Balendra Pratap Singh

Assessment of the quality of life in maxillectomy patients: A longitudinal study

PURPOSE To longitudinally assess the quality of life in maxillectomy patients rehabilitated with obturator prosthesis. MATERIALS AND METHODS Thirty-six subjects were enrolled in the span of 16 months, out of which six were dropouts. Subjects (age group 20-60 years) with maxillary defects, irrespective of the cause, planned for definite obturator prosthesis, were recruited. The Hindi version of European Organization for Research and Treatment of Cancer, Head and Neck version 1 of Quality of Life Questionnaire was used before surgical intervention and one month after definitive obturator. Questionnaire includes 35 questions related to the patients physical health, well being, psychological status, social relation and environmental conditions. The data were processed with statistical package for social science (SPSS). Probability level of P<.05 was considered statistically significant. RESULTS The quality of life after rehabilitation with obturator prosthesis was 81.48% (±13.64) on average. On item-level, maximum mean scores were obtained for items problem with teeth (1.87 ± 0.94), pain in mouth (1.80 ± 0.92), trouble in eating (1.70 ± 0.88), trouble in talking to other people (1.60 ± 1.22), problems in swallowing solid food (1.57 ± 1.22) and bothering appearance (1.53 ± 1.04); while minimum scores were obtained for the items coughing (1.17 ± 0.38), hoarseness of voice (1.17 ± 0.53), painful throat (1.13 ± 0.43), trouble in having social contacts with friends (1.10 ± 0.40) and trouble having physical contacts with family or friends (1.10 ± 0.31). CONCLUSION Obturator prosthesis is a highly positive and non-invasive approach to improve the quality of life of patients with maxillectomy defects.

Relationship between bone turnover biomarkers, mandibular bone mineral density, and systemic skeletal bone mineral density in premenopausal and postmenopausal Indian women.

ObjectivePostmenopausal osteoporosis is one of the most common metabolic bone disorders. Osteoporosis is reported to cause bone loss in the alveolar processes of maxilla and mandible, which provide bony framework for tooth anchorage. However, the association between systemic osteoporosis and oral health remains controversial. Available evidence suggests that Indian women have lower peak bone mass than their Western/other Asian counterparts. The present study evaluated the relationship between mandibular bone mineral density (mBMD), systemic skeletal BMD, and bone metabolism in premenopausal and postmenopausal Indian women. MethodsOne hundred twenty-four premenopausal and 247 postmenopausal healthy women were included in the study. The BMD of the body of mandible, radius ultradistal, total hip, femur neck, and lateral spine were measured using dual-energy x-ray absorptiometry. Serum and urine biomarkers were determined using commercial kits. ResultsUnivariate regression analysis followed by stepwise multivariate regression analysis to obtain the best fit model demonstrated the BMD of radius ultradistal, serum inorganic phosphorus, estradiol, and sex hormone–binding globulin as significant predictors of mBMD in premenopausal women. The BMD of femur neck, serum ionized calcium, bone-specific alkaline phosphatase, osteocalcin, and urine total pyridinoline were significantly associated with mBMD in postmenopausal women. The significant association between mBMD and number of teeth present was observed in the whole group of premenopausal and postmenopausal women. ConclusionsVaried predictors of mBMD were observed in premenopausal and postmenopausal women. The results suggest that the screening for these biomarkers and serum ionized calcium should be useful (1) to assess the status of mBMD particularly in women requiring surgical dental intervention that include bone manipulation and (2) for early detection and management of women with the risk of developing osteoporosis.

The effect of osteoporosis on residual ridge resorption and masticatory performance in denture wearers

AIM To compare masticatory performance, masticatory efficiency and residual ridge resorption (RRR) in osteoporotic and non-osteoporotic edentulous subjects after rehabilitation with complete dentures. METHOD Thirty subjects fulfilling the inclusion criteria were enrolled from the patients visiting the Department of Prosthodontics for complete denture fabrication. Two groups consisting of control subjects (group I; N = 15) and osteoporotic subjects (group II; N = 15) were formed. Complete dentures satisfying certain criteria were fabricated for both groups. Masticatory performance and efficiency were measured 6 months after denture insertion. Areal measurements were taken on lateral cephalograms before and 6 months after denture fabrication. The data were then computed to analyse differences between groups I and II using SPSS statistical software version 15.0. RESULTS Six months after denture fabrication, the masticatory performance and efficiency were significantly higher (p < 0.001) for group I, with a significant decrease in maxillary and mandibular sagittal area seen in both groups. The rate of bone loss was more in group II compared with group I. CONCLUSION Greater masticatory function was demonstrated by the non-osteoporotic group, and the rate of RRR was more in the osteoporotic group compared with the normal group. In this pilot study, osteoporosis leads to greater RRR, decreased masticatory performance and efficiency in edentulous subjects 6 months after denture insertion. Screening for osteoporosis is suggested as a routine procedure for all edentulous subjects undergoing rehabilitation. Recall check-ups for osteoporotic patients should be more frequent, and these patients may require more frequent denture remakes.

