Azm S. Al-Homoud

SEISMIC HAZARD ASSESSMENT OF UNITED ARAB EMIRATES AND ITS SURROUNDINGS

This paper presents the seismic hazard assessment and seismic zoning of the United Arab Emirates (UAE) and its surroundings based on the probabilistic approach. The area that has been studied lies between 50°E-60°E and 20°N-30°N and spans several Gulf countries. First, the tectonics of the area and its surroundings is reviewed. An updated catalogue, containing both historical and instrumental events is used. Seismic source regions are modelled and relationships between earthquake magnitude and earthquake frequency is established. A modified attenuation relation for Zagros region is adopted. Seismic hazard assessment is then carried out for 20 km interval grid points. Seismic hazard maps of the studied area based on probable Peak Ground Acceleration (PGA) for 10% probability of exceedance for time-spans of 50, 100 and 200 years are shown. A seismic zone map is also shown for a 475-year return period. Although the results of the seismic hazard assessment indicated that UAE has moderate to low seismic hazard levels, nevertheless high seismic activities in the northern part of UAE warrant attention. The northern Emirates region is the most seismically active part of UAE. The PGA on bedrock in this region ranges between 0.22 g for a return period of 475 years to 0.38 g for a return period of 1900 years. This magnitude of PGA, together with amplification from local site effect, can cause structural damage to key structures and lifeline systems.

Modeling uncertainty in stability analysis for design of embankment dams on difficult foundations

Abstract A probabilistic 3-D slope stability analysis model (PTDSSAM) is developed to evaluate the stability of embankment dams and their foundations under conditions of staged construction taking into consideration uncertainty, spatial variabilities and correlations of shear strength parameters, as well as the uncertainties in pore water pressure. The model has the following capabilities: (1) conducting undrained shear strength analysis (USA) and effective stress analysis (ESA) slope stability analysis of staged construction, (2) incorporation of field monitored data of pore water pressure, and (3) incorporation of increase of undrained shear strength with depth, effective stress, and pore water pressure dissipation. The PTDSSAM model is incorporated in a computer program that can analyze slopes located in multilayered deposits, considering the total slope width. The main outputs of the program are the geometric parameters of the most critical sliding surface (i.e., center of rotation/radius of rotation and critical width of failure), mean 2-D safety factor, mean 3-D safety factor, squared coefficient of variation of resisting moment, and the probability of slope failure. The program is applied to a case study, Karameh dam in Jordan. Monitored data of induced pore water pressure in the dam embankment and soft foundation were gathered during dam construction. The stability of Karameh dam embankment and foundation was evaluated during staged construction using deterministic and probabilistic analysis. Foundation stability was evaluated based on the monitored data of pore water pressure. The study showed that the mean values of the corrective factors which account for the discrepancies between the in situ and laboratory-measured values of soil properties and for the modeling errors have significant influence on the 2-D safety factor, 3-D safety factor, slope probability of failure, and on the expected failure width. The degree of spatial correlation associated with shear strength parameters within a soil deposit also influences the probability of slope failure and the expected failure width. This correlation is quantified by scale of fluctuation. It is found that a larger scale of fluctuation gives an increase in the probability of slope failure and a reduction in the critical failure width.

A reliability based expert system for assessment and mitigation of landslides hazard under seismic loading

Different models were developed for evaluating the probabilistic three-dimensional (3-D) stability analysis of earth slopes and embankments under earthquake loading using both the safety factor and the displacement criteria of slope failure.The probabilistic models evaluate the probability of failure under seismic loading considering the different sources of uncertainties involved in the problem. The models also take into consideration the spatial variabilities and correlations of soil properties. The developed models are incorporated in a computer program PTDDSSA.These analysis/design procedures are incorporated within a code named SARETL developed in this study for stability analysis and remediation of earthquake triggered landslides. In addition to the dynamic inertia forces, the system takes into consideration local site effects.The code is capable of assessing the landslide hazard affecting major transportation routes in the event of earthquakes and preparing earthquake induced landslide hazard maps (i.e., maps showing expected displacements and probability of slope/embankments failure) for different earthquake magnitudes and environmental conditions. It can also beused for proposing a mitigation strategy against landslides.

Seismic reliability analysis of earth slopes under short term stability conditions

Different models were developed for evaluating the probabilistic three-dimensional (3-D) stability analysis of earth slopes and embankments under earthquake loading. The 3-D slope stability model assumed is that of a simple cylindrical failure surface. The probabilistic models evaluate the probability of failure under seismic loading considering the randomness of earthquake occurrence, and earthquake induced acceleration and uncertainties stemming from the discrepancies between laboratory-measured and in-situ values of shear strength parameters. The models also takes into consideration the spatial variabilities and correlations of soil properties. The probabilistic analysis and design approach is capable of obtaining the 2-D and 3-D static and dynamic safety factors, the probability of slope failure, the earthquake induced acceleration coefficient, the yield acceleration coefficient, the earthquake induced displacement, and the probability of allowable displacement exceedance taking into account the local site effect. The approach is applied to a well known landslide case: Congress Street Landslide in Chicago. A sensitivity analysis was conducted on the different parameters involved in the models by applying those models to the Congress Street landslide considering different levels of seismic hazard. Also, a sensitivity analysis was carried out to study the sensitivity of computed results to input parameters of undrained shear strength, and corrective factors. A comparison was made between the different models of failure. The parametric study revealed that the hypocentral distance and earthquake magnitude have major influence on the earthquake induced displacement, probability of failure and dynamic 2-D and 3-D safety factors.

Comparison between measured and predicted values of axial end bearing and skin capacity of piles bored in cohesionless soils in the Arabian Gulf Region

The axial base and skin capacities of piles bored in cohesion less soils are often estimated using empirical, semi-empirical and theoretical methods. The aim of this paper is to assess the applicability and evaluate the accuracy of different predictions methods available in the literature, via comparison with data from 43 field pile load tests conducted on shafts drilled in the region of the United Arab Emirates. Janbus theoretical method (1989) with the parameter (ψ = 75°) and Vesic′s theoretical method (1975) yielded accurate predictions for the base resistances. Burland′s approach (1973) overpredicts the skin capacities with an average predicted-to-estimated ratio (qp/qe) of three times greater than the unity while using values of the coefficient of earth pressure (k = 05 ko) and the angle of soil-pile friction (δ = 23Φ).