Awesh K. Yadav

Eudragit-coated pectin microspheres of 5-fluorouracil for colon targeting.

An objective of the present investigation was to prepare and evaluate Eudragit-coated pectin microspheres for colon targeting of 5-fluorouracil (FU). Pectin microspheres were prepared by emulsion dehydration method using different ratios of FU and pectin (1:3 to 1:6), stirring speeds (500–2000 rpm) and emulsifier concentrations (0.75%–1.5% wt/vol). The yield of preparation and the encapsulation efficiencies were high for all pectin microspheres. Microspheres prepared by using drug:polymer ratio 1:4, stirring speed 1000 rpm, and 1.25% wt/vol concentration of emulsifying agent were selected as an optimized formulation. Eudragit-coating of pectin microspheres was performed by oil-in-oil solvent evaporation method using coat: core ratio (5:1). Pectin microspheres and Eudragit-coated pectin microspheres were evaluated for surface morphology, particle size and size distribution, swellability, percentage drug entrapment, and in vitro drug release in simulated gastrointestinal fluids (SGF). The in vitro drug release study of optimized formulation was also performed in simulated colonic fluid in the presence of 2% rat cecal content. Organ distribution study in albino rats was performed to establish the targeting potential of optimized formulation in the colon. The release profile of FU from Eudragit-coated pectin microspheres was pH dependent. In acidic medium, the release rate was much slower; however, the drug was released quickly at pH 7.4. It is concluded from the present investigation that Eudragit-coated pectin microspheres are promising controlled release carriers for colon-targeted delivery of FU.

An insight on hyaluronic acid in drug targeting and drug delivery

Hyaluronic acid (HA) has recently been studied for its use in drug delivery applications. Medically, HA is used as a surgical aid in ophthalmology. It also possesses therapeutic potential in the treatment of arthritis and wound healing. HA-binding receptors, CD44 and receptor for hyaluronan-mediated motility have attracted much enthusiasm, mainly because they are believed to be involved in cancer metastasis. This review unravels the role of HA in drug delivery and targeting. Designing of various novel drug delivery systems using HA as a biopolymer will also be reviewed in the present article.

Preparation and characterization of HA–PEG–PCL intelligent core–corona nanoparticles for delivery of doxorubicin

The objective of the present study was to synthesize core–corona nanoparticles of doxorubicin (DOX) using hyaluronic acid–polyethyleneglycol–polycaprolactone (HA–PEG–PCL) copolymer for tumor targeting. Targeting efficiency of HA–PEG–PCL nanoparticles was compared with non-HA-containing nanoparticles (methoxy poly ethylene glycol (MPEG)–PCL). The copolymers were chemically synthesized and characterized by IR and NMR spectroscopies. The nanoparticles were characterized for shape and morphology by transmission electron microscopy, particle size, percentage of drug entrapment, and in vitro drug release profile. Differential scanning calorimetry and X-ray diffraction studies were also performed to appraise the crystalline or amorphous nature of DOX inside the polymer matrix. Formulations were prepared using different DOX:polymer ratios (1:1–1:3 w/w) and the optimum formulation with the drug:polymer ratio of 1:1 showed the mean particle size of 95 ± 5 nm and entrapment efficiency of 95.56% in the case of HA–PEG–PCL nanoparticles, while the values were 115 nm and 95.50%, respectively, in the case of MPEG–PCL nanoparticles. The HA–PEG–PCL nanoparticles could release DOX for up to 17 days, whereas the MPEG–PCL nanoparticles could release it for up to 14 days. The hemolytic toxicity and hematological studies confirmed that both DOX-loaded HA–PEG–PCL and MPEG–PCL nanoparticles were safe and suitable for sustained and targeted drug delivery. The tissue distribution study and tumor growth inhibition were performed after intravenous injection of nanoparticles in Ehrlich ascites tumor (EAT)-bearing mice. The nanoparticles of HA–PEG–PCL copolymer accomplishes efficient delivery of DOX in EAT tumor when compared with the MPEG–PCL nanoparticles by the process of receptor-mediated endocytosis, as well as enhanced permeability and retention effect.

