B. Jeya Ganesh

Differential scanning calorimetry study of diffusional and martensitic phase transformations in some 9 wt-%Cr low carbon ferritic steels

Abstract The results of a comprehensive characterisation study of different phase transformations that take place upon heating and cooling in some low carbon, 9 wt-%Cr steels with varying concentrations of microalloying additions are presented in this paper. The steels investigated include: standard 9Cr–1Mo grade, V and Nb added modified 9Cr variety, controlled silicon added versions of plain 9Cr variety, (Ni+Mn) content controlled modified 9Cr welding consumables and one composition of W, Ta added reduced activation steel. The various on-heating diffusional phase changes up to the melting range and subsequent rapid cooling induced martensitic transformations are investigated in a controlled manner using differential scanning calorimetry under different heating and cooling rates, in the range 1–100 K min−1. In addition to the accurate determination of Ac1, Ac3, M23C6, MX carbide dissolution and δ-ferrite formation temperatures upon heating, the melting range and the associated fusion enthalpy have also been established for these steels. The effect of prolonged thermal aging at temperatures of 823–873 K on austenite formation characteristics has also been investigated for standard and modified 9Cr–1Mo steels. The critical cooling rate for the formation of martensite on cooling from single phase austenite region is estimated to be about 4–5 K min−1 for all 9Cr steels investigated in this study. The effect of holding at 1273 K in the austenite region on martensite start temperature Ms, has also been evaluated as a part of this study. The experimental results are discussed in the light of the prevailing understanding of the physical metallurgy of high chromium low carbon steels.

Effect of Thermal Aging on the Transformation Temperatures and Specific Heat Characteristics of 9Cr-1Mo Ferritic Steel

The effect of thermal ageing on the heat capacity and transformation behaviour of behaviour of 9Cr-1Mo-0.1C (wt.%) ferritic / martensitic steel has been studied using differential scanning calorimetry (DSC) in the temperature range 473 to 1273 K. It is found that a-ferrite + carbide ® g-austenite phase transformation temperature is only mildly sensitive to microstructural details; but the enthalpy change associated with this phase transformation and especially, the change in specific heat around the transformation regime are found to be dependent on the starting microstructure generated by thermal ageing treatment. Prolonged ageing for about 500 to 5000 hours in the temperature range 823 to 923 K contributed to a decrease in heat capacity, as compared to the normalised and tempered sample. The martensite microstructure is found to possess the lowest room temperature CP among different microstructures.