Beini Gong

Fabrication and photocatalytic properties of a visible-light responsive nanohybrid based on self-assembly of carboxyl graphene and ZnAl layered double hydroxides

The synthesis of a layer-by-layer ordered nanohybrid with a sandwich structure was based on electrostatically driven self-assembly between the negatively charged carboxyl graphene monolayer and the positively charged ZnAl-layered double hydroxide nanosheets. The characteristics of the layer-by-layer ordered nanohybrid were investigated by SEM, TEM, AFM and XRD. The enhanced photocatalytic activity of the calcined product was determined by the photocatalytic degradation of the cationic dye methylene blue (MB) and anionic dye orange G (OG) under visible light. The enhanced photocatalytic efficiency was mainly attributed to the effective electronic coupling between graphene and calcined ZnAl-LDH. Additionally, the chemical stability of the calcined ZnAl-LDH is significantly improved by hybridization of graphene and this is attributed to the protection provided by the close contacted graphene with highly stability. This work also establishes a simple method for fabricating graphene-based nanohybrids with a sandwich structure.

Enhanced degradation of phenol by Sphingomonas sp. GY2B with resistance towards suboptimal environment through adsorption on kaolinite

The effects of clay minerals on microbial degradation of phenol under unfavorable environmental conditions were investigated. Degradation of phenol by Sphingomonas sp. GY2B adsorbed on kaolinite, montmorillonite, and vermiculite were evaluated in comparison with free bacteria under optimal conditions. Kaolinite was found to be the most effective in accelerating degradation rate (reducing the degradation time) as well as improving degradation efficiency (increasing the percentage of phenol degraded), with GY2B/kaolinite complex achieving a degradation efficiency of 96% within 6 h. GY2B adsorbed on kaolinite was more competent than free GY2B in degradation under conditions with high phenol concentrations and at alkaline pH. Kaolinite reduced the time required for degradation by 8-12 h and improved the degradation efficiency by as much as 82% at high phenol concentrations. Meanwhile, the GY2B/kaolinite complex reduced the degradation time by 24 h and improved the degradation efficiency by 46% at pH 12. The improvement was partially due to the buffering effects of kaolinite. It was also shown that Cr(VI) and kaolinite synergistically enhanced the degradation by GY2B, with Cr(VI) and kaolinite both increasing the degradation rate and kaolinite being primarily responsible for enhanced degradation efficiency. These results showed one of the common clay minerals, kaolinite, is able to significantly improve the microbial degradation performance, and protect microorganisms against unfavorable environment. Kaolinite can collaborate with Cr(VI) to further improve the microbial degradation performance. It is implied that clay minerals have great potential to be applied in enhancing the biodegradation of phenol.

Efficient inhibition of heavy metal release from mine tailings against acid rain exposure by triethylenetetramine intercalated montmorillonite (TETA-Mt).

The potential application of triethylenetetramine intercalated montmorillonite (TETA-Mt) in mine tailings treatment and AMD (acid mine drainage) remediation was investigated with batch experiments. The structural and morphological characteristics of TETA-Mt were analyzed with XRD, FTIR, DTG-TG and SEM. The inhibition efficiencies of TETA-Mt against heavy metal release from mine tailings when exposed to acid rain leaching was examined and compared with that of triethylenetetramine (TETA) and Mt. Results showed that the overall inhibition by TETA-Mt surpassed that by TETA or Mt for various heavy metal ions over an acid rain pH range of 3-5.6 and a temperature range of 25-40°C. When mine tailings were exposed to acid rain of pH 4.8 (the average rain pH of the mining site where the mine tailings were from), TETA-Mt achieved an inhibition efficiency of over 90% for Cu(2+), Zn(2+), Cd(2+) and Mn(2+) release, and 70% for Pb(2+) at 25°C. It was shown that TETA-Mt has a strong buffering capacity. Moreover, TETA-Mt was able to adsorb heavy metal ions and the adsorption process was fast, suggesting that coordination was mainly responsible. These results showed the potential of TETA-Mt in AMD mitigation, especially in acid rain affected mining area.

Synthesis and characterization of Fullerene modified ZnAlTi-LDO in photo-degradation of Bisphenol A under simulated visible light irradiation