Current biomedical waste management practices and cross-infection control procedures of dentists in India

OBJECTIVES To investigate the knowledge, attitudes and behaviour of dentists working in dental clinics and dental hospitals regarding biomedical waste management and cross-infection control. METHODS A national survey was conducted. Self-administered questionnaires were sent to 800 dentists across India. RESULTS A total of 494 dentists responded, giving a response rate of 61.8%. Of these, 228 of 323 (70.6%) general dentists reported using boiling water as a sterilising medium and 339 (68.6%) dentists reported disposing of hazardous waste such as syringes, blades and ampoules in dustbins and emptying these into municipal corporation bins. CONCLUSIONS Dentists should undergo continuing education programmes on biomedical waste management and infection control guidelines. Greater cooperation between dental clinics and hospitals and pollution control boards is needed to ensure the proper handling and disposal of biomedical waste.

Comparative evaluation of zinc oxide eugenol versus gelatin sponge soaked in plasma rich in growth factor in the treatment of dry socket: An initial study

Purpose: The aim of this study was to report a comparison between the zinc oxide eugenol dressing and plasma rich in growth factor (PRGF) with gelatin sponge in the treatment of dry socket. Materials and Methods: This study comprised of 45 patients of dry socket in the span of one year. The patients were randomly divided into three groups on the basis of treatments: Group A (PRGF with gelatin sponge), group B (zinc oxide eugenol group), and group C (irrigation with sterile saline only). The clinical progress was noted at 1st, 2nd, 3rd, 7th, and 15th day after the treatment. Results: Patients healing was better in group A than in group B but symptomatic pain relief was faster in group B. Group C fared worst in both aspects. Conclusion: We conclude that PRGF with gelatin sponge might be a treatment of choice in the management of dry socket.

Use of Diagnostic and Surgical Stent: A Simplified Approach for Implant Placement

Dental implantology has emerged as a practical alternative to traditional prosthodontics. Since the beginning, placement of implant in the bone to achieve a prosthetic solution that fulfils biologic, aesthetic and biomechanical requirements has been a challenge. In the past, implant site and inclination were dictated by residual bone quality. The desire for predictable prosthesis led to the development of prosthetically guided implantology. This concept establishes the correct implant position during the diagnostic stage according to planned definitive restoration. In prosthetically guided implantology where ideal placement of implant is determined by the definitive restoration, use of radiographic and surgical stent in conjunction with dental CT scan can play an important role. A stent is an appliance used for radiographic evaluation during treatment planning for implant placement and during surgical procedures to locate optimal implant placement site. The stent with dental CT scan enables the dental team to identify specific sites of prospective implant surgery and hence determines the optimal position and angulation of implant relative to occlusal load. Aided by stent the surgeon can avoid undesirable implant site preparation and minimize unnecessary osteotomy, resulting in favorable design of prosthesis, reduced surgical trauma, reduced surgical time and increased patient comfort. This case report is an insight into the method of fabrication of simple and cost effective stent for implant placement and its advantages over the other techniques of stent fabrication.

High Performance Liquid Chromatographic Determination of Residual Monomer Released from Heat‐Cured Acrylic Resin. An In Vivo Study

PURPOSE Heat-polymerized acrylic resins are used in dentistry for complete denture fabrication. Despite the polymerization method, conversion of monomer into polymer is often incomplete with free or unreacted residual monomer remaining in the polymerized resin. The aim of this study was to determine the amount of residual monomeric methyl methacrylate (MMA) leaching in the saliva of patients wearing complete dentures in their postinsertion period. MATERIALS AND METHODS Thirty edentulous participants as first-time complete denture wearers (age 60 to 65 years) were selected. All the prostheses were fabricated using a similar standard technique with a heat-cured acrylic resin denture base material. Saliva samples were collected at time intervals of 1 hour, 1 day, and 3 days postdenture insertion. Participants were asked to discharge saliva every 30 seconds into a pre-weighed screw-capped container for a 5-minute period. MMA levels were measured using high performance liquid chromatography. Data were analyzed by ANOVA and Tukey-HSD. RESULTS The maximum concentration of monomer released into saliva peaked 1 day after insertion of the complete dentures. The mean (SD) MMA content was 0.04 ± 0.01 (μg/ml) 1 hour after insertion, and 0.3 ± 0.09 (μg/ml), and 0.05 ± 0.01 (μg/ml) on the first and third days postinsertion, respectively. CONCLUSIONS Although the released monomeric MMA was not at toxic levels, it could potentially sensitize complete denture patients or elicit an allergic reaction. The risk of the residual material as a primary irritant for a sensitizing reaction could be minimized by immersion of the denture in water for 24 hours before insertion.

