Balaji Sambandam

Co3V2O8 Sponge Network Morphology Derived from Metal–Organic Framework as an Excellent Lithium Storage Anode Material

Metal-organic framework (MOF)-based synthesis of battery electrodes has presntly become a topic of significant research interest. Considering the complications to prepare Co3V2O8 due to the criticality of its stoichiometric composition, we report on a simple MOF-based solvothermal synthesis of Co3V2O8 for use as potential anodes for lithium battery applications. Characterizations by X-ray diffraction, X-ray photoelectron spectroscopy, high resolution electron microscopy, and porous studies revealed that the phase pure Co3V2O8 nanoparticles are interconnected to form a sponge-like morphology with porous properties. Electrochemical measurements exposed the excellent lithium storage (∼1000 mAh g(-1) at 200 mA g(-1)) and retention properties (501 mAh g(-1) at 1000 mA g(-1) after 700 cycles) of the prepared Co3V2O8 electrode. A notable rate performance of 430 mAh g(-1) at 3200 mA g(-1) was also observed, and ex situ investigations confirmed the morphological and structural stability of this material. These results validate that the unique nanostructured morphology arising from the use of the ordered array of MOF networks is favorable for improving the cyclability and rate capability in battery electrodes. The synthetic strategy presented herein may provide solutions to develop phase pure mixed metal oxides for high-performance electrodes for useful energy storage applications.

Metal–organic framework-combustion: a new, cost-effective and one-pot technique to produce a porous Co3V2O8 microsphere anode for high energy lithium ion batteries

A porous, cobalt vanadate (Co3V2O8) microsphere electrode with a cubic crystalline phase is synthesized using a novel one-pot synthesis with a metal–organic framework (MOF) based combustion strategy for use in high energy lithium ion batteries. The simple synthesis presented in this paper facilitates the evolution of a porous secondary microsphere morphology from primary aggregates of 20–50 nm particle sizes. This unique morphology appears to be derived from the Co-V–MOF intermediate network formed in situ during synthesis. The Co3V2O8 microsphere electrode displayed excellent cyclabilities at high current densities. In particular, a specific discharge capacity of 940 mA h g−1 after 100 cycles at 1 A g−1 and the highest known capacity of 650 mA h g−1 after 400 cycles at 5 A g−1 are sustained by the prepared microsphere electrode. The enhanced rate performance is mainly attributed to the unique morphology in addition to the nanoscale dimension of the electrode. Ex situ investigations confirmed that the high structural stability of the electrode facilitates minimum volume change during the electrochemical reaction under high discharge/charge rates. Furthermore, the present one-pot synthetic protocol appears to be promising for the production of phase pure, mixed metal oxide nanostructured electrodes for a wide range of applications including energy storage.

Facile green synthesis of a Co3V2O8 nanoparticle electrode for high energy lithium-ion battery applications

In the present study, a metal-organic framework (MOF) derived from a facile water-assisted green precipitation technique is employed to synthesize phase-pure cobalt vanadate (Co3V2O8, CVO) anode for lithium-ion battery (LIB) application. The material obtained by this eco-friendly method is systematically characterized using various techniques such as powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and N2 adsorption-desorption measurements. By using as an anode, an initial discharge capacity of 1640mAhg-1 and a reversible capacity of 1194mAhg-1 are obtained at the applied current densities after the 240th cycle (2Ag-1 for 200 cycles followed by 0.2Ag-1 for 40 cycles). Moreover, a reversible capacity as high as 962mAhg-1 is retained at high current densities even after 240 cycles (4Ag-1 for 200 cycles followed by 2Ag-1 for 40 cycles), revealing the long life stability of the electrode. Significantly, CVO anode composed of fine nanoparticles (NPs) registered a substantial rate performance and reversible specific capacities of 275, 390, 543 and 699mAhg-1 at high reversibly altered current densities of 10, 5, 2, and 1Ag-1, respectively.

