B. C. Richards

Scanning a photonic crystal slab nanocavity by condensation of xenon

Allowing xenon or nitrogen gas to condense onto a photonic crystal slab nanocavity maintained at 10–20 K results in shifts of the nanocavity mode wavelength by as much as 5 nm (~=4 meV). This occurs in spite of the fact that the mode defect is achieved by omitting three holes to form the spacer. This technique should be useful in changing the detuning between a single quantum dot transition and the nanocavity mode for cavity quantum electrodynamics experiments, such as mapping out a strong coupling anticrossing curve. Compared with temperature scanning, it has a much larger scan range and avoids phonon broadening.

Excitonic polaritons in Fibonacci quasicrystals.

The fabrication and characterization of light-emitting one-dimensional photonic quasicrystals based on excitonic resonances is reported. The structures consist of high-quality GaAs/AlGaAs quantum wells grown by molecular-beam epitaxy with wavelength-scale spacings satisfying a Fibonacci sequence. The polaritonic (resonant light-matter coupling) effects and light emission originate from the quantum well excitonic resonances. Measured reflectivity spectra as a function of detuning between emission and Bragg wavelength are in good agreement with excitonic polariton theory. Photoluminescence experiments show that active photonic quasicrystals, unlike photonic crystals, can be good light emitters: While their long-range order results in a stopband similar to that of photonic crystals, the lack of periodicity results in strong emission.

One dimensional resonant Fibonacci quasicrystals: noncanonical linear and canonical nonlinear effects

A detailed experimental and theoretical study of the linear and nonlinear optical properties of different Fibonacci-spaced multiple-quantum-well structures is presented. Systematic numerical studies are performed for different average spacing and geometrical arrangement of the quantum wells. Measurements of the linear and nonlinear (carrier density dependent) reflectivity are shown to be in good agreement with the computational results. As the pump pulse energy increases, the excitation-induced dephasing broadens the exciton resonances resulting in a disappearance of sharp features and reduction in peak reflectivity.

Modelling and fabrication of GaAs photonic-crystal cavities for cavity quantum electrodynamics

In this paper, we present recent progress in the growth, modelling, fabrication and characterization of gallium arsenide (GaAs) two-dimensional (2D) photonic-crystal slab cavities with embedded indium arsenide (InAs) quantum dots (QDs) that are designed for cavity quantum electrodynamics (cQED) experiments. Photonic-crystal modelling and device fabrication are discussed, followed by a detailed discussion of different failure modes that lead to photon loss. It is found that, along with errors introduced during fabrication, other significant factors such as the presence of a bottom substrate and cavity axis orientation with respect to the crystal axis, can influence the cavity quality factor (Q). A useful diagnostic tool in the form of contour finite-difference time domain (FDTD) is employed to analyse device performance.

Effect of atomic layer deposition on the quality factor of silicon nanobeam cavities

In this work we study the effect of thin-film deposition on the quality factor (Q) of silicon nanobeam cavities. We observe an average increase in the Q of 38±31% in one sample and investigate the dependence of this increase on the initial nanobeam hole sizes. We note that this process can be used to modify cavities that have larger than optimal hole sizes following fabrication. Additionally, the technique allows the tuning of the cavity mode wavelength and the incorporation of new materials, without significantly degrading Q.

Characterization of 1D Photonic Crystal Nanobeam Cavities Using Curved Microfiber

We investigate high-Q, small mode volume photonic crystal nanobeam cavities using a curved, tapered optical microfiber loop. The strength of the coupling between the cavity and the microfiber loop is shown to depend on the contact position on the nanobeam, angle between the nanobeam and the microfiber, and polarization of the light in the fiber. The results are compared to a resonant scattering measurement.

Attempts to grow optically coupled Fibonacci-spaced InGaAs/GaAs quantum wells result in surface gratings

An instability in the growth of nonperiodic InGaAs/GaAs multiple quantum well samples, ordinarily of high-quality when grown with equal periods of order of half the wavelength of light in the material, leads to a dramatic microscopic, self-organized surface grating. This effect was discovered while growing quantum wells with two unequal barrier lengths arranged in a Fibonacci sequence to form an optical quasicrystal. A laser beam incident normal to the surface of the sample is diffracted into a propeller-shaped pattern. The sample surface has a distinctly cloudy appearance when viewed along one crystal axis but is mirror-like when the sample is rotated 90 degrees. The instability results in a five-fold increase in the absorption linewidth of the heavy-hole exciton transition. Atomic force microscopy, transmission electron microscopy, and scanning electron microscopy were used to study the samples.

Polarization conservation and dephasing in InAs quantum dot ensembles

We present time-resolved photoluminescence measurements performed on an ensemble of InAs quantum dots with density of 1011 dots/cm2 and ground state transition energies centered at 1.216 eV. The wavelength of the 100fs excitation pulse was tuned through the ground (excited) state transitions, resulting in resonant (optical phonon assisted) photoluminescence (PL). The PL was detected with its polarization both parallel with and perpendicular to the excitation polarization (along one of the crystals cleave axes). The decay of the PL was time-resolved with a streak camera in the interval 1.5 - 3ns to avoid scattered laser light. A strong polarization dependence was observed. Considerable amount of the resonant fluorescence signal and even of the non-resonant PL signatures remained linearly polarized on a nanosecond time scale. A phenomenological rate equation analysis is made.

Quantum dot photonic crystal nanocavities: Transition from weak to strong coupling and nonlinear emissions

Photonic crystal slab nanocavities containing one layer of quantum dots have exhibited: strong coupling to a single quantum dot; tuning by condensation of xenon gas; linewidth broadening due to ensemble dot absorption; gain and lasing.

Strong-coupling and nonlinear emission from a quantum-dot photonic-crystal-slab nanocavity

An InAs quantum dot in a photonic crystal nanocavity exhibits vacuum Rabi splitting (strong coupling); a clear anti-crossing is seen between the quantum dot transition and the nanocavity mode as the temperature is scanned.