Ayad Hameed

New photostabilizers for polystyrene based on 2,3-dihydro-(5-mercapto-1,3,4-oxadiazol-2-yl)-phenyl-2-(substituted)-1,3,4-oxazepine- 4,7-dione compounds

The photostabilization of polystyrene (PS) films by 2,3-dihydro-(5-mercapto-1,3,4-oxadiazol-2-yl)-phenyl-2-(substituted)-1,3,4-oxazepine-4,7-dione compounds was investigated. PS films containing concentration of complexes 0.5% by weight were produced by the casting method from chloroform as a solvent. The photostabilization activities of these compounds were determined by monitoring the carbonyl and hydroxyl indices with irradiation time. The changes in viscosity average molecular weight of PS with irradiation time were also tracked (using benzene as a solvent). The quantum yield of the chain scission (Φcs) of these complexes in PS films was evaluated and found to range between 3.31 × 10-6 and 7.89 × 10-6. Results obtained showed that the rate of photostabilization of PS in the presence of the additive follows the trend (I > II > III > IV). According to the experimental results obtained, several mechanisms were suggested depending on the structure of the additive like UV absorption, peroxide decomposer and radical scavenger.

Synthesis and Mesomorphic Properties of New Columnar Liquid Crystal Containing 1,3,5-triiminebenzene with Pendant 1,3,4-thiadiazole Group

A novel discotic liquid crystal series based on 1,3,5-benzenetrisazomethine derivatives with three pendant 2-amino-5-(4′-n-alkoxy)phenyl-1,3,4-thiadiazole has been synthesized, which is the first columnar molecules containing 1,3,4-thiadiazole moiety exhibiting a discotic liquid crystal. The molecular structure of compounds was confirmed by FT-IR, 1H-NMR, and mass spectroscopy and elemental analysis. The electron excitation properties of these compounds were investigated by UV-vis absorption spectroscopy. Their liquid crystalline properties were studied by polarizing optical microscopy and differential scanning calorimetry. The formation of a columnar mesophase was found to be dependent on the number of methylene unit in alkoxy side chains.

New Eco-Friendly Phosphorus Organic Polymers as Gas Storage Media

Three phosphate esters 1–3 were successfully synthesized from the reaction of 2-, 3- and 4-hydroxybenzaldehyde with phosphoryl chloride. Reactions of 1–3 with benzidine in the presence of glacial acetic acid gave the corresponding novel phosphorus organic polymers 4–6 containing the azomethane linkage. The structures of the synthesized compounds were confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance and elemental analysis. Interesting physiochemical properties for the polymeric materials 4–6 were observed using a combination of several techniques such as gel permeation chromatography, scanning electron microscopy, Brunauer–Emmett–Teller and nitrogen adsorption–desorption isotherm, Barrett–Joyner–Halenda and H-sorb 2600 analyzer. The mesoporous polymers 4–6 exhibit tunable porosity with Brunauer–Emmett–Teller surface area (SABET = 24.8–30 m2·g–1), pore volume (0.03–0.05 cm3·g–1) and narrow pore size distribution, in which the average pore size was 2.4–2.8 nm. Polymers 4–6 were found to have high gas storage capacity and physico-chemical stability, particularly at a high pressure. At 323 K and 50 bars, polymers 4–6 have remarkable carbon dioxide uptake (up to 82.1 cm3·g–1) and a low hydrogen uptake (up to 7.4 cm3·g–1). The adsorption capacity of gasses for polymer 5 was found to be higher than those for polymers 4 and 6.

New Tetra-Schiff Bases as Efficient Photostabilizers for Poly(vinyl chloride)

Three new tetra-Schiff bases were synthesized and characterized to be used as photostabilizers for poly(vinyl chloride) (PVC) films. The photostability of PVC films (40 μm thickness) in the presence of Schiff bases (0.5 wt %) upon irradiation (300 h) with a UV light (λmax = 365 nm and light intensity = 6.43 × 10−9 ein∙dm−3∙s−1) was examined using various spectroscopic measurements and surface morphology analysis. The changes in various functional groups’ indices, weight and viscosity average molecular weight of PVC films were monitored against irradiation time. The additives used showed photostability for PVC films, with Schiff base 1 being the most effective additive upon irradiation, followed by 2 and 3. The atomic force microscopy (AFM) images for the PVC surface containing Schiff base 1 after irradiation were found to be smooth, with a roughness factor (Rq) of 36.8, compared to 132.2 for the PVC (blank). Several possible mechanisms that explain PVC photostabilization upon irradiation in the presence of tetra-Schiff bases were proposed.

Design and synthesis of porous polymeric materials and their applications in gas capture and storage: a review

The design and synthesis of porous organic materials that have increasing physical and chemical characteristics have been discussed. For example, a variety of porous organic polymers, metal–organic frameworks, conjugated microporous polymers, and polymers of intrinsic microporosity have been designed and synthesized using simple and efficient procedures. Such materials have unique gas adsorption properties and can be used in gases separation and storage. In addition, they have high surface area, porosity, and selectivity towards carbon dioxide compared to other gases such as nitrogen and methane.

Polyphosphates as Inhibitors for Poly(vinyl Chloride) Photodegradation

Three polyphosphates were used as inhibitors for poly(vinyl chloride) (PVC) photodegradation. The polyphosphates were added to PVC at a concentration of 0.5% by weight. The PVC films (40 µm thickness) were irradiated at room temperature with ultraviolet (UV) light for up to 300 h. The changes in PVC films after irradiation were monitored by Fourier transform infrared spectroscopy, weight loss, viscosity-average molecular weight determination, and atomic force microscopy. These changes were very noticeable in the blank PVC films compared to the ones obtained when additives were used. The polyphosphates can inhibit the PVC photodegradation through direct absorption of UV light, interactions with PVC chains, and acting as radical scavengers.

2-(1,3-Dioxoisoindolin-2-yl)acetic acid–N′-[(E)-2-meth­oxy­benzyl­idene]pyridine-4-carbohydrazide (1/1)

In the title 1:1 cocrystal, C10H7NO4·C14H13N3O2, molecules are linked by intermolecular C—H⋯O, N—H⋯O and O—H⋯N hydrogen bonds, forming a three-dimensional network. In addition, π–π stacking interactions [with centroid–centroid distances of 3.5723 (19) and 3.6158 (18) Å] are observed.

Fabrication of Novel Ball-Like Polystyrene Films Containing Schiff Base Microspheres as Photostabilizers

Polystyrene films containing a low concentration of three highly aromatic Schiff bases were prepared using the casting method. The polystyrene films were irradiated with ultraviolet light (300 h). The polystyrene infrared spectra, weight loss, molecular weight reduction and the surface morphology were examined upon irradiation. The Schiff bases acted as photostabilizers and reduced the photodegradation of polystyrene films to a significant level in comparison to the blank film. The images recorded of the surface of the miscible polystyrene/Schiff base blends showed novel ball-like microspheres with a diameter of 3.4–4.3 µm. The Schiff bases were able to endow excellent protection to polystyrene against ultraviolet irradiation.