B. Bayarri

Higher intrinsic photocatalytic efficiency of 2,4,6-triphenylpyrylium-based photocatalysts compared to TiO2 P-25 for the degradation of 2,4-dichlorophenol using solar simulated light

The photocatalytic efficiency of two 2,4,6-triphenylpyrylium (TP(+)) based photocatalysts (supported on silica or incorporated inside zeolite Beta, 3wt%) for the degradation of 2,4-dichlorophenol (DCP) in aqueous media has been compared with TiO(2) (Degussa P-25). It was found that the efficiency of the degradation depends on the photocatalytic setup, recirculation through a tubular reactor being highly unfavorable for the TP(+)-based photocatalysts due to the deposition of the silica or zeolite particles. In contrast, high efficiency in DCP disappearance (up to 87%) and in the total organic content decrease (up to 62%) were obtained using a discontinuous batch reactor in which the TP(+) photocatalysts were uniformly suspended. Kinetic studies were also made and DCP degradation follows a first order kinetics. The obtained kinetic constants when corrected to account for the influence of the fraction of light absorbed and the amount of active sites shows that the intrinsic activity of TP(+) adsorbed on silica or incorporated inside zeolite Beta was over one order of magnitude higher than TiO(2) activity.

A Comparison of the Environmental Impact of Different AOPs: Risk Indexes

Today, environmental impact associated with pollution treatment is a matter of great concern. A method is proposed for evaluating environmental risk associated with Advanced Oxidation Processes (AOPs) applied to wastewater treatment. The method is based on the type of pollution (wastewater, solids, air or soil) and on materials and energy consumption. An Environmental Risk Index (E), constructed from numerical criteria provided, is presented for environmental comparison of processes and/or operations. The Operation Environmental Risk Index (EOi) for each of the unit operations involved in the process and the Aspects Environmental Risk Index (EAj) for process conditions were also estimated. Relative indexes were calculated to evaluate the risk of each operation (E/NOP) or aspect (E/NAS) involved in the process, and the percentage of the maximum achievable for each operation and aspect was found. A practical application of the method is presented for two AOPs: photo-Fenton and heterogeneous photocatalysis with suspended TiO2 in Solarbox. The results report the environmental risks associated with each process, so that AOPs tested and the operations involved with them can be compared.