Asli Ugur

Water‐Assisted Vapor Deposition of PEDOT Thin Film

The synthesis and characterization of poly(3,4-ethylenedioxythiophene) (PEDOT) using water-assisted vapor phase polymerization (VPP) and oxidative chemical vapor deposition (oCVD) are reported. For the VPP PEDOT, the oxidant, FeCl3 , is sublimated onto the substrate from a heated crucible in the reactor chamber and subsequently exposed to 3,4-ethylenedioxythiophene (EDOT) monomer and water vapor in the same reactor. The oCVD PEDOT was produced by introducing the oxidant, EDOT monomer, and water vapor simultaneously to the reactor. The enhancement of doping and crystallinity is observed in the water-assisted oCVD thin films. The high doping level observed at UV-vis-NIR spectra for the oCVD PEDOT, suggests that water acts as a solubilizing agent for oxidant and its byproducts. Although the VPP produced PEDOT thin films are fully amorphous, their conductivities are comparable with that of the oCVD produced ones.

Synthesis of polymer bead nano-necklaces on aligned carbon nanotube scaffolds

Here, we report the fabrication of aligned carbon nanotube (A-CNT)/conducting polymer (CP) heterostructures with both uniform conformal and periodic beaded polymer morphologies via oxidative chemical vapor deposition of poly(ethylenedioxythiophene). Periodic beaded CP morphologies are realized utilizing the Plateau-Rayleigh instability to transform the original uniform conformal film, yielding a beaded CP morphology with a >50% enhancement in specific surface area (SSA). Modeling indicates that this SSA increase originates from the internal volume of the A-CNTs becoming available for adsorption, and that these internal A-CNT surfaces, if they could be made accessible to electrolyte ions, could lead to >30% enhancement of specific gravimetric and volumetric capacitances of current state-of-the-art A-CNT/CP heterostructures.