Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where B. Jáger is active.

Publication


Featured researches published by B. Jáger.


PLOS ONE | 2018

Comparison of spinal curvature parameters as determined by the ZEBRIS spine examination method and the Cobb method in children with scoliosis

Mária Takács; Zsanett Orlovits; B. Jáger; Rita M. Kiss

Background and purpose The most common and gold standard method to diagnose and follow-up on scoliosis treatment is to capture biplanar X-ray images and then use these to determine the sagittal frontal spinal curvature angles by the Cobb method. Reducing exposure to radiation is an important aspect for consideration, especially regarding children. The ZEBRIS spinal examination method is an external, non-invasive measurement method that uses an ultrasound-based motion analysis system. The aim of this study is to compare angle values of patients with adolescent idiopathic scoliosis (AIS) determined by the ZEBRIS spine examination method with the angle values defined by the gold standard Cobb method on biplanar X-ray images. Methods Subjects included 19 children with AIS (mean age 14.5±2.1 years, range 8–16 years, frontal plane thoracic Cobb angle 19.95±10.23°, thoracolumbar/lumbar angle 16.57±10.23°). The thoracic kyphosis and lumbar lordosis in the sagittal plane and the thoracic and lumbar scoliosis values were calculated by the Cobb method on biplanar X-ray images. The sagittal frontal spinal curvature angles were calculated from the position of the processus spinosus of 19 vertebrae, as determined by the ZEBRIS spine examination method. The validity of the ZEBRIS spine examination method was evaluated with Bland-Altman analyses between the sagittal and frontal spinal curvature parameters calculated from data determined by the ZEBRIS spine examination method and data obtained by the Cobb method on the X-ray images. Results and discussion Thoracic spinal curvature angles in sagittal and in frontal planes can be measured with sufficient accuracy. The slopes of the linear regression lines for thoracic kyphosis (TK) and thoracic scoliosis (TSC) are close to one (1.00 and 0.79 respectively), and the intercept values are below 5 degrees. The correlation between the TK and TSC values determined by the two methods is significant (p = 0.000) and excellent (rTK = 0.95, rTSC = 0.85). The differences are in the limit of agreement. The lumbar lordosis (LL) in the sagittal plane shows a very good correlation (rLL = 0.76); however the differences between the angles determined by the two methods are out of the limit of agreement in patients with major lumbar lordosis (LL≥50°). The thoracolumbar/lumbar spinal curvature angles in the frontal plane determined by ZEBRIS spine examination were underestimated at curvatures larger than 15°, mainly due to the rotational and pathological deformities of the scoliotic vertebrae. However, the correlation between lumbar scoliosis (LSC) values determined by the two methods is significant (p = 0.000) and excellent (rLSC = 0.84), the slopes are below one (0.71), the intercept values are below 5 degrees, and the differences between the angles determined by the two methods are within the limits of agreement. We could conclude that ZEBRIS spinal examination is a valid and reliable method for determination of sagittal and frontal curvatures during the treatment of patients with scoliosis. However, it cannot replace the biplanar X-ray examination for the visualization of spinal curvatures in the sagittal and frontal planes and the rotation of vertebral bodies during the diagnosis and annual evaluation of the progression.


1st European Biomedical Engineering Conference for Young Investigators, ENCY2015 | 2015

Mathematical description of spinal curvature using the results of in-vivo measurement systems

B. Jáger; T. Kristóf; Rita M. Kiss

The oldest and most accurate way of determining the shape of the spine is to make X-rays from two different angles, which can be performed once a year even in serious diseases, due to its high radiation exposure. However, in case of a conservative treatment of spinal disorders, continuous monitoring is necessary, thus different in-vivo methods are being developed, like optical (Moire method), electromagnetic (SpinalTouch) and ultrasound based (Zebris) measuring devices, which can record the shape of spine without radiation exposure. The spinal curvature by the equation of a curve fitted on measured points of spine and by the complementary angles characterizing the spinal curvatures (thoracic and lumbar) derived from these aforementioned curves. Zebris and SpinalTouch measurements of 73 healthy patients -, aged between 10 and 15 - were the basis of the comparison. According to the results, the characterizing angles derived from the curves shows a high correlation (0.86-0.90) with the angles calculated with the traditional method, thus the application of these measurement methods and processing procedures can be reasonable.


Journal of Constructional Steel Research | 2012

Stress distribution in the flanges of girders with corrugated webs

Balázs Kövesdi; B. Jáger; László Dunai


Journal of Constructional Steel Research | 2016

Bending and shear interaction behavior of girders with trapezoidally corrugated webs

Balázs Kövesdi; B. Jáger; László Dunai


Journal of Constructional Steel Research | 2017

I-girders with unstiffened slender webs subjected by bending and shear interaction

B. Jáger; Balázs Kövesdi; László Dunai


Thin-walled Structures | 2015

Girders with trapezoidally corrugated webs subjected by combination of bending, shear and path loading

B. Jáger; László Dunai; Balázs Kövesdi


Engineering Structures | 2017

Experimental Investigation of the M-V-F Interaction Behavior of Girders with Trapezoidally Corrugated Web

B. Jáger; László Dunai; Balázs Kövesdi


Thin-walled Structures | 2017

Flange buckling behavior of girders with corrugated web Part II: Numerical study and design method development

B. Jáger; László Dunai; Balázs Kövesdi


World Academy of Science, Engineering and Technology, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering | 2018

Lateral Torsional Buckling Resistance of Trapezoidally Corrugated Web Girders

Annamária Käferné Rácz; B. Jáger; Balázs Kövesdi; László Dunai


Proceedings 12th international conference on Advances in Steel-Concrete Composite Structures - ASCCS 2018 | 2018

Push-out tests on embedded shear connections for hybrid girders with trapezoidal web

B. Jáger; G Németh; Nauzika Kovács; Balázs Kövesdi; Mansour Kachichian

Collaboration


Dive into the B. Jáger's collaboration.

Top Co-Authors

Avatar

Balázs Kövesdi

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

László Dunai

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

Rita M. Kiss

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

G Németh

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

Mansour Kachichian

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

Nauzika Kovács

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

T. Kristóf

Budapest University of Technology and Economics

View shared research outputs
Top Co-Authors

Avatar

Zsanett Orlovits

Budapest University of Technology and Economics

View shared research outputs
Researchain Logo
Decentralizing Knowledge