Avijit Jana

Perylene-Derived Single-Component Organic Nanoparticles with Tunable Emission: Efficient Anticancer Drug Carriers with Real-Time Monitoring of Drug Release

An organic nanoparticle-based drug delivery system with high drug loading efficacy (∼79 wt %) was developed using a perylene-derived photoremovable protecting group, namely, perylene-3,4,9,10-tetrayltetramethanol (Pe(OH)4). The anticancer drug chlorambucil was protected by coupling with Pe(OH)4 to form photocaged nanoparticles (Pe(Cbl)4). The photorelease mechanism of chlorambucil from the Pe(Cbl)4 conjugate was investigated experimentally by high-resolution mass spectrometry and theoretically by density functional theory calculations. The Pe(Cbl)4 nanoparticles perform four important roles: (i) a nanocarrier for drug delivery, (ii) a phototrigger for drug release, (iii) a fluorescent chromophore for cell imaging, and (iv) a photoswitchable fluorophore for real-time monitoring of drug release. Tunable emission of the perylene-derived nanoparticles was demonstrated by comparing the emission properties of the Pe(OH)4 and Pe(Cbl)4 nanoparticles with perylene-3-ylmethanol. These nanoparticles were subsequently employed in cell imaging for investigating their intracellular localization. Furthermore, the in vivo toxicity of the Pe(OH)4 nanoparticles was investigated using the mouse model. Histological tissue analysis of five major organs, i.e., heart, kidney, spleen, liver, and lung, indicates that the nanoparticles did not show any obvious damage to these major organs under the experimental conditions. The current research presents a successful example of integrating multiple functions into single-component organic nanoparticles for drug delivery.

Size-Dependent Catalytic Activity of Palladium Nanoparticles Fabricated in Porous Organic Polymers for Alkene Hydrogenation at Room Temperature

Ultrafine palladium nanoparticles (Pd NPs) with 8 and 3 nm sizes were effectively fabricated in triazine functionalized porous organic polymer (POP) TRIA that was developed by nonaqueous polymerization of 2,4,6-triallyoxy-1,3,5-triazine. The Pd NPs encapsulated POP (Pd-POP) was fully characterized using several techniques. Further studies revealed an excellent capability of Pd-POP for catalytic transfer hydrogenation of alkenes at room temperature with superior catalytic performance and high selectivity of desired products. Highly flammable H2 gas balloon at high pressure and temperature used in conventional hydrogenation reactions was not needed in the present synthetic system. Catalytic activity is strongly dependent on the size of encapsulated Pd NPs in the POP. The Pd-POP catalyst with Pd NPs of 8 nm in diameter exhibited higher catalytic activity for alkene hydrogenation as compared with the Pd-POP catalyst encapsulating 3 nm Pd NPs. Computational studies were undertaken to gain insights into different catalytic activities of these two Pd-POP catalysts. High reusability and stability as well as no Pd leaching of these Pd-POP catalysts make them highly applicable for hydrogenation reactions at room temperature.

Fluorescent caged compounds of 2,4-dichlorophenoxyacetic acid (2,4-d): photorelease technology for controlled release of 2,4-D.

A novel controlled-release formulation (CRF) of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) was developed to reduce its negative environmental impacts by improving its herbicidal efficacy. The 2,4-D was chemically caged by coupling with photoremovable protecting groups (PRPGs) of coumarin derivatives. Photophysical studies of caged compounds showed that they all exhibited strong fluorescence properties. Controlled release of 2,4-D was achieved by irradiating the caged compounds using UV-vis light (310, 350, and 410 nm). The effect of various factors such as pH, solvent, and different substituents at the seventh position of coumarin moiety on the rate of photorelease was studied. The herbicidal activity of caged compounds and 4-(hydroxymethyl)-7-substituted coumarins was studied against Vigna radiata . The new formulation provided greater control over the release of 2,4-D by UV-vis light and also demonstrated the potential of the PRPGs not only to act as a delivery device but also to possess herbicidal activity after photorelease.