Evaluation of the efficacy of a prosthodontic stent in determining the position of dental implants.

PURPOSE To evaluate the efficacy of a dual purpose (diagnostic and surgical) acrylic resin stent with gutta percha marker used in conjunction with 3D imaging in determination of the position and inclination of dental implants. MATERIALS AND METHODS This study was performed as a case control study. A total of 41 implants, of which 20 had been placed without the use of stents and 3D imaging (control group) and 21 were placed using stents and 3D imaging (study group), were studied. A diagnostic and surgical stent with radio-opaque indicator (gutta percha) was fabricated to determine the planned prosthetic position and inclination of the implant. Computed tomography images were obtained and were analyzed using Denta Scan software. The position of the implant was analyzed in mesiodistal and buccolingual dimensions in terms of both position and angulation. SPSS v15.0 was used for statistical analysis (p < 0.05 was considered statistically significant). RESULTS The study group demonstrated an overall 98.9% efficacy of the test technique being used in the study. On qualitative assessment, the results obtained were within the defined ideal threshold level for four of five parameters (distance from buccal and lingual cortical plate, inter-implant distance, and buccolingual angulation of the implant relative to underlying alveolar bone). For mesiodistal distance from adjacent teeth, the observation was not above threshold value for only one case. For the control group, the overall efficacy was 66.9%. CONCLUSION The technique of combined use of a prosthodontic stent and 3D imaging is an efficacious and better technique in achieving an ideal position of dental implants as compared to conventional techniques using periapical and panoramic radiographs and a cast.

Evaluation of various treatment modalities in sleep bruxism

STATEMENT OF PROBLEM Sleep bruxism (SB) is an oral condition that is associated with tooth wear, orofacial pain, and interference with sleep. The most recommended management technique is the use of an occlusal splint. Although the mandibular advancement device (MAD) has shown good results, few well-designed randomized controlled trials are available with which to compare these treatment options. Therefore, an evaluation of the effect of these 2 appliances on SB is needed. PURPOSE The purpose of this study was to evaluate the effect of a MAD and a maxillary occlusal splint (MOS) on the sleep quality and SB activity of participants with SB. MATERIAL AND METHODS In this randomized controlled trial, 28 participants were randomly supplied with either a MAD or MOS. The sleep quality of the participants was evaluated with the Pittsburgh Sleep Quality Index (PSQI) and their SB activity with electromyographic activity of the masseter with polysomnography. These variables were measured at baseline, 1 month, and 3 months. RESULTS Of 32 participants, 28 had data available for statistical analysis, as 4 participants did not return for follow-up examination. Both the MOS and MAD significantly reduced the PSQI and SB episodes and bursts in participants after 3 months (P<.05). The MAD provided greater reduction in SB episodes per hour after 3 months compared to the MOS. Participants supplied with a MAD reported more discomfort in their feedback form than participants using a MOS. CONCLUSIONS Both the MAD and MOS provided significantly improved sleep quality and a decrease in SB episodes at 3 months.

Effect of mandibular advancement device on sleep bruxism score and sleep quality.

Statement of problem. The use of mandibular advancement devices (MADs) in the treatment of sleep bruxism is gaining widespread importance. However, the effects of MADs on sleep bruxism scores, sleep quality, and occlusal force are not clear. Purpose. The purpose of this clinical study was to analyze the effect of MADs on sleep bruxism scores, sleep quality, and occlusal force. Material and methods. This uncontrolled before and after study enrolled 30 participants with sleep bruxism. Outcomes assessed were sleep quality, sleep bruxism scores (sleep bruxism bursts and sleep bruxism episodes/hour), and occlusal force before and after 15 and 30 days of using a MAD. Sleep bruxism scores were assessed by ambulatory polysomnography and sleep quality by using the Pittsburgh sleep quality index (PSQI). Occlusal force was recorded by using a digital gnathodynamometer in the first molar region on both sides. Statistical analysis was done by 1‐factor repeated measures ANOVA (&agr;=.05). Results. Statistically significant reductions in sleep bruxism bursts/h, sleep bruxism episodes/h, and PSQI scores were found after 15 and 30 days of using a MAD (P<.001). Statistically significant reduction in occlusal force on both sides was found only after 15 days (P<.001) but not after 30 days of using a MAD (P=.292 on left side, and P=.575 on the right side). Conclusions. The study showed a short‐term improvement in sleep bruxism scores, sleep quality, and reduction in occlusal force in sleep bruxism participants after using MADs.