A sponge network-shaped Mn3O4/C anode derived from a simple, one-pot metal organic framework-combustion technique for improved lithium ion storage

A sponge network-shaped Mn3O4 material is synthesized by a one-pot metal organic framework-combustion (MOF-C) technique for Li-ion battery anodes with improved performance. The as-synthesized ordered sponge network morphology is characterized by various techniques, such as powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and N2 adsorption–desorption measurements. The one-pot synthesized Mn3O4 material shows a uniform amorphous graphitic carbon coating with few-nanometer thickness on the surface. This anode shows an initial discharge capacity of 1186 mA h g−1 and a reversible capacity of 768 mA h g−1 is maintained at an applied current density of 200 mA g−1 after 100 cycles. Sustained reversible capacities of 651 and 592 mA h g−1 are measured for the other two different current densities of 500 and 700 mA g−1, respectively, after 120 cycles, demonstrating the high stability of the anode. This unique morphology appears to contribute to the significantly high rate performance, as observed from the retained reversible capacity of 155 mA h g−1 at a very high current density of 10 000 mA g−1, which is maintained for the next two subsequent sequences with a notable recovered capacity of 700 mA h g−1 for an intermediate current density of 400 mA g−1 after 175 cycles.

Na2V6O16·3H2O Barnesite Nanorod: An Open Door to Display a Stable and High Energy for Aqueous Rechargeable Zn-Ion Batteries as Cathodes

Owing to their safety and low cost, aqueous rechargeable Zn-ion batteries (ARZIBs) are currently more feasible for grid-scale applications, as compared to their alkali counterparts such as lithium- and sodium-ion batteries (LIBs and SIBs), for both aqueous and nonaqueous systems. However, the materials used in ARZIBs have a poor rate capability and inadequate cycle lifespan, serving as a major handicap for long-term storage applications. Here, we report vanadium-based Na2V6O16·3H2O nanorods employed as a positive electrode for ARZIBs, which display superior electrochemical Zn storage properties. A reversible Zn2+-ion (de)intercalation reaction describing the storage mechanism is revealed using the in situ synchrotron X-ray diffraction technique. This cathode material delivers a very high rate capability and high capacity retention of more than 80% over 1000 cycles, at a current rate of 40C (1C = 361 mA g-1). The battery offers a specific energy of 90 W h kg-1 at a specific power of 15.8 KW kg-1, enlightening the material advantages for an eco-friendly atmosphere.

Aqueous rechargeable Zn-ion batteries: an imperishable and high-energy Zn2V2O7 nanowire cathode through intercalation regulation

The use of transition-metal vanadium oxides (TMVOs) for the production of safe and low-cost aqueous rechargeable zinc-ion batteries (ARZIBs) has not been fully explored in detail so far. The electrochemistry involved in multistep Zn2+ insertion/de-insertion induced by vanadium reduction/oxidation in layered α-Zn2V2O7 upon cycling has been interpreted. Layered α-Zn2V2O7 exhibits an excellent specific energy of 166 W h kg−1 and a high capacity retention of 85% after 1000 cycles at an ultra-high current drain of 4000 mA g−1.

K2V6O16·2.7H2O nanorod cathode: an advanced intercalation system for high energy aqueous rechargeable Zn-ion batteries

1D nanorods of the layered material K2V6O16·2.7H2O (KVO) are implemented for the first time as cathode materials in secondary aqueous rechargeable Zn-ion batteries (ARZIBs) and exhibit excellent electrochemical Zn storage properties. This cathode material delivers a reversible capacity of 296 mA h g−1 over 100 cycles. At current densities of 1000, 3000, and 5000 mA g−1 for 700 cycles, the electrode displays reversible capacities of 223, 177, and 138 mA h g−1, for approximately 170, 300, and 230 cycles, respectively. In addition to these properties, it withstands over 500 cycles at an applied current density of 6000 mA g−1 with nearly 82% capacity retention. The battery offers a specific energy of 128 Wh kg−1 at a specific power of 5760 W kg−1, revealing the advantages of the material in an eco-friendly atmosphere.