Attilio Ceccato

Sensitive determination of buprenorphine and its N-dealkylated metabolite norbuprenorphine in human plasma by liquid chromatography coupled to tandem mass spectrometry

A highly sensitive method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed for the quantitative determination of buprenorphine and its active metabolite norbuprenorphine in human plasma. Automated solid phase extraction (SPE) on disposable extraction cartridges (DEC) is used to isolate the compounds from the biological matrix and to prepare a cleaner sample before injection and analysis in the LC-MS/MS system. After conditioning, the plasma sample (1.0 ml) is loaded on the DEC filled with octyl silica (C8) and washed with water. The analytes are, therefore, eluted by dispensing methanol containing 0.1% of acetic acid. The eluate is collected and evaporated to dryness. The residue is dissolved in mobile phase and an aliquot is injected in the LC-MS/MS system. On-line LC-MS/MS system using atmospheric pressure chemical ionization (APCI) has been developed for the determination of buprenorphine and norbuprenorphine. The separation is obtained on a RP-18 stationary phase using a mobile phase consisting in a mixture of methanol and 50 mM ammonium acetate solution (50:50, v/v). Clonazepam is used as internal standard (IS). The MS/MS ion transitions monitored are m/z 468-->468, 414-->414 and 316-->270 for buprenorphine, norbuprenorphine and clonazepam, respectively. The method was validated regarding recovery, linearity, precision and accuracy. The limits of quantification (LOQs) were around 10 pg/ml for buprenorphine and 50 pg/ml for norbuprenorphine.

Application of new methodologies based on design of experiments, independent component analysis and design space for robust optimization in liquid chromatography

HPLC separations of an unknown sample mixture and a pharmaceutical formulation have been optimized using a recently developed chemometric methodology proposed by W. Dewé et al. in 2004 and improved by P. Lebrun et al. in 2008. This methodology is based on experimental designs which are used to model retention times of compounds of interest. Then, the prediction accuracy and the optimal separation robustness, including the uncertainty study, were evaluated. Finally, the design space (ICH Q8(R1) guideline) was computed as the probability for a criterion to lie in a selected range of acceptance. Furthermore, the chromatograms were automatically read. Peak detection and peak matching were carried out with a previously developed methodology using independent component analysis published by B. Debrus et al. in 2009. The present successful applications strengthen the high potential of these methodologies for the automated development of chromatographic methods.

Development and validation of a liquid chromatographic method for the determination of amlodipine residues on manufacturing equipment surfaces

In the pharmaceutical industry, an important step consists in the removal of possible drug residues from the involved equipment and areas. The cleaning procedures must be validated and the methods to determine trace amounts of drugs have therefore to be considered with special attention. A high performance liquid chromatographic method for the determination of amlodipine residues in swab samples was developed and validated in order to control a cleaning procedure. The swabbing procedure was optimized in order to obtain a suitable recovery of amlodipine from stainless steel. A mean recovery close to 90% was obtained when two swabs moistened with methanol were used. The residual amlodipine was chromatographed at 25 degrees C in the isocratic mode on a RP-18 stationary phase using a mobile phase consisting of acetonitrile, methanol and pH 3.0 triethylamine solution (15:35:50 v/v/v). UV detection was performed at 237 nm. The method was shown to be selective and linear into the concentration range varying from 0.39 to 1.56 microg/ml. Accuracy and precision of the method were also studied. The limits of detection and quantitation were evaluated to be 0.02 and 0.08 microg/ml, respectively. The stability of amlodipine at different steps of the sampling procedure and the precision of the swabbing procedure were also investigated.

Quantitative analysis of N-acetylcysteine and its pharmacopeial impurities in a pharmaceutical formulation by liquid chromatography–UV detection–mass spectrometry

A new method for the simultaneous determination of N-acetylcysteine and its pharmacopeial impurities, cysteine, cystine, N,N-diacetylcystine and N,S-diacetylcysteine in an effervescent tablet has been developed. The method is based on on-line LC-UV-MS using a pneumatically-assisted electrospray interface (ionspray). The stability of the thiol moieties of the analytes was ensured by the acidic pH of the LC mobile phase. Quantitation of N-acetylcysteine was performed with UV detection to avoid ion-source overloading effect due to its higher concentration, whereas the impurities could be easily separated and quantified in MS. The method was validated in terms of stability, linearity, precision and accuracy.

