Aynur Emine Cicekcibasi

Distal femur morphometry: a gender and bilateral comparative study using magnetic resonance imaging

Among the anthropometric factors to be considered, anatomic differences in the distal femur and intercondylar notch have been implicated as a cause of the different rates of anterior cruciate ligament (ACL) rupture between men and women; therefore, in this study our aim was to evaluate a number of morphometric measurements in the distal part of the femur. Two hundred knee MRI examinations were analyzed: 56 male right, 44 male left, 42 female right and 58 female left. Measurements of the intercondylar height (ICH), intercondylar width (ICW), medial condylar width (MCW), lateral condylar width (LCW) and epicondylar width (EW) were obtained. The notch shape index (NSI) was also calculated. Statistical analysis for comparisons was done by Student’s t-test. Correlations between the parameters studied were calculated by Pearson correlation coefficients. Significant bilateral differences were not found (p>0.05). In all measurements, males showed significantly greater values than females (p<0.001). No difference was seen in the NSI between males and females (p>0.05). Conversely a significant association was obtained between age and all parameters. We conclude that the results of this study may be useful for anatomic evaluation of the distal femur region prior to orthopaedic operations.

Radial Artery Graft for Bypass of the Maxillary to Proximal Middle Cerebral Artery: An Anatomic and Technical Study

OBJECTIVEIn this study, we aimed to investigate the use of a radial artery graft for bypass of the maxillary artery (MA) to the proximal middle cerebral artery (MCA) as an alternative to superficial temporal artery-to-MCA anastomosis or extracranial carotid-to-MCA bypass using long grafts. METHODSFive adult cadavers were used bilaterally. After a frontotemporal craniotomy and a zygomatic arch osteotomy, the MA was found easily 1 to 2 cm inferior to the infratemporal crest. A hole was created with a 4-mm-tip drill in the sphenoid bone 2 to 3 mm lateral to the foramen rotundum extradurally, and the dura over the hole was opened. After the carotid and sylvian cisterns had been opened, the M2 segment of the MCA was exposed. The graft was passed through the hole to reach the M2 segment. Then, the MA was freed from the surrounding tissue and was transected before the infraorbital artery branch. The radial artery graft was anastomosed end-to-end to the MA proximally and end-to-side to the M2 segment of the MCA distally. RESULTSThe mean thickness of the MA before the infraorbital artery branch was 2.6 ± 0.3 mm. The mean thickness of the largest trunk of the MCA was 2.3 ± 0.3 mm. The average length of the graft was 36 ± 5.5 mm. CONCLUSIONMA-to-MCA bypass is as feasible as proximal MCA revascularization using long vein grafts. The thickness of the MA provides sufficient flow; the length of the graft is short, and it has a straight course. MA-to-proximal MCA bypass may be an alternative to superficial temporal artery-to-MCA as well as extracranial carotid-to-MCA bypasses.

Radial artery graft for bypass of the maxillary to proximal posterior cerebral artery: An anatomical and technical study

Objective To examine the use of a radial artery graft for bypass of the maxillary artery (MA) to proximal posterior cerebral artery (PCA) as an alternative to the external carotid artery (ECA) to PCA anastomosis used in posterior circulation bypass surgery. Materials and methods The method was applied to five adult cadaver sides bilaterally. The MA was easily found 1–2 cm beneath the infratemporal crest after a frontotemporal craniotomy and a zygomatic arch osteotomy. Extradurally, 2–3 cm posterolateral to the foramen rotundum, a hole was drilled in the sphenoid bone with a 4-mm tipped drill. After sylvian fissure, the interpedincular and ambient cisternae were opened and the P2 segment of the PCA appeared. The graft was passed through the hole and dura to reach the P2 segment. Proximal to the infraorbital artery branch, the MA was freed from the surrounding tissue and transected. The proximal side of the radial artery graft was anastomosed end-to-end with the MA and the distal side was anastomosed end-to-side with the P2 segment of the PCA. Results The average diameter of the MA proximal to the infraorbital artery branch was 2.6±0.3 mm. The average diameter of the P2 was 2.2±0.2 mm. The average length of the graft was 47±5.2 mm. Conclusion As MA to proximal PCA bypass uses a short radial graft and as the calibers of the MA and PCA are >2 mm such a bypass may provide sufficient blood flow and represents a reasonable alternative to “ECA to PCA” bypass.

Modified medial Stoppa approach for acetabular fractures: an anatomic study.