Development and characterization of hyaluronic acid decorated PLGA nanoparticles for delivery of 5-fluorouracil

The present investigation was aimed to develop and explore the prospective of engineered PLGA nanoparticles as vehicles for targeted delivery of 5-fluorouracil (5-FU). Nanoparticles of 5-FU-loaded hyaluronic acid-poly(ethylene glycol)-poly(lactide-co-glycolide) (HA-PEG-PLGA-FU) copolymer were prepared and characterized by FTIR, NMR, transmission electron microscopy, particle size analysis, DSC, and X-ray diffractometer measurement studies. The nanoparticulate formulation was evaluated for in vitro release, hemolytic toxicity, and hematological toxicity. Cytotoxicity studies were performed on Ehrlich ascites tumor (EAT) cell lines using MTT cell proliferation assay. Biodistribution studies of 99mTc labeled formulation were conducted on EAT-bearing mice. The in vivo tumor inhibition study was also performed after i.v. administration of HA-PEG-PLGA-FU nanoparticles. The HA conjugated formulation was found to be less hemolytic but more cytotoxic as compared to free drug. The hematological data suggested that HA-PEG-PLGA-FU formulation was less immunogenic compared to plain drug. The tissue distribution studies displayed that HA-PEG-PLGA-FU were able to deliver a higher concentration of 5-FU in the tumor mass. In addition, the HA-PEG-PLGA-FU nanoparticles reduced tumor volume significantly in comparison with 5-FU. Thus, it was concluded that the conjugation of HA imparts targetability to the formulation, and enhanced permeation and retention effect ruled out its access to the non-tumor tissues, at the same time favored selective entry in tumors, thereby reducing the side-effects both in vitro and in vivo.

Preparation and Characterization of Oxybenzone-Loaded Gelatin Microspheres for Enhancement of Sunscreening Efficacy

The objective of our present study was to prepare and evaluate gelatin microspheres of oxybenzone to enhance its sunscreening efficacy. The gelatin microspheres of oxybenzone were prepared by emulsion method. Process parameters were analyzed to optimize the formulation. The in vitro drug release study was performed in pH 7.4 using cellulose acetate membrane. Microspheres prepared using oxybenzone:gelatin ratio of 1:6 showed slowest drug release and those prepared with oxybenzone:gelatin ratio of 1:2 showed fastest drug release. The gelatin microspheres of oxybenzone were incorporated in aloe vera gel. Sun exposure method using sodium nitroprusside solution was used for in vitro sunscreen efficacy testing. The formulation C5 containing oxybenzone-bearing gelatin microspheres in aloe vera gel showed best sunscreen efficacy. The formulations were evaluated for skin irritation test in human volunteers, sun protection factor, and minimum erythema dose in albino rats. These studies revealed that the incorporation of sunscreening agent–loaded microspheres into aloe vera gel greatly increased the efficacy of sunscreen formulation more than four times.

Microsphere Based Improved Sunscreen Formulation of Ethylhexyl Methoxycinnamate

Polymethylmethacrylate (PMMA) microspheres of ethylhexyl methoxycinnamate (EHM) were prepared by emulsion solvent evaporation method to improve its photostability and effectiveness as sunscreening agent. Process parameters like stirring speed and aqueous polyvinyl alcohol (PVA) concentration were analyzed in order to optimize the formulations. Shape and surface morphology of the microspheres were examined using scanning electron microscopy. Particle size of the microspheres was determined using laser diffraction particle size analyzer. The PMMA microspheres of EHM were incorporated in water-removable cream base. The in vitro drug release of EHM in pH 7.4 was performed using dialysis membrane. Thin layer chromatography was performed to determine photostability of EHM inside the microspheres. The formulations were evaluated for sun protection factor (SPF) and minimum erythema dose (MED) in albino rats. Cream base formulation containing microspheres prepared using EHM:PMMA in ratio of 1:3 (C(3)) showed slowest drug (EHM) release and those prepared with EHM: PMMA in ratio of 1:1 showed fastest release. The cream base formulations containing EHM loaded microspheres had shown better SPF (more than 16.0) as compared to formulation C(d) that contained 3% free EHM as sunscreen agent and showed SPF 4.66. These studies revealed that the incorporation of EHM loaded PMMA microspheres into cream base had greatly increased the efficacy of sunscreen formulation approximately four times. Further, photostability was also shown to be improved in PMMA microspheres.

Controlled release calcium silicate based floating granular delivery system of ranitidine hydrochloride.

The objective of the present investigation was to prepare and evaluate floating granular delivery system consisting of (i) calcium silicate (CS) as porous carrier; (ii) ranitidine hydrochloride (RH), an anti-ulcer agent; and (iii) hydroxypropyl methylcellulose K4M (HPMC) and ethylcellulose (EC) as matrix forming polymers. The effect of various formulation and process variables on the particle morphology, particle size, micromeritic properties, percent drug content, in vitro floating behavior, and in vitro drug release from the floating granules was studied. The scanning electron microscopy (SEM) of granules revealed that that more pores of CS in secondary coated granules (SCG) were covered by the polymer film than those in primary coated granules (PCG). The formulation demonstrated favorable in vitro floating and drug release characteristics. The in vivo evaluation for the determination of pharmacokinetic parameters was performed in albino rats. Higher plasma concentration was maintained throughout the study period from the floating granules of RH. The enhanced bioavailability and elimination half-life observed in the present study may be due to the floating nature of the dosage form. The results suggested that CS is a useful carrier for the development of floating and sustained release preparations.

