Bas F. M. de Waal

Controlled Supramolecular Oligomerization of C3‐Symmetrical Molecules in Water: The Impact of Hydrophobic Shielding

The supramolecular oligomerization of three water-soluble C(3)-symmetrical discotic molecules is reported. The compounds all possess benzene-1,3,5-tricarboxamide cores and peripheral Gd(III)-DTPA (diethylene triamine pentaacetic acid) moieties, but differ in their linker units and thus in their propensity to undergo secondary interactions in H(2)O. The self-assembly behavior of these molecules was studied in solution using circular dichroism, UV/Vis spectroscopy, nuclear magnetic resonance, and cryogenic transmission electron microscopy. The aggregation concentration of these molecules depends on the number of secondary interactions and on the solvophobic character of the polymerizing moieties. Hydrophobic shielding of the hydrogen-bonding motif in the core of the discotic is of paramount importance for yielding stable, helical aggregates that are designed to be restricted in size through anti-cooperative, electrostatic, repulsive interactions.

Synthesis and self-assembly of discrete dimethylsiloxane-lactic acid diblock co-oligomers : The dononacontamer and its shorter homologues

Most of the theoretical and computational descriptions of the phase behavior of block copolymers describe the chain ensembles of perfect and uniform polymers. In contrast, experimental studies on block copolymers always employ materials with disperse molecular makeup. Although most polymers are so-called monodisperse, they still have a molecular weight dispersity. Here, we describe the synthesis and properties of a series of discrete length diblock co-oligomers, based on oligo-dimethylsiloxane (oDMS) and oligo-lactic acid (oLA), diblock co-oligomers with highly noncompatible blocks. By utilizing an iterative synthetic protocol, co-oligomers with molar masses up to 6901 Da, ultralow molar mass dispersities (Đ ≤ 1.00002), and unique control over the co-oligomer composition are synthesized and characterized. This specific block co-oligomer required the development of a new divergent strategy for the oDMS structures by which both bis- and monosubstituted oDMS derivatives up to 59 Si-atoms became available. The incompatibility of the two blocks makes the final coupling more demanding the longer the blocks become. These optimized synthetic procedures granted access to multigram quantities of most of the block co-oligomers, useful to study the lower limits of block copolymer phase segregation in detail. Cylindrical, gyroid, and lamellar nanostructures, as revealed by DSC, SAXS, and AFM, were generated. The small oligomeric size of the block co-oligomers resulted in exceptionally small feature sizes (down to 3.4 nm) and long-range organization.

End Groups of Functionalized Siloxane Oligomers Direct Block-Copolymeric or Liquid-Crystalline Self-Assembly Behavior

Monodisperse oligodimethylsiloxanes end-functionalized with the hydrogen-bonding ureidopyrimidinone (UPy) motif undergo phase separation between their aromatic end groups and dimethylsiloxane midblocks to form ordered nanostructures with domain spacings of <5 nm. The self-assembly behavior of these well-defined oligomers resembles that of high degree of polymerization (N)-high block interaction parameter (χ) linear diblock copolymers despite their small size. Specifically, the phase morphology varies from lamellar to hexagonal to body-centered cubic with increasing asymmetry in molecular volume fraction. Mixing molecules with different molecular weights to give dispersity >1.13 results in disorder, showing importance of molecular monodispersity for ultrasmall ordered phase separation. In contrast, oligodimethylsiloxanes end-functionalized with an O-benzylated UPy derivative self-assemble into lamellar nanostructures regardless of volume fraction because of the strong preference of the end groups to aggregate in a planar geometry. Thus, these molecules display more classically liquid-crystalline self-assembly behavior where the lamellar bilayer thickness is determined by the siloxane midblock. Here the lamellar nanostructure is tolerant to molecular polydispersity. We show the importance of end groups in high χ-low N block molecules, where block-copolymer-like self-assembly in our UPy-functionalized oligodimethylsiloxanes relies upon the dominance of phase separation effects over directional end group aggregation.

Multivalent Choline Dendrimers as Potent Inhibitors of Pneumococcal Cell-Wall Hydrolysis†

Cholin bindende Proteine aus Streptococcus pneumoniae erkennen unterschiedliche Cholin-Architekturen auf bakteriellen Zellwanden. Cholinfunktionalisierte Dendrimere hemmen diese lebenswichtigen Enzyme stark, und mit einer 103- bis 104-fach hoheren Affinitat als freies Cholin: So werden Autolyse und Zelltrennung in Bakterienkulturen durch Konzentrationen im niedrigen mikromolaren Bereich inhibiert (siehe Bild).

A supramolecular approach to multivalent target-specific MRI contrast agents for angiogenesis

The synthesis of a cyclic peptide-Gd(III)DTPA molecule equipped with biotin is presented, yielding a well-defined multivalent MRI contrast agent after its coupling to avidin.

Sub‐5 nm Patterning by Directed Self‐Assembly of Oligo(Dimethylsiloxane) Liquid Crystal Thin Films

Highly ordered nanopatterns are obtained at sub-5 nm periodicities by the graphoepitaxial directed self-assembly of monodisperse, oligo(dimethylsiloxane) liquid crystals. These hybrid organic/inorganic liquid crystals are of high interest for nanopatterning applications due to the combination of their ultrasmall feature sizes and their ability to be directed into highly ordered domains without additional annealing.