BACKGROUND The modified medial Stoppa approach is an alternative and new surgical approach to access to the internal pelvis and medial wall of the acetabulum. There is little information about the clinical anatomic specifications of exposure in the literature. In this study, the pertinent surgical anatomy that involved the modified medial Stoppa approach was further defined and the anatomic positions and variations of the structures seen in the surgical site were analyzed. METHODS We dissected five formalized cadavers to present structures at risk in a standard modified medial Stoppa approach. The internal iliac artery and branches were colored with latex injection in formalized cadavers. Morphometrical measurements of the neurovascular structures adjacent to quadrilateral surface and their anatomic variations were noted. RESULTS It was detected that the obturator vessels and nerve and the iliolumbar vessels were primarily the structures at risk. Obturator vessels and nerve were the most important structures to pay attention because of their direct contact to quadrilateral surface. There was communication (corona mortis) between obturator and inferior epigastric veins in 4 (40%) of 10 hemipelvises. CONCLUSIONS Before clinical applications, performing cadaver dissection is important to minimize intraoperative complications. This study was the first anatomic study in the literature that reveals the structures that are at risk during surgical treatment of acetabular fractures, which was treated with the modified medial Stoppa approach.

A variant course of the superficial palmar branch of the radial artery

The objective of this report was to present a case of superficial palmar branch of the radial artery (SPBRA) with a variant course, which to the best of our knowledge, has not been reported in the literature. During anatomical dissections that were carried out in the Department of Anatomy of Suleyman Demirel University School of Medicine to demonstrate the superficial palmar arch, a variation in the course of the SPBRA was noted in the right hand of an adult cadaver. This variant branch ran superficial to, and in contact with, the flexor retinaculum, and ran transversely to join the ulnar artery.

The morphometric development of the fetal larynx during the fetal period

OBJECTIVE The aim of the present study was to investigate morphometric growth patterns of the cartilaginous components and vocal cords in human fetal larynx. METHODS This study was performed in the Anatomy Department of Meram Medicine Faculty in 2007. The fetuses were obtained from the Gynaecology Department of the Meram Medicine Faculty of Selcuk University, and Dr. Faruk Sükan Maternity Hospital (Konya, Turkey). Forty spontaneously aborted fetuses (25 males and 15 females) without detectable malformations were evaluated. The dimensions of the larynx and its cartilaginous components were measured and the relationship between the obtained data was statistically assessed with Students t-test. RESULTS Correlations were found between the cartilaginous components, size of the larynx, and gestational age. No gender differences were identified. The anatomical variations in the epiglottis cartilage dimensions and types were found in 15% of cases. The foramen thyroideum was observed in 12.5% of cases. CONCLUSION The data of this study may contribute to the knowledge of the fetal larynx regarding laryngomalacia.

Superficial temporal artery graft for bypass of the maxillary to proximal middle cerebral artery using a transantral approach: an anatomical and technical study

Conclusion. Using a transantral approach, we examined a new bypass of the maxillary artery (MA) to proximal middle cerebral artery (MCA). The caliber of the MA was suitable to provide sufficient blood flow. The length of the graft was shorter and it had a straighter course in the new technique than in previously described techniques. Objective. To examine a new bypass of the MA to proximal MCA using a transantral approach as an alternative to other forms of anterior circulation bypass surgery. Material and methods. The method was applied to five adult cadavers bilaterally. The MA and its branches were easily found after removal of the posterior sinus wall using a transantral approach. Then, a hole was created in the sphenoid bone 5–6 mm lateral to the posteroinferior edge of the superior orbital fissure extradurally. After the carotid and sylvian cisternae had been opened, the M2 segment of the MCA was exposed. The MA was transected just before the origin of the descending palatine artery branch. After opening the dura over the hole, the MA was passed through the hole to reach the intracranial cavity. The proximal side of the superficial temporal artery graft was anastomosed end-to-end with the MA and the distal side was anastomosed end-to-side with the M2 segment of the MCA. Results. The mean caliber of the MA was 2.4±0.3 mm before the origin of the descending palatine artery branch. The mean caliber of the largest trunk of the M2 segment of the MCA was 2.3±0.3 mm. The average length of the graft was 24±3 mm.