Eudragit-coated dextran microspheres of 5-fluorouracil for site-specific delivery to colon

Abstract Objective of the present investigation was to prepare and evaluate the potential of enteric coated dextran microspheres for colon targeting of 5-fluorouracil (5-FU). Dextran microspheres were prepared by emulsification-crosslinking method and the formulation variables studied included different molecular weights of dextran, drug:polymer ratio, volume of crosslinking agent, stirring speed and time. Enteric coating (Eudragit S-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method using different coat:core ratios (4:1 or 8:1). Uncoated and coated dextran microspheres were characterized by particle size, surface morphology, entrapment efficiency, DSC, in vitro drug release in the presence of dextranase and 2% rat cecal contents. The release study of 5-FU from coated dextran microspheres was pH dependent. No release was observed at acidic pH; however, the drug was released quickly where Eudragit starts solublizing there was continuous release of drug from the microspheres. Organ distribution study was suggested that coated dextran microspheres retard the release of drug in gastric and intestinal pH environment and released of drug from microspheres in colon due to the degradation of dextran by colonic enzymes.

Preliminary investigation for wound healing and anti-inflammatory effects of Bambusa vulgaris leaves in rats.

Background Bambusa vulgaris (Family: Poaceae) used in Ayurveda for paralytic complaints, inflammatory disorders and externally to skin disorders. It has various medicinal uses with good nutritional composition and a rich source of vitamins, proteins, amino acid, beta-carotene and phenolic compounds. Objective The present study was aimed to evaluate wound healing and anti-inflammatory potential of ethanol extract of B. vulgaris leaves in rats. Materials and methods The B. vulgaris leaves were evaluated for wound healing on incision and excision wound methods. Anti-inflammatory effect was evaluated by measurement of paw edema in carrageenan-induced inflammation in rats. Ethyl acetate (BVL-A) and aqueous (BVL-B) fractions from the ethanol extract of leaves were screened for wound healing effects by measuring tensile strength and biochemical parameters in incision wound method. The wound contraction area, antioxidant status and histopathological studies were done in excision wound method. Results Tensile strength and hydroxyproline level of 5% w/w ointment of BVL-A and BVL-B treated groups were found significantly (P < 0.01) higher and comparable to the reference group. The histopathological study showed the proliferation of collagen, fibrous tissue, and capillaries with epidermal covering at the margin of the wound. The percent inhibition of paw edema was significantly decrease by increasing concentration of BVL-A and BVL-B fractions. In addition, it was found that B. vulgaris possesses antioxidant properties, by its ability to increase antioxidants level. Conclusions The results obtained in the present study were indicated that ethyl acetate fraction of B. vulgaris leaves inhibits paw edema and accelerates cutaneous wound healing.

In-vitro and in-vivo assessment of dextran-appended cellulose acetate phthalate nanoparticles for transdermal delivery of 5-fluorouracil

Abstract The aim of this research was transdermal delivery of 5-fluorouracil (5-FU) using dextran-coated cellulose acetate phthalate (CAP) nanoparticulate formulation. CAP nanoparticles were prepared using drug-polymer ratio (1:1 to 1:3) and surfactant ratio (2.5, 5 and 10%). Dextran coating was made using aminodextran. The results showed that the optimized CAP nanoparticles (CNs) and dextran-coated CAP nanoparticles represented core-corona nanoparticles with the mean diameter of 75 ± 3 and 79 ± 2 nm, respectively, and entrapment efficiency was 82.5 ± 0.06 and 78.2 ± 0.12, respectively. Dextran-coated nanoparticles (FDCNs) and CAP nanoparticles (FCNs) showed in vitro 5-FU release upto 31 h and 8 h, respectively. Moreover, the cumulative amount of 5-FU penetrated through excised skin from FDCNs was 2.94 folds than that of the FU cream. Concentration of 5-FU in epidermis and dermis were also studied. In dermis, concentration of 5-FU was found higher in case of FDCN formulation than plain FU cream. FDCNs were found more hemocompatible in comparison to FCNs. The hematological data recommended that FDCNs formulation was less immunogenic compared to FU creams formulation. In blood level study, FDCNs exhibited 153, 12, 16.66 and 16.24-fold higher values for area under the curve, Tmax, Cmax and mean residence time (MRT) compared with those of FU cream, respectively. The in-vitro cytotoxicity was assessed using the MCF-7 by the MTT test and was compared to the plain 5-FU solution. All the detailed evidence showed that FDCNs could provide a promising tuning as a transdermal delivery system of 5-FU.