Photoresponsive real time monitoring silicon quantum dots for regulated delivery of anticancer drugs

Recently, photoresponsive nanoparticles have been widely used to develop drug delivery systems (DDSs) wherein light is used as an external stimulus to trigger drug release in a spatially and temporally controlled fashion. Real time monitoring DDSs are also gaining much interest due to their capability of monitoring drug release in situ. In this context we designed a new photoresponsive real time monitoring nanoparticle based on photoluminescent silicon quantum dots (SiQDs) using the o-nitrobenzyl (ONB) derivative as a phototrigger for the controlled release of anticancer drug chlorambucil (Cbl). The strong fluorescence of SiQDs was initially quenched by ONB. Upon irradiation ONB triggered the release of the drug switching on the fluorescence of SiQDs to monitor the drug release. We reported a new and simple strategy to synthesise amine functionalised silicon quantum dots and covalently conjugated phototrigger ONB with caged anticancer drug Cbl onto it. Newly designed photoresponsive theranostic ONBCbl-SiQDs performed three important functions: (i) nanocarriers for drug delivery, (ii) controlled drug release under both one photon and two-photon excitation, and (iii) photoswitchable fluorescent nanoparticles for real-time monitoring of drug release based on the photoinduced electron transfer (PET) process. In vitro biological studies revealed the efficient cellular internalisation and cancer cell destruction ability of ONBCbl-SiQDs upon photoirradiation. ONBCbl-SiQDs exhibit a successful example of combining multiple functions into a single system for drug delivery systems.

Photocontrolled Nuclear-Targeted Drug Delivery by Single Component Photoresponsive Fluorescent Organic Nanoparticles of Acridin-9-Methanol

We report for the first time an organic nanoparticle based nuclear-targeted photoresponsive drug delivery system (DDS) for regulated anticancer drug release. Acridin-9-methanol fluorescent organic nanoparticles used in this DDS performed three important roles: (i) ″nuclear-targeted nanocarrier″ for drug delivery, (ii) ″phototrigger″ for regulated drug release, and (iii) fluorescent chromophore for cell imaging. In vitro biological studies reveal acridin-9-methanol nanoparticles of ~60 nm size to be very efficient in delivering the anticancer drug chlorambucil into the target nucleus, killing the cancer cells upon irradiation. Such targeted organic nanoparticles with good biocompatibility, cellular uptake property, and efficient photoregulated drug release ability will be of great benefit in the field of targeted intracellular controlled drug release.

Refined Sulfur Nanoparticles Immobilized in Metal–Organic Polyhedron as Stable Cathodes for Li–S Battery

The lithium-sulfur (Li-S) battery presents a promising rechargeable energy storage technology for the increasing energy demand in a worldwide range. However, current main challenges in Li-S battery are structural degradation and instability of the solid-electrolyte interphase caused by the dissolution of polysulfides during cycling, resulting in the corrosion and loss of active materials. Herein, we developed novel hybrids by employing metal-organic polyhedron (MOP) encapsulated PVP-functionalized sulfur nanoparticles (S@MOP), where the active sulfur component was efficiently encapsulated within the core of MOP and PVP as a surfactant was helpful to stabilize the sulfur nanoparticles and control the size and shape of corresponding hybrids during their syntheses. The amount of sulfur embedded into MOP could be controlled according to requirements. By using the S@MOP hybrids as cathodes, an obvious enhancement in the performance of Li-S battery was achieved, including high specific capacity with good cycling stability. The MOP encapsulation could enhance the utilization efficiency of sulfur. Importantly, the structure of the S@MOP hybrids was very stable, and they could last for almost 1000 cycles as cathodes in Li-S battery. Such high performance has rarely been obtained using metal-organic framework systems. The present approach opens up a promising route for further applications of MOP as host materials in electrochemical and energy storage fields.

