Barbara Luppi

Chitosan-based hydrogels for nasal drug delivery: from inserts to nanoparticles

Importance of the field: Chitosan represents a multifunctional polymer, featuring both mucoadhesive and permeation-enhancing properties and therefore is a widely studied excipient for mucosal drug delivery. As regards nasal administration, chitosans have been used for the preparation of gels, solid inserts, powders and nanoparticles in which a three-dimensional network can be recognized. Areas covered in this review: This review provides a discussion of the different nasal dosage forms based on chitosan hydrogels. In the first section intranasal delivery is discuss as a useful tool for non-invasive administration of drugs intended for local or systemic treatments. Then chitosan-based hydrogels are described with a focus on their mucoadhesive and permeation-enhancing ability as well as their capacity of controlled drug release. Finally, a detailed discussion regarding several examples of the different nasal dosage forms is reported, including considerations on in vitro, ex vivo and in vivo studies. What the reader will gain: Summary and discussion of recent data on the different pharmaceutical forms based on chitosan hydrogels could be of interest to researchers dealing with nasal drug delivery. Take home message: The aim of this review is to stimulate further investigations in order to achieve the collection of harmonized data and concrete clinical perspectives.

Freeze-dried chitosan/pectin nasal inserts for antipsychotic drug delivery

The objective of this investigation was the development of chitosan/pectin based nasal inserts to improve bioavailability of antipsychotic drugs in the treatment of psychotic symptoms. In fact, the nasal route of administration ensures systemic availability avoiding the first-pass metabolism and obtaining more efficacious treatments. Chitosan/pectin polyelectrolyte complexes were prepared at pH 5.0 with different polycation/polyanion molar ratios and lyophilized in small inserts in the presence of chlorpromazine hydrochloride. The results show that higher amount of pectin in the complexes, with respect to higher amount of chitosan, produced a more evident porous structure of the nasal inserts, improving water uptake ability and mucoadhesion capacity. Finally, the presence of increasing amounts of pectin allowed the interaction with chlorpromazine hydrochloride inducing the formation of less hydratable inserts thus limiting drug release and permeation. This investigation verifies the formation of polyelectrolyte complexes between chitosan and pectin at pH values in the vicinity of the pKa interval of the two polymers and confirms the potential of these complexes, capable of achieving antipsychotic drug delivery in the nasal cavity.

Albumin nanoparticles carrying cyclodextrins for nasal delivery of the anti-Alzheimer drug tacrine

Peroral administration of tacrine, the first acetylcholinestearse inhibitor licensed for the treatment of Alzheimers disease, is associated with low bioavailability, due to an extended first-pass methabolism, short elimination half-life and hepatotoxicity. Nasal drug delivery may reduce the degree of these problems. Tacrine hydrochloride nasal delivery is here investigated by means of albumin nanoparticles carrying beta cyclodextrin and two different beta cyclodextrin derivatives (hydroxypropyl beta cyclodextrin and sulphobutylether beta cyclodextrin). Bovine serum albumin nanoparticles were obtained using a coacervation method, followed by thermal cross-linking, starting from protein solution at alkaline pH. After preparation, nanoparticles were loaded by soaking from solutions of tacrine hydrochloride and lyophilised. Thermal analysis (differential scanning calorimetry and thermogravimetric analysis) supported by Fourier Transform Infrared Spectroscopy were performed in order to confirm protein cross-linking in nanosphere structure and possible drug/carrier interaction occurred after the loading process. Moreover, size, polydispersity, zeta potential and morphology of the nanoparticles were investigated as well as drug loading, mucoadhesion properties and ex-vivo drug permeation ability. Results indicate that all the nanoparticles presented a mean size and a polydispersity lower than 300nm and 0.33nm, respectively, were spherical shaped and negatively charged even after drug loading. Moreover, the presence of the different beta cyclodextrins in the polymeric network affected drug loading and could differently modulate nanoparticle mucoadhesiveness and drug permeation behaviour.

Polymeric nanoparticles composed of fatty acids and polyvinylalcohol for topical application of sunscreens

Benzophenone‐3 (BZP) or oxybenzone is widely used in many cosmetic formulations, such as sunscreen lotions or emulsions, shampoos and hair sprays. The nature of the vehicle used can enhance or block the percutaneous absorption of UV filter. In this work, we hydrophobically modified polyvinylalcohol 10000 (PVA) with fatty acids (FAs) to obtain PVA‐FA derivatives for the preparation of lipophilic polymeric nanoparticles able to prevent BZP movement towards the skin. Synthesized PVA‐FA derivatives were confirmed by H1NMR. Nanoparticles loaded with BZP were prepared using a solvent extraction method. The particle size was monitored by means of dynamic light scattering measurements. In‐vitro skin permeation studies were performed.

Effect of chitosan on progesterone release from hydroxypropyl-β-cyclodextrin complexes

An inclusion complex composed of progesterone (Prog) and hydroxypropyl-beta-cyclodextrin (HPbetaCD) was prepared by the spray-drying and freeze-drying methods. Prog alone and its inclusion complex with HPbetaCD were incorporated into chitosan by spray-drying and freeze-drying. The inclusion complex was characterized by IR and DSC. The inclusion complex was investigated in solution by phase solubility diagrams and stability constant was determined at pH 7.4 and at different temperatures (10, 25 and 37 degrees C) to obtain the thermodynamic parameters of inclusion. The results indicate that the Prog-HPbetaCD inclusion complex is more water soluble than Prog alone. Release data from all samples showed significant improvement of the dissolution rate of Prog and a controlled release is obtained in the presence of chitosan.

