewater algae to produce PHB and the potential for bioproduct generation.

Polyhydroxyalkanoate quantification in organic wastes and pure cultures using a single-step extraction and 1H NMR analysis

In this study, a proton nuclear magnetic resonance (1H NMR) method was developed to quantitatively analyze polyhydroxyalkanoate (PHA) content in Cupriavidus necator H16, Azotobacter vinelandii AvOP, and mixed microbial cultures from the effluent of an agricultural waste treatment anaerobic digester. In contrast to previous methods, a single-step PHA extractive method using deuterated chloroform was established, thereby facilitating direct 1H NMR analysis. The accuracy of the method was verified through comparison with well-established gas chromatography (GC) methanolysis techniques. Nile blue fluorescence staining was also carried out to serve as an independent and qualitative indicator of intracellular PHA content. The results indicate that the 1H NMR method is appropriate for rapid and non-destructive quantification of overall PHA content and determination of PHA copolymer composition in a variety of cultures. Notably, this technique was effective in measuring PHA content in full-strength waste samples where high concentrations of background impurities and organic compounds are present. The straightforward procedures minimize error-introducing steps, require less time and materials, and result in an accurate method suitable for routine analyses.

Food waste conversion to microbial polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are biopolymers with desirable material properties similar to petrochemically derived plastics. PHAs are naturally produced by a wide range of microorganisms as a carbon storage mechanism and can accumulate to significantly high levels. PHAs are an environmentally friendly alternative to their petroleum counterparts because they can be easily degraded, potentially reducing the burden on municipal waste systems. Nevertheless, widespread use of PHAs is not currently realistic due to a variety of factors. One of the major constraints of large‐scale PHA production is the cost of carbon substrate for PHA‐producing microbes. The cost of production could potentially be reduced with the use of waste carbon from food‐related processes. Food wastage is a global issue and therefore harbours immense potential to create valuable bioproducts. This articles main focus is to examine the state of the art of converting food‐derived waste into carbon substrates for microbial metabolism and subsequent conversion into PHAs.

Microalgae as a Source of Bioplastics

As worldwide usage for plastics continues to increase, production will need to keep up with demand. Alternative means of producing bioplastics in large quantities economically with comparable material properties to their petroleum counterparts is important for supporting a sustainable source of plastics moving forward. Microalgal biomass is a potential source for producing bioplastics, both using the biomass directly, as well as using it as a feedstock for secondary processes. Bioplastics produced from microalgae have similar characteristics to petroleum-based plastics and thus can be “dropped in” to existing infrastructure and applications. Furthermore, microalgae-derived bioplastics can also be biodegradable, which also makes them environment-friendly. In this chapter, both direct usage of microalgal biomass and derivatized microalgae biomass for bioplastic production will be discussed.