The morphometric analysis of the V2 and V3 segments of the vertebral artery: Normal values on MDCT

A potential hazard in midline posterior fossa craniectomy may be the injury of vertebral artery. Thats why vertebral artery evaluation prior to surgery may prevent dangerous complications. Advancements in multidetector computed tomography (MDCT) have provided detailed demonstration of the vertebral artery at the craniocervical junction and its relationships with atlas and axis. We aimed to define the normal anatomic relationship of the V2 and V3 part of the vertebral artery on MDCT. In total, 33 patients underwent MDCT angiography scan with suspected cranial aneurysm. V2 and V3 segments of vertebral artery were evaluated. Eight measurements (B, C, D, E, G, H, X, and Y line) were taken from MDCT images. For B and C, a line initially passing through the body of axis and spinous process and determining the midline was formed. Then, the vertical distance of vertebral artery from the level of transverse foramen of axis and loop to this midline was measured. For D and G, the vertical distance of vertebral artery to the midline from the upper and lower margin levels of transverse foramen of atlas was measured after a line establishing the midline passing through the anterior and posterior tubercles of atlas was drawn first. For E, transverse diameter of vertebral artery was measured at the loop level of V2 segment. For H, the vertical distance at the point where vertebral artery entered dura in the line passing from the midline of foramen magnum at anterior-posterior plane was measured. For X and Y, two different points of horizontal part of the vertebral artery were determined. One of these two points was the lateral one which was the origin of the horizontal part in the transverse foramen, the other was the intersection point on atlas. Average distances for both sides from transverse foramen of the axis, the loop of axoatlantal part and the lower border of the atlas of the vertebral artery to the midline were 20.97 mm on the right, 22.29 mm on the left; 27.19 mm on the right, 28.34 mm on the left; and 25.75 mm on the right and 27.21 mm on the left, respectively. Average distances for both sides from the upper border of the atlas, and at its penetration through dura were 27.40 mm on the right, 28.94 mm on the left; and 10.90 mm on the right and 10.93 mm on the left, respectively. Distances between spinous process and intersection of vertebral artery with horizontal part were 35.79 mm on the right and 36.63 mm on the left laterally, and 22.27 mm on the right and 22.62 mm on the left medially. MDCT angiography is a powerful test to demonstrate the vasculature of the head and neck. Bony structures and adjacent vessel morphology can be evaluated by this technique. The evaluation of craniocervical region prior to surgery with MDCT may be helpful to avoid intraoperative vascular injuries.

Comparison of two different approches to the pterygomaxillary junction in Le Fort I osteotomy

OBJECTIVE The purpose of this study was to compare the damage before and after down fracture in Le Fort I osteotomies performed with and without the separation of pterygomaxillary junction using curved osteotomes in a cadaver model. STUDY DESIGN The study sample comprised 6 cadavers aged between 55 and 70 years (mean age: 63.8 years). Three cadavers were partially edentulous, 2 cadavers still maintained a full complement of teeth and 1 cadaver was edentulous. Le Fort I osteotomy was performed on all cadavers. Pterygomaxillary osteotomies were only performed on the right sides whereas the left sides were left intact. Subsequently, the maxilla was mobilized by applying digital pressure on the anterior maxillary segment. Computed tomography scans of each specimen were obtained before surgery, after surgery-before down fracture and after down fracture to document secondary fractures. RESULTS Before the down fracture, secondary fractures were found in only 1 specimen (right side), whereas after the down fracture, secondary fractures were found in 5 specimens by CT. After the down fracture, the rate of occurrence of secondary fractures was 62% in the right side and 38% in the left side. CONCLUSION With respect to the results of the present study, the use of osteotomes for pterygomaxillary dysjunction increases the incidence of fractures in maxillary osteotomy. However, the occurrence of almost all fractures subsequent to down fracture suggests the presence of possible bony splits that could not be diagnosed by radiographic examination immediately after maxillary osteotomy may have become apparent or transformed into fractures following down fracture.

A modified technique to bypass the maxillary artery to supraclinoid internal carotid artery by using radial artery graft: an anatomical study

OBJECTIVE This study aims to examine the use of a radial artery graft for bypass of the maxillary artery (MA) to the supraclinoid internal carotid artery (ICA) in treating ICA occlusions. STUDY DESIGN AND SETTING This method was carried out on five adult cadaver sides. The MA was reached 1-2 cm inferior to the crista infratemporalis, following a frontotemporal craniotomy and a zygomatic arch osteotomy. Extradurally 2-3 cm lateral to the foramen rotundum, a hole was drilled in the sphenoid bone with a 4 mm tipped drill. A radial artery graft was passed through the hole to the inside of the dura. Before giving the infraorbital artery branch, the MA was dissected from the surrounding tissue and transected. The proximal end of the graft was anastomosed end-to-end with the MA and the distal end of the graft end-to-side with the supraclinoid ICA. RESULTS The mean calibre of the MA was 2.6 +/- 0.3 mm. The mean calibre of the proximal end of the radial artery graft was 2.5 +/- 0.25 mm and the distal end was 2.35 +/- 0.2 mm. The mean length of the radial artery graft was 4.0 +/- 0.5cm. CONCLUSION This study suggested that the cases with ICA occlusion, which require high blood flow, may be treated as an alternative to current bypass methods requiring long vein grafts.