In this study, ZnAlTi layered double hydroxide (ZnAlTi-LDH) combined with fullerene (C60) was fabricated by the urea method, and calcined under vacuum atmosphere to obtain nanocomposites of C60-modified ZnAlTi layered double oxide (ZnAlTi-LDO). The morphology, structure and composition of the nanocomposites were analyzed by Scanning Electron Microscopy, High-resolution transmission electron microscopy, X-ray diffraction patterns, Fourier transform infrared and specific surface area. The UV-vis diffuse reflectance spectra indicated that the incorporation of C60 expanded the absorption of ZnAlTi-LDO to visible-light region. The photo-degradation experiment was conducted by using a series of C60 modified ZnAlTi-LDO with different C60 weight percentage to degrade Bisphenol A (BPA) under simulated visible light irradiation. In this experiment, the degradation rate of C60 modified ZnAlTi-LDO in photo-degradation of BPA under simulated visible light irradiation was over 80%. The intermediates formed in the degradation of BPA process by using LDO/C60-5% were 4-hydroxyphenyl-2-propanol, 4-isopropenylphenol and Phenol. Photogenerated holes, superoxide radical species, ·OH and singlet oxygen were considered to be responsible for the photodegradation process, among which superoxide radical species and ·OH played a predominant role in the photocatalytic reaction system. C60 modified ZnAlTi-LDO catalysts for photocatalytic reduction shows great potential in degradation of organic pollutants and environmental remediation.

Efficient Removal of Co2+ from Aqueous Solution by 3-Aminopropyltriethoxysilane Functionalized Montmorillonite with Enhanced Adsorption Capacity.

[This corrects the article DOI: 10.1371/journal.pone.0159802.].

Performance evaluation of integrated adsorption-nanofiltration system for emerging compounds removal: Exemplified by caffeine, diclofenac and octylphenol

Emerging pollutants introduced into surface water pose potential hazards to the safety of drinking water. In this study, the removal performance of three emerging compounds (exemplified by caffeine, diclofenac and octylphenol, with different physico-chemical properties) from synthetic water and source water by combining activated carbon (AC) adsorption and nanofiltration (NF) membrane processes was evaluated and analyzed. Results from synthetic water showed that the adsorption isotherms modeled well with the Langmuir equation. The removal performance of target compounds by AC-NF system was more remarkable than that of NF-AC combination. In the source water system, the integrated AC-NF process with coagulation pretreatment (the alum dosage of 60 mg/L) achieved satisfactory performance (the removal efficiencies of three target compounds reached > 95%). Results showed the electrostatic interaction and pollutant hydrophobicity determined the behavior and the fate of selected PPCPs/EDCs during the sequential treatment process of coagulation, activated carbon adsorption, and NF membrane separation. Finally, the AC and NF membranes were analyzed by Fourier transform infrared spectroscopy and scanning electron microscopy to understand the mechanisms, i.e. electrostatic and hydrophobic effects on the total removal process. It suggests that the integrated AC-NF process with coagulation pretreatment should be a feasible approach for removing emerging compounds in waterworks.

Immobilization of Sphingomonas sp. GY2B in polyvinyl alcohol–alginate–kaolin beads for efficient degradation of phenol against unfavorable environmental factors

In this study, batch experiments were carried out to evaluate the biodegradation of phenol by Sphingomonas sp. GY2B, which were immobilized in polyvinyl alcohol (PVA)-sodium alginate-kaolin beads under different conditions. The optimal degradation performance was achieved by GY2B immobilized in beads containing 1.0% (w/v) of kaolin, 10% (w/v) of PVA, 0.3% (w/v) of sodium alginate, 10% (v/v) of biomass dosage, and exposed to an initial phenol concentration of 100 mg/L. The experimental results indicated that PVA-sodium alginate-kaolin beads can accelerate the degradation rate of phenol by reducing the degradation time and also improve degradation rate. The biodegradation rate of phenol by immobilized cells (16.79 ± 0.81 mg/(L·h)) was significantly higher than that of free cells (11.49 ± 1.29 mg/(L·h)) under the above optimal conditions. GY2B immobilized on beads was more competent than free GY2B in degradation under conditions with high phenol concentrations (up to 300 mg/L) and in strong acidic (pH = 1) and alkaline (pH = 12) environments. Higher phenol concentrations inhibit the biomass and reduce the biodegradation rate, while the lower biodegradation rate at low initial phenol concentrations is attributed to mass transfer limitations. The Haldane inhibitory model was in agreement with the experimental data well, revealing that phenol showed a considerable inhibitory effect on the biodegradation by Sphingomonas sp. GY2B, especially at concentrations higher than 90 mg/L. Intra-particle diffusion model analysis suggests that adsorption of phenol by immobilized beads was controlled by both rapid surface adsorption as well as pore diffusion mechanism. Its worth noting that the presence of 1 mg/L Cr(VI) enhanced the biodegradation of phenol by free cells, while Cr(VI) showed no obvious impact on the removal of phenol by immobilized cells. In addition, immobilized cells were reused 16 times and removed 99.5% phenol, and when stored at 4 °C for 90 days, more than 99% phenol was removed. These results showed that immobilized cells can significantly improve the microbial degradation performance, and protect microorganisms against unfavorable environment. It is implied that PVA -sodium alginate-kaolin beads have great potential to be applied in a practical and economical phenolic wastewater treatment system.