Dispersity under Scrutiny: Phase Behavior Differences between Disperse and Discrete Low Molecular Weight Block Co-Oligomers

An experimental study is presented in which we compare the bulk phase behavior of discrete and (partially) disperse diblock co-oligomers (BCOs) with high χ–low N. To this end, oligomers of dimethylsiloxane (oDMS) and lactic acid (oLA) were synthesized, each having either a discrete number of repeat units or a variable block length. Ligation of the blocks resulted in oDMS–oLA BCOs with dispersities ranging from <1.00001 to 1.09, as revealed by mass spectroscopy and size exclusion chromatography. The phase behavior of all BCOs was investigated by differential scanning calorimetry and small-angle X-ray scattering. Compared to the well-organized lamellae formed by discrete oDMS–oLA, we observe that an increase in the dispersity of these BCOs results in (1) an increase of the stability of the microphase-segregated state, (2) a decrease of the overall degree of ordering, and (3) an increase of the domain spacing.

A Versatile Method for the Preparation of Ferroelectric Supramolecular Materials via Radical End-Functionalization of Vinylidene Fluoride Oligomers

A synthetic method for the end-functionalization of vinylidene fluoride oligomers (OVDF) via a radical reaction between terminal olefins and I-OVDF is described. The method shows a wide substrate scope and excellent conversions, and permits the preparation of different disc-shaped cores such as benzene-1,3,5-tricarboxamides (BTAs), perylenes bisimide (PBI), and phthalocyanines (Pc) bearing three to eight ferroelectric oligomers at their periphery. The formation, purity, OVDF conformation, and morphology of the final adducts has been assessed by a combination of techniques, such as NMR, size exclusion chromatography, differential scanning calorimetry, polarized optical microscopy, and atomic force microscopy. Finally, PBI-OVDF and Pc-OVDF materials show ferroelectric hysteresis behavior together with high remnant polarizations, with values as high as Pr ≈ 37 mC/m(2) for Pc-OVDF. This work demonstrates the potential of preparing a new set of ferroelectric materials simply by attaching OVDF oligomers to different small molecules. The use of carefully chosen small molecules paves the way to new functional materials in which ferroelectricity and electrical conductivity or light-harvesting properties coexist in a single compound.

A pitfall of using 2-[(2E)-3-(4-tert-butylphenyl)-2-methylprop-2-enylidene]malononitrile as a matrix in MALDI TOF MS: chemical adduction of matrix to analyte amino groups.

2-[(2E)-3-(4-tert-Butylphenyl)-2-methylprop-2-enylidene]malononitrile (DCTB) has been considered as an excellent matrix for matrix-assisted laser desorption/ionization (MALDI) of many types of synthetic compounds. However, it might provide troublesome results for compounds containing aliphatic primary or secondary amino groups. For these compounds, strong extra ion peaks with a mass difference of 184.1 Da were usually observed, which might falsely indicate the presence of some unknown impurities that were not detected by other matrices. On the basis of the possible mechanisms proposed, these extra ions are the products of nucleophilic reactions between analyte amino groups and DCTB molecules or radical cations. In these reactions, an amino group replaces the dicyanomethylene group of DCTB forming a matrix adduct via a -C=N-bond. An aliphatic primary amine could react easily with DCTB and the reaction could start once they are mixed in a MALDI solution. For an aliphatic secondary amine, on the other hand, the reaction most likely occurs in the gas phase. Protonation of amino groups by adding acid seems to be a useful way to stop DCTB adduction for compounds with one single amino group, but not for compounds with multiple amino groups. Unlike aliphatic primary or secondary amines, aliphatic tertiary amines and aromatic amines do not yield DCTB adducts. This is because tertiary amines do not have the required transferrable H-(N) atom to form an extra -C=N-bond, while aromatic amines are not sufficiently nucleophilic to attack DCTB. In view of the possible matrix adduction, care should be taken in MALDI time-of-flight mass spectrometry (TOF MS) when DCTB is used as the matrix for compounds containing amino group(s).

Nanopatterned Superlattices in Self‐Assembled C2‐Symmetric Oligodimethylsiloxane‐Based Benzene‐1,3,5‐Tricarboxamides

The synthesis of C3 - and C2 -symmetric benzene-1,3,5-tricarboxamides (BTAs) containing well-defined oligodimethylsiloxane (oDMS) and/or alkyl side chains has been carried out. The influence of the bulkiness of the oDMS chains in the aggregation behavior of dilute solutions of the oDMS-BTAs in methylcyclohexane was studied by temperature-dependent UV spectroscopy. The formation of hierarchically self-assembled aggregates was observed at different BTA concentrations, the tendency of aggregation increases by shortening or removing oDMS chains. Chiral BTAs were investigated with circular dichroism (CD) spectroscopy, showing a stronger tendency to aggregate than the achiral ones. Majority rules experiments show a linear behavior consistent with the existence of a high mismatch penalty energy. The most efficient oDMS-BTAs organogelators have the ability to form stable organogels at 5 mg mL(-1) (0.75 wt %) in hexane. Solid-state characterization techniques indicate the formation of an intermolecular threefold hydrogen bonding between adjacent molecules forming thermotropic liquid crystals, exhibiting a hexagonal columnar organization from room temperature to above 150 °C. A decrease of the clearing temperatures was observed when increasing the number and length of the oligodimethylsiloxane chains. In addition to the three-fold hydrogen bonding that leads to columnar liquid crystalline phase, segregation between the oDMS and aliphatic chains takes place in the BTA functionalized with two alkyl and one oDMS chain leading to a superlattice within the hexagonal structure with potential applications in lithography.