Ayhan Aytin
Düzce University
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Ayhan Aytin.
Maderas-ciencia Y Tecnologia | 2015
Süleyman Korkut; Ayhan Aytin
The aim of this study is to determine the change of some physical properties (oven-dry density, weight loss, swelling and anti-swelling efficiency) and mechanical properties (compression strength parallel to grain, bending strength, modulus of elasticity in bending, janka-hardness (cross-section, radial, tangential), impact bending strength and tension strength perpendicular to grain) of wild cherry woods after heat treatment under different durations. Specimens are exposed to temperature levels of 212 °C for time spans of 1,5 and 2,5 h. Based on the findings in this study, the results showed that oven-dry density, swelling, compression strength parallel to grain, bending strength, modulus of elasticity in bending, janka-hardness (Cross-section, Radial, Tangential), impact bending strength and tension strength perpendicular to grain values decreased with increasing treatment time.
Maderas-ciencia Y Tecnologia | 2013
Süleyman Korkut; Öner Ünsal; Duygu Kocaefe; Ayhan Aytin; Asli Gökyar
Wild cherry wood (Cerasus avium) lumber with a nominal thickness of 5 cm from Duzce region in Turkey was dried through conventional kiln drying using two different programs which are unprotective drying schedules, and protective drying schedules. The aim was to obtain the most desirable kiln schedule for keeping the wood quality at an appropriate level up to final moisture content of 12±2% was reached. Intensity of warping (twist, bow, cup, crook) occurrence, superficial, internal and end checks, residual stresses, drying rate, and moisture gradient in the dried woods were measured, and the results were analyzed. The results showed that there was a more homogeneous moisture profile, fewer occurrences of superficial checks, and absence of internal checks in the protective drying schedules due to low warping values compared to the unprotective drying schedules. Therefore, it seems that protective drying schedules might be recommended as optimum program for wild cherry lumber drying at commercial scale from Duzce region.
Bioresources | 2013
Derya Sevim Korkut; Salim Hiziroglu; Ayhan Aytin
Journal of Forestry Research | 2016
Ayhan Aytin; Süleyman Korkut
Wood research | 2009
Süleyman Korkut; Bilgin Guller; Ayhan Aytin; M. S. Kök
Drvna industrija : Znanstveni časopis za pitanja drvne tehnologije | 2016
Ayhan Aytin; Süleyman Korkut; Nusret As; Öner Ünsal; Gokhan Gunduz
Bioresources | 2015
Ayhan Aytin; Süleyman Korkut; Öner Ünsal; Nevzat Çakicier
İleri Teknoloji Bilimleri Dergisi | 2017
Ayhan Aytin; Süleyman Korkut; Öner Ünsal; Nusret As
İleri Teknoloji Bilimleri Dergisi | 2016
Ayhan Aytin; Süleyman Korkut; Öner Ünsal; Nusret As; Nevzat Çakicier
İleri Teknoloji Bilimleri Dergisi | 2016
Ayhan Aytin; Süleyman Korkut; Hamiyet Şahin Kol