Development of 1-hydroxy-2(1H)-quinolone-based photoacid generators and photoresponsive polymer surfaces.

A new class of carboxylate and sulfonate esters of 1-hydroxy-2(1H)-quinolone has been demonstrated as nonionic photoacid generators (PAGs). Irradiation of carboxylates and sulfonates of 1-hydroxy-2(1H)-quinolone by UV light (λ≥310 nm) resulted in homolysis of weak N-O bond leading to efficient generation of carboxylic and sulfonic acids, respectively. The mechanism for the homolytic N-O bond cleavage was supported by time-dependent DFT calculations. Photoresponsive 1-(p-styrenesulfonyloxy)-2-quinolone-methyl methacrylate (SSQL-MMA) and 1-(p-styrenesulfonyloxy)-2-quinolone-lauryl acrylate (SSQL-LA) copolymers were synthesized from PAG monomer 1-(p-styrenesulfonyloxy)-2-quinolone, and subsequently controlled surface wettability was demonstrated for the above-mentioned photoresponsive polymers.

Morphology Tuning of Self-Assembled Perylene Monoimide from Nanoparticles to Colloidosomes with Enhanced Excimeric NIR Emission for Bioimaging

Organic near-infrared (NIR) fluorescent probes have been recognized as an emerging class of materials exhibiting a great potential in advanced bioanalytical applications. However, synthesizing such organic probes that could simultaneously work in the NIR spectral range and have large Stokes shift, high stability in biological systems, and high photostability have been proven challenging. In this work, aggregation induced excimeric NIR emission in aqueous media was observed from a suitably substituted perylene monoimide (PeIm) dye. Controlled entrapment of the dye into pluronic F127 micellar system to preserve its monomeric green emission in aqueous media was also established. The aggregation process of the PeIm dye to form organic nanoparticles (NPs) was evaluated experimentally by the means of transmission electron microscope imaging as well as theoretically by the molecular dynamics simulation studies. Tuning the morphology along with the formation of colloidosomes by the controlled self-aggregation of PeIm NPs in aqueous suspension was demonstrated successfully. Finally, both excimeric and monomeric emissive PeIm NPs as well as PeIm colloidosomes were employed for the bioimaging in vitro.

Effect of growth temperature on the CVD grown Fe filled multi-walled carbon nanotubes using a modified photoresist

Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron(III) acetylacetonate (Fe(acac){sub 3}) with a conventional photoresist and the effect of growth temperature (550-950 {sup o}C) on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 {sup o}C, the average diameter of the nanotubes increases while their number density decreases. High resolution transmission electron microscopy along with energy dispersive X-ray investigation shows that the nanotubes have a multi-walled structure with partial Fe filling for all growth temperatures. The graphitic nature of the nanotubes was observed via X-ray diffraction pattern. Raman analysis demonstrates that the degree of graphitization of the carbon nanotubes depends upon the growth temperature.

Synthesis and in vitro evaluation of charge reversal photoresponsive quinoline tethered mesoporous silica for targeted drug delivery

We developed excellent charge reversal photoresponsive nanoparticles for targeted delivery of the anticancer drug chlorambucil. The charge reversal photoresponsive nanoparticles were constructed using two main ingredients, namely folic acid decorated mesoporous silica and quinoline chromophore. The newly synthesized quinoline chromophore performed three important roles, i.e., (i) fluorescent chromophore for cell imaging, (ii) phototrigger for regulated release of anticancer drug, and (iii) charge reversal based on its zeta potential for nuclear localization. Furthermore, folic acid decorated mesoporous silica facilitated active internalization of the drug inside the cancer cells. In vitro biological studies reveal that our photoresponsive DDS could deliver the anticancer drug chlorambucil into the tumor cells, killing the cancer cells by both one photon (≥365 nm) and two photon (675 nm) irradiation.