Audrey Drelich

Physico-chemical properties and cytotoxic effects of sugar-based surfactants: Impact of structural variations

Surfactants derived from the biorefinery process can present interesting surface-active properties, low cytotoxicity, high biocompatibility and biodegradability. They are therefore considered as potential sustainable substitutes to currently used petroleum-based surfactants. To better understand and anticipate their performances, structure-property relationships need to be carefully investigated. For this reason, we applied a multidisciplinary approach to systematically explore the effect of subtle structural variations on both physico-chemical properties and biological effects. Four sugar-based surfactants, each with an eight carbon alkyl chain bound to a glucose or maltose head group by an amide linkage, were synthesized and evaluated together along with two commercially available standard surfactants. Physico-chemical properties including solubility, Krafft point, surface-tension lowering and critical micellar concentration (CMC) in water and biological medium were explored. Cytotoxicity evaluation by measuring proliferation index and metabolic activity against dermal fibroblasts showed that all surfactants studied may induce cell death at low concentrations (below their CMC). Results revealed significant differences in both physico-chemical properties and cytotoxic effects depending on molecule structural features, such as the position of the linkage on the sugar head-group, or the orientation of the amide linkage. Furthermore, the cytotoxic response increased with the reduction of surfactant CMC. This study underscores the relevance of a methodical and multidisciplinary approach that enables the consideration of surfactant solution properties when applied to biological materials. Overall, our results will contribute to a better understanding of the concomitant impact of surfactant structure at physico-chemical and biological levels.

Composition Ripening in Mixed Water-in-Oil Emulsions Stabilized with Solid Particles

Water and oil transport in emulsified systems is far from being elucidated. Calorimetric analysis has proved to be an appropriate technique to study composition ripening in mixed water in oil emulsions. In this article, the role of the stabilizing agent is studied and particular attention is given to emulsions stabilized solely with solid particles. Mixed emulsions are prepared by mixing two simple water-in-oil (W/O) emulsions, one with pure water droplets and one with droplets containing an aqueous urea solution. At different time intervals, a sample is introduced in a calorimeter cell and submitted to successive cooling and heating cycles. During the cooling phase, the aqueous internal phase solidifies at a temperature which depends on its composition. Just after the mixed emulsion was prepared, the calorimetric experiment identified two solidification peaks, one corresponding to pure water droplets, and the other one to urea solutions. After a long enough stabilization time, just one peak was observed, showing that the systems evolved toward one type of droplets characterized by a unique composition, due to water transfer between the two aqueous phases. The effect of emulsion stabilizing agent (particles or nonionic emulsifier) on the kinetics of water transfer was investigated.

Mixed O/W emulsions stabilized by solid particles: A model system for controlled mass transfer triggered by surfactant addition

This article deals with a model mixed oil-in-water (O/W) emulsion system developed to study the effect of surfactants on mass transfer between dispersed oil droplets of different composition. In this purpose, our goal was to formulate O/W emulsions without any surface active agents as stabilizer, which was achieved by replacing surfactants by a mixture of hydrophilic/hydrophobic silica particles. Then, to study the specific role of surfactants in the oil transfer process, different types and concentrations of surfactants were added to the mixed emulsion after its preparation. In such a way, the same original emulsion can be used for all experiments and the influence of various surface active molecules on the oil transfer mechanism can be directly studied. The model mixed emulsion used consists of a mixture of hexadecane-in-water and tetradecane-in-water emulsions. The transfer between tetradecane and hexadecane droplets was monitored by using differential scanning calorimetry, which allows the detection of freezing and melting signals characteristic of the composition of the dispersed oil droplets. The results obtained showed that it is possible to trigger the transfer of tetradecane towards hexadecane droplets by adding surfactants at concentrations above their critical micellar concentration, measured in presence of solid particles, through micellar transport mechanism.

Comparison of transport between two bacteria in saturated porous media with distinct pore size distribution

The transport of Escherichia coli (1.1 μm) and Klebsiella sp. (1.5 μm) were performed in three porous media with different grain and pore size distributions under saturated flow conditions to explore the coupled effect of porous size distribution and bacteria cell properties on microbial transport. A two-region mobile–immobile model that account for non-uniform transport in porous media was used to quantify the uniformity of bacteria flow pathways. Bacteria flow pathways were more non-uniform compared to those of water tracer for each porous medium. While the non-uniformity of bacteria flow pathways increased with the increasing of the physical heterogeneity of the porous media for Klebsiella sp., no clear tendency was obtained for E. coli. Different behaviors in term of E. coli and Klebsiella sp. cells retention were observed: similar retention rates were obtained in all porous media for the motile E. coli, whereas the non-motile Klebsiella sp. retention decreased in the medium that exhibited larger pores and a wide range of the pore size distribution. These results indicated that bacteria transport and retention were simultaneously dependent to both pore size distribution and bacteria cell properties.

Catalytic Synthesis of a New Series of Alkyl Uronates and Evaluation of Their Physicochemical Properties

Large quantities (>3 g) of a new series of alkyl uronates were synthesized in two steps from commercial methyl hexopyranosides. Firstly, several tens of grams of free methyl α-d-glucopyranoside were selectively and quantitatively oxidized into corresponding sodium uronate using 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO)-catalyzed oxidation. Hydrophobic chains of different length were then introduced by acid-mediated esterification with fatty alcohols (ethyl to lauryl alcohol) leading to the desired alkyl glucuronates with moderate to good yields (49%–72%). The methodology was successfully applied to methyl α-d-mannopyranoside and methyl β-d-galactopyranoside. Physicochemical properties, such as critical micelle concentration (CMC), equilibrium surface tension at CMC (γcmc), solubility, and Krafft temperature were measured, and the effect of structural modifications on surface active properties and micelle formation was discussed.