Chitosan/alginate complexes for vaginal delivery of chlorhexidine digluconate

Chitosan/alginate complexes were prepared at different polycation/polyanion molar ratios and freeze-dried vaginal inserts were obtained for chlorhexidine digluconate local delivery in genital infections. Complex yield, FT-IR spectra, and TGA thermograms were studied to confirm the interaction between the two polyions. The influence of different complexes on physical handling, morphology, and drug distribution in the samples were evaluated by friability test, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS), respectively. In vitro water-uptake, mucoadhesion and release tests were performed as well as microbiological tests toward pathogenic vaginal microorganisms. The results showed that the selection of suitable chitosan/alginate molar ratio and drug loading allowed modulate insert ability to hydrate, adhere to the mucosa, and release chlorhexidine digluconate. The insert containing an excess of alginate was found to be the best performing formulation and showed good antimicrobial activity toward the pathogens Candida albicans and Escherichia coli.

Crosslinked Polyvinylalcohol Hydrogels as Vehicles for Hydrophilic Drugs

Polyvinylalcohol crosslinked with succinyl, adipoyl, or sebacoyl chloride at two different degrees of crosslinking was prepared and employed as a supporting material for aqueous topical gels containing propranolol hydrochloride, which was chosen as a hydrophilic model drug suitable for transdermal delivery. We analysed the effect of the nature of the crosslinker and the degree of crosslinking on drug permeation through porcine skin by means of the permeation parameters obtained from the gels and the corresponding aqueous solution. The gels showed greater drug permeation than the liquid solution due to an increase in drug solubility in the skin. Increasing degree of crosslinking and decreasing crosslinker acyl chain length in the gel enhance the drug permeability through the skin.

Chitosan based micro- and nanoparticles for colon-targeted delivery of vancomycin prepared by alternative processing methods

The aim of this work was to prepare chitosan (CH) based particulate formulations for colon delivery of vancomycin (VM). Chitosan microparticles (MPs) and nanoparticles (NPs) loaded with VM were prepared using different CH/tripolyphosphate (TPP) molar ratios and different technological processes. In particular, nanoparticles were prepared by ionic gelation and freeze-drying to recover these particles, or, alternatively, by spray-drying method. Microparticles were prepared using a different spray-dryer. Micro- and nanoparticles were characterized in terms of size distributions by photon correlation spectroscopy (PCS), while encapsulation and drug loading efficiencies were studied using a dialysis method. Fourier Transform Infrared Spectroscopy (FT-IR) was employed to determine the surface composition of the micro- and nanoparticles respectively, and the morphologies of the developed systems were studied by scanning electron microscopy (SEM). Water uptake as well as drug release profiles were also measured. Antibacterial activity against Staphylococcus aureus, a Gram-positive model strain, was evaluated. FT-IR results suggested an electrostatic interaction between VM and CH/TPP particles. Moreover, the particles were found to hold a positive zeta-potential, indicating the presence of CH on the particle surfaces. Particle size and encapsulation efficiency were mainly influenced by the different manufacturing processes employed. Nanoparticles obtained by spray-drying showed the best results in terms of water uptake and drug release rate. Moreover, they showed a good bactericidal activity against S. aureus.

Vaginal inserts based on chitosan and carboxymethylcellulose complexes for local delivery of chlorhexidine: preparation, characterization and antimicrobial activity.

The aim of this work was to prepare vaginal inserts based on chitosan/carboxymethylcellulose polyelectrolyte complexes for local delivery of chlorhexidine digluconate. Complexes were prepared with different chitosan/carboxymethylcellulose molar ratios at a pH value close to pKa interval of the polymers and were characterized in terms of physico-chemical properties, complexation yield and drug loading. Then complexes were used to prepare inserts as vaginal dosage forms and their physical handling, morphology, water-uptake ability and drug release properties as well as antimicrobial activity toward Candida albicans and Escherichia coli were evaluated. Results confirmed the ionic interaction between chitosan and carboxymethylcellulose and the influence of the charge amount on the complexation yield. Complexes were characterized by high values of drug loading and showed increasing water-uptake ability with the increase of carboxymethylcellulose amount. The selection of appropriate chitosan/carboxymethylcellulose molar ratios allowed to obtain cone-like shaped solid inserts, easy to handle and able to hydrate releasing the drug over time. Finally, the formulated inserts showed antimicrobial activity against common pathogens responsible for vaginal infections.

pH-sensitive polymeric physical-mixture for possible site-specific delivery of ibuprofen

Delivery of drugs to the large bowel has been extensively investigated during the last decade. The aim of this work was to study polymethacrylic acid-co-methylmethacrylate substituted with fatty acids (lauric, myristic, palmitic and stearic) at 20% substitution degree (PMA-LAUR20, PMA-MIR20, PMA-PALM20 and PMA-STEA20) or 40% substitution degree (PMA-LAUR40, PMA-MIR40, PMA-PALM40 and PMA-STEA40) for preparing a pH-sensitive physical mixture for site-specific delivery of ibuprofen chosen as a model drug. The preparation and characterization of the substituted polymers were described. In vitro release studies were conducted at different pH levels (3 h at pH 2.0, 2 h at pH 5.5, 4 h at pH 7.4 and until 24 h at pH 7.0) and phase-solubility diagrams of ibuprofen with the different substituted polymers were obtained at pH 7.0 to obtain information on the influence of amphiphilic polymers in increasing drug solubility and drug availability in the colon.