Bahareh Saberi

Water Sorption Isotherm of Pea Starch Edible Films and Prediction Models

The moisture sorption isotherm of pea starch films prepared with various glycerol contents as plasticizer was investigated at different storage relative humidities (11%–96% RH) and at 5 ± 1, 15 ± 1, 25 ± 1 and 40 ± 1 °C by using gravimetric method. The results showed that the equilibrium moisture content of all films increased substantially above aw = 0.6. Films plasticized with glycerol, under all temperatures and RH conditions (11%–96%), adsorbed more moisture resulting in higher equilibrium moisture contents. Reduction of the temperature enhanced the equilibrium moisture content and monolayer water of the films. The obtained experimental data were fitted to different models including two-parameter equations (Oswin, Henderson, Brunauer–Emmitt–Teller (BET), Flory–Huggins, and Iglesias–Chirife), three-parameter equations Guggenhiem–Anderson–deBoer (GAB), Ferro–Fontan, and Lewicki) and a four-parameter equation (Peleg). The three-parameter Lewicki model was found to be the best-fitted model for representing the experimental data within the studied temperatures and whole range of relative humidities (11%–98%). Addition of glycerol increased the net isosteric heat of moisture sorption of pea starch film. The results provide important information with estimating of stability and functional characteristics of the films in various environments.

Characterization of rice starch-ι-carrageenan biodegradable edible film. Effect of stearic acid on the film properties.

The main aim of this study was to develop rice starch (RS), ι-carrageenan (ι-car) based film. Different formulations of RS (1-4%, w/w), ι-car (0.5-2%, w/w) was blended with stearic acid (SA; 0.3-0.9%, w/w) and glycerol (1%, w/w) as a plasticizer. The effect of film ingredients on the thickness, water vapour permeability (WVP), film solubility (FS), moisture content (MC), colour, film opacity (FO), tensile strength (TS), elongation-at-break (EAB) of film was examined. Interactions and miscibility of partaking components was studied by using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Hydrocolloid suspension solution of mix polysaccharides imparted a significant impact (p<0.05) on the important attributes of resulting edible film. TS and EAB of film were improved significantly (p<0.05) when ι-car was increased in the film matrix. Formulation F1 comprising 2% ι-car, 2% RS, 0.3% SA, Gly 30% w/w and 0.2% surfactant (tween®20) provided film with good physical, mechanical and barrier properties. FT-IR and XRD results reveal that molecular interactions between RS-ι-car have a great impact on the film properties confining the compatibility and miscibility of mixed polysaccharide. Results of the study offers new biodegradable formulation for application on fruit and vegetables.

Physical and mechanical properties of a new edible film made of pea starch and guar gum as affected by glycols, sugars and polyols

The influence of different plasticizers (glycols, sugars and polyols) on the moisture sorption, mechanical, physical, optical, and microstructure characteristics of pea starch-guar gum (PSGG) film was studied. All plasticizers formed homogeneous, transparent, and smooth films, while PEG-400 did not produce film with suitable characteristics. Fourier transform infrared (FTIR) spectroscopy results indicated some interaction between plasticizers and the polymers. Scanning electron microscopy (SEM) observations of the films presented surfaces without cracks, breaks, or openings which were indicator of the miscibility and compatibility of employed plasticizers with PSGG films. The results showed that the films containing plasticizers with higher functional groups had lower equilibrium moisture content at aw <0.4. In general, a reduction in tensile strength and Youngs modulus and an increase in elongation at break were detected when molecular weight of plasticizers and relative humidity increased in all film formulations. Films plasticized with monosaccharide showed similar mechanical properties to those with sorbitol, but lower solubility and water vapour permeability (WVP), higher transparency and moisture content than the sorbitol-plasticized films. The most noticeable plasticization effect was exerted by following order: glycerol > EG > PG > xylitol > fructose > sorbitol > mannitol > galactose > glucose > sucrose > maltitol.

Use of response surface methodology (RSM) to optimize pea starch-chitosan novel edible film formulation

The aim of this study was to develop an optimal formulation for preparation of edible films from chitosan, pea starch and glycerol using response surface methodology. Three independent variables were assigned comprising chitosan (1–2%), pea starch (0.5–1.5%) and glycerol (0.5–1%) to design an empirical model best fit in physical, mechanical and barrier attributes. Impacts of independent variables on thickness, moisture content, solubility, tensile strength, elastic modulus, elongation at break and water vapor permeability of films were evaluated. All the parameters were found to have significant effects on physical and mechanical properties of film. The optimal formulation for preparation of edible film from chitosan, pea starch and glycerol was 1% chitosan, 1.5% pea starch and 0.5% glycerol. Edible films with good physical and mechanical properties can be prepared with this formulation and thus this formulation can be further applied for testing on coating for fruit and vegetables.

Postharvest Application of Biopolymer-Based Edible Coatings to Improve the Quality of Fresh Horticultural Produce

Fresh fruit and vegetables are essential part of the human diet and with increasing growth in the world population and globalization of the supply chain, there is high consumer demand for fresh high quality fruit and vegetables with satisfactory shelf-life. Fruit and vegetables are living perishable commodities and maintaining their eating quality requires delaying and slowing the loss of quality and microbial spoilage in the supply chain. To actively manage produce quality, it is essential to understand the physiology and pathology associated with the storage and handling of fresh fruit and vegetables, for example changes in internal gas and volatiles composition within the produce affect the respiration and senescence rates of stored produce and hence final eating quality. Biopolymers including polysaccharides, proteins and lipids used alone or in combination, have been widely studied as edible coatings for fresh produce due to their widespread availability, ability to control gaseous exchange and to delay senescence, as well as their capability as a medium to carry various additives which can assist with the maintenance of produce quality. This chapter describes and discusses on selected biopolymer based edible coatings and their various applications on fresh fruit and vegetables to extend their shelf life and to improve final eating and nutritional quality through the supply chain.