A new statistical method for the automated detection of peaks in UV-DAD chromatograms of a sample mixture

One of the major issues within the context of the fully automated development of chromatographic methods consists of the automated detection and identification of peaks coming from complex samples such as multi-component pharmaceutical formulations or stability studies of these formulations. The same problem can also occur with plant materials or biological matrices. This step is thus critical and time-consuming, especially when a Design of Experiments (DOE) approach is used to generate chromatograms. The use of DOE will often maximize the changes of the analytical conditions in order to explore an experimental domain. Unfortunately, this generally provides very different and unpredictable chromatograms which can be difficult to interpret, thus complicating peak detection and peak tracking (i.e. matching peaks among all the chromatograms). In this context, Independent Components Analysis (ICA), a new statistically based signal processing methods was investigated to solve this problem. The ICA principle assumes that the observed signal is the resultant of several phenomena (known as sources) and that all these sources are statistically independent. Under those assumptions, ICA is able to recover the sources which will have a high probability of representing the constitutive components of a chromatogram. In the present study, ICA was successfully applied for the first time to HPLC-UV-DAD chromatograms and it was shown that ICA allows differentiation of noise and artifact components from those of interest by applying clustering methods based on high-order statistics computed on these components. Furthermore, on the basis of the described numerical strategy, it was also possible to reconstruct a cleaned chromatogram with minimum influence of noise and baseline artifacts. This can present a significant advance towards the objective of providing helpful tools for the automated development of liquid chromatography (LC) methods. It seems that analytical investigations could be shortened when using this type of methodologies.

Implementation of a design space approach for enantiomeric separations in polar organic solvent chromatography

This paper focuses on implementing a design space approach and on the critical process parameters (CPPs) to consider when applying the Quality by Design (QbD) concepts outlined in ICH Q8(R2), Q9 and Q10 to analytical method development and optimization for three chiral compounds developed as modulators of small conductance calcium-activated potassium (SK) channels. In this sense, an HPLC method using a polysaccharide-based stationary phase containing a cellulose tris (4-chloro-3-methylphenylcarbamate) chiral selector in polar organic solvent chromatography mode was considered. The effects of trifluoroacetic acid (TFA) and n-hexane concentration in an acetonitrile (MeCN) mobile phase were investigated under a wide range of column temperatures. Good correlations were found between the observed data obtained after using a central composite design and the expected chromatographic behaviours predicted by applying the design of experiments-design space (DoE-DS) methodology. The critical quality attribute represented here by the separation criterion (S(crit)) allowed assessing the quality of the enantioseparation. Baseline separation for the compounds of interest in an analysis time of less than 20 min was possible due to the original and powerful tools applied which facilitated an enhanced method comprehension. Finally, the advantage of the DoE-DS approach resides in granting the possibility to concurrently assess robustness and identify the optimal conditions which are compound dependent.

Determination of verapamil and norverapamil in human plasma by liquid chromatography: Comparison between a liquid—liquid extraction procedure and an automated liquid—solid extraction method for sample preparation

A conventional liquid-liquid extraction (LLE) procedure with high-performance liquid chromatography (HPLC) has been developed for the determination of verapamil and its main metabolite, norverapamil, in plasma. After addition of the internal standard, plasma samples were basified with phosphate buffer (pH 9.0) and extracted with a mixture of cyclohexane-dichloromethane. After centrifugation, the organic layer was separated and the analytes were extracted back into a 0.1 N sulphuric acid solution containing 2-aminoheptane. An aliquot of this aqueous phase was then injected directly onto the HPLC column. This LLE procedure has been compared with an automated liquid-solid extraction (LSE) method that has been developed in parallel. Good linearity was obtained using both extraction methods. The absolute recoveries for the two analytes were ca 95% with the automated LSE procedure and slightly lower (ca 84%) for the LLE method. The automated method gives better results with respect to detectability and precision, but the LLE procedure is simpler to develop, requires much less expensive equipment, and remains a useful alternative when the number of samples to be analysed is limited.

Determination of the enantiomers of 3-tert.-butylamino-1,2-propanediol by high-performance liquid chromatography using mass spectrometric detection

The chiral synthesis of beta-blockers such as (S)-timolol requires a sensitive analytical method for the enantioseparation of its intermediate, 3-tert.-butylamino-1,2-propanediol, in the ng/ml range. The method developed is based on on-line normal-phase LC-MS-MS using a chiral stationary phase and an atmospheric pressure chemical ionization (APCI) interface. The MS detection of 3-tert.-butylamino-1,2-propanediol was first optimized with a pneumatically-assisted electrospray interface (ionspray). The APCI interface was then selected for LC-MS-MS because of the incompatibility of electrospray with n-hexane. The method was validated for both enantiomers in the 25-500 ng/ml concentration range.

Determination of meprobamate in pharmaceutical dosage forms also containing carbromal by liquid chromatography and indirect photometric detection

In a pharmaceutical form also containing carbromal, meprobamate could not be quantified selectively by classical methods described in pharmacopoeias due to a significant interference from carbromal. Consequently, reversed-phase HPLC methods have been developed to separate the two active ingredients using indirect photometric detection to visualize and determine meprobamate which has very poor chromophoric properties. Different parameters influencing the sensitivity of the indirect response, such as the nature of the highly absorbing compound added to the mobile phase (the marker) as well as the methanol content and the pH of this phase, have been studied. Two chromatographic systems containing benzoic acid or cinnamic acid as the marker, have been optimized and validated. Good linearity and reproducibility have been obtained with both systems but the cinnamic acid method has the advantage that meprobamate and carbromal can be determined simultaneously at 273 nm.