Bárbara C. Leal

Palladium metal nanoparticles stabilized by ionophilic ligands in ionic liquids: synthesis and application in hydrogenation reactions

The reduction of [Pd(acac)(COD)]BF4 (acac = acetylacetonate; COD = 1,5-cyclooctadiene), dissolved in BMI·BF4, in the presence of P- or N-containing ionophilic ligands by H2 yields “soluble” and stable [Pd(0)]n nanoparticles (NPs). These ionic liquid soluble NPs are active and selective catalysts for the hydrogenation of 1,3-dienes and alkynes under mild reaction conditions. Selectivities up to 87% to cis-2-pentene and 95% conversion were obtained using Pd NPs modified with 1-(3-(diphenylphosphino)propyl)-2,3-dimethyl-1H-imidazol-3-ium N-bis(trifluoromethylsulfonyl)imide in 1-n-butyl-3-methylimidazolium tetrafluoroborate.

UHMWPE-layered silicate nanocomposites by in situ polymerization with tris(pyrazolyl)borate titanium/clay catalyst

Polyethylene-MMT nanocomposites were prepared by in situ polymerization methodology using TpMs*TiCl3 (1) intercalated into the gallery of Cloisite® 30B (C30B) using methylaluminoxane (MAO) as activator. From the powder X-ray diffraction (XRD) analysis it was observed that the basal spacing of the activated organoclay changes from 1.85 nm (2θ = 4.8) to 2.18 nm (2θ = 4.0) indicating that the intercalation of the titanium catalyst into the gallery took place. The catalytic system 1/C30B/MAO was active in the ethylene polymerization under different reaction conditions. The exfoliated morphology of the PE-MMT nanocomposite was further examined and confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis. The presence of exfoliated clay (5 wt.%) in the PE matrix confers better mechanical properties (flexural modulus and storage modulus) when compared with the ones displayed by the neat PE produced using exclusively 1.

Interacting Superparamagnetic Iron(II) Oxide Nanoparticles: Synthesis and Characterization in Ionic Liquids

Interacting superparamagnetic iron(II) oxide nanoparticles (NPs) with sizes of 5.3 ± 1.6 nm were prepared by simple decomposition of [Fe(COT)2] (COT = 1,3,5,7-cyclooctatetraene) with 5 bar of H2 in 1-n-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI·NTf2) ionic liquid (IL). The static and dynamic magnetic characterization revealed a superparamagnetic behavior with weak dipolar interactions of these NPs. In situ structural studies by X-ray absorption spectroscopy demonstrated that they consist of nanostructured FeO. This approach is an appropriate method to prepare and stabilize nanostructured FeO particles, where the presence of an IL proved to be fundamental to suppress the aggregation and usual overoxidation of the FeO NPs.

Ru-Catalyzed Estragole Isomerization under Homogeneous and Ionic Liquid Biphasic Conditions

The isomerization of estragole to trans-anethole is an important reaction and is industrially performed using an excess of NaOH or KOH in ethanol at high temperatures with very low selectivity. Simple Ru-based transition-metal complexes, under homogeneous, ionic liquid (IL)-supported (biphasic) and “solventless” conditions, can be used for this reaction. The selectivity of this reaction is more sensitive to the solvent/support used than the ligands associated with the metal catalyst. Thus, under the optimized reaction conditions, 100% conversion can be achieved in the estragole isomerization, using as little as 4 × 10–3 mol % (40 ppm) of [RuHCl(CO)(PPh3)3] in toluene, reflecting a total turnover number (TON) of 25 000 and turnover frequencies (TOFs) of up to 500 min–1 at 80 °C. Using a dimeric Ru precursor, [RuCl(μ-Cl)(η3:η3-C10H16)]2, in ethanol associated with P(OEt)3, a TON of 10 000 and a TOF of 125 min–1 are obtained with 100% conversion and 99% selectivity. These two Ru catalytic systems can be transposed to biphasic IL systems by using ionic-tagged P-ligands such as 1-(3-(diphenylphosphanyl)propyl)-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide immobilized in 1-(3-hydroxypropyl)-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl) imide with up to 99% selectivity and almost complete estragole conversion. However, the reaction is much slower than that performed under solventless or homogeneous conditions. The use of ionic-tagged ligands significantly reduces the Ru leaching to the organic phase, compared to that in reactions performed under homogeneous conditions, where the catalytic system loses catalytic performance after the second recycling. Detailed kinetic investigations of the reaction catalyzed by [RuHCl(CO)(PPh3)3] indicate that a simplified kinetic model (a monomolecular reversible first-order reaction) is adequate for fitting the homogeneous reaction at 80 °C and under biphasic conditions. However, the kinetics of the reaction are better described if all of the elementary steps are taken into consideration, especially at 40 °C.

Abordagem teórico-experimental da teoria do campo cristalino na disciplina de síntese inorgânica

We describe herein the synthesis and characterization of the complexes KNiF3, [Ni(en)3]I2, [Ni(en)3]Cl2, [Ni(acac)2(H2O)2], [Ni(en)2(H2O)2]Cl2 and [Ni(NH3)6](BF4)2 (en = ethylenediamine, acac- = acetylacetonate) performed in the inorganic synthesis major course at the Chemistry Institute of UFRGS (Universidade Federal do Rio Grande do Sul). The compounds were characterized by infrared and electronic spectroscopy and the electrolytic conductivity was measured. The parameters 10Dq and B were obtained from the electronic spectra and the nefelauxetic and spectrochemical series were determined. The obtained spectrochemical series was F- < acac- < NH3 < en and the nefeulaxetic series was en < NH3 < acac- < F-.