Belén Feriche

Sodium bicarbonate and sodium citrate: ergogenic aids?

Numerous studies have used exogenous administration of sodium bicarbonate (NaHCO(3)) and sodium citrate (Na-citrate) in an attempt to enhance human performance. After ingestion of NaHCO(3) and Na-citrate, two observations have been made: (a) There was great individual variability in the ergogenic benefit reached, which can be attributed to the level of physical conditioning of the subjects and to their tolerance of the buffer substance; and (b) the subjects who had ingested NaHCO(3) and Na-citrate show higher levels of pH, bicarbonate, and lactate ions concentrations in their exercising blood than do the subjects who had ingested the placebo. A majority of the studies have suggested that the ingestion of both substances provides an ergogenic effect due to the establishment and maintenance of an elevated pH level during exercise. However, the exact mechanism by which the ergogenic effects occur has not been demonstrated conclusively. Sodium bicarbonate and Na-citrate seem to be effective in activities with a sufficient duration to generate a difference in the hydrogen ion gradient, characterized by a very high intensity and involving large muscular groups. However, in activities of equally high intensity, but with longer duration, the results obtained have been conflicting and inconclusive.

Mediterranean diet and bone mineral density in two age groups of women

We hypothesized that adherence to the Mediterranean diet measured as a Mediterranean diet score (MDS) has a beneficial effect on bone mineral density (BMD). For the purposes of this study, a sample of healthy women from Southern Spain was chosen. Subjects were grouped into two major groups: a first group consisted of women of reproductive age (premenopausal, pre-M) and a second group consisted of postmenopausal women (pos-M). The consumption of vegetables and fruit was found to be significantly related to BMD in both groups of subjects studied. In the pre-M group, the lipid ratio was positively associated with BMD and in pos-M women nuts intake was also associated with BMD. After implementing the analysis of covariance analysis, significant linear trends between the MDS and BMD were observed in all subjects studied. Our results indicate that a varied diet based on Mediterranean diet patterns may be beneficial in the prevention of osteoporosis.

The Effect of Lactate Concentration on the Handgrip Strength During Judo Bouts

Abstract Bonitch-Góngora, JG, Bonitch-Domínguez, JG, Padial, P, and Feriche, B. The effect of lactate concentration on the handgrip strength during judo bouts. J Strength Cond Res 26(7): 1863–1871, 2012—Judo is a combat sport in which the athletes attempt to hold and control their adversary through gripping techniques (kumi-kata) to apply opportune throwing techniques (nage-waza). Twelve male judo athletes, representing national teams, were recruited to investigate the changes in the maximal isometric strength in both hands before (pre) and after (post) 4 judo bouts and its relationship with the maximal blood lactic acid concentration. The subjects performed a maximal isometric contraction with each hand immediately before and after each bout. A blood sample was taken at 1, 3, and 14 minutes after each bout, and the lactic acid concentration was determined. An overall effect of the successive bouts on the maximal isometric handgrip strength of prebouts was observed for both hands (p < 0.05) but not in that of postbouts (p > 0.05). The dominant hand showed an overall decrease in the maximal isometric strength because of the bout, with the decrease being significant for the first, third, and fourth bouts (p < 0.05). The nondominant hand only showed a significant decrease in the first prebout and postbout (p < 0.05). We observed an inverse relationship between the maximal isometric handgrip strength of postbouts and maximum lactic acid concentration (Lacmax), and between the maximal isometric handgrip strength of postbouts and the lactic acid concentration at minute 14 of the recovery period (Lac14) (p < 0.05). These results show that successive judo bouts significantly reduce the maximal isometric strength of both hands and may suggest that fatigue of each hand depends on different factors. An enhanced understanding of the behavior of the isometric handgrip strength, and the factors that affect grip fatigue during judo bouts in the dominant and nondominant hands, can aid coaches in developing optimal training and exercise interventions that are aimed at mitigating decreases in the capacity of judo athletes to perform a grip.

Changes in peak leg power induced by successive judo bouts and their relationship to lactate production

Abstract Eleven male judoka, who compete at national level, were recruited with the aim of investigating changes in peak leg power as a result of successive judo bouts and their relationship with lactate production. The participants executed a force–velocity curve to determine peak power in a 90° squat exercise in concentric work. The group then participated in four 5-min judo bouts each separated by 15 min of passive rest. The power developed as a result of the load associated with the maximum peak power reached in the preliminary test was determined, for the same movement, before and after each bout. Finger capillary blood samples were taken after each bout to determine the maximum lactate concentration achieved and lactate clearance. The results showed no effect of successive bouts on peak leg power (P > 0.05) and no difference when comparing the power measured before and after each bout (P > 0.05). Maximum lactate concentration of the fourth bout was lower than that of the first (12.6 ± 3.5 and 14.6 ± 4 mmol · l−1 respectively; P < 0.05), although there was no difference in their clearance dynamics (P > 0.05). On the basis of the results obtained, we conclude that successive judo bouts, with the structure proposed in this study, produce high acidosis levels, which have no effect on the peak power developed in the legs.

Force–Velocity Relationship of Upper Body Muscles: Traditional Versus Ballistic Bench Press

This study aimed to (1) evaluate the linearity of the force-velocity relationship, as well as the reliability of maximum force (F0), maximum velocity (V0), slope (a), and maximum power (P0); (2) compare these parameters between the traditional and ballistic bench press (BP); and (3) determine the correlation of F0 with the directly measured BP 1-repetition maximum (1RM). Thirty-two men randomly performed 2 sessions of traditional BP and 2 sessions of ballistic BP during 2 consecutive weeks. Both the maximum and mean values of force and velocity were recorded when loaded by 20-70% of 1RM. All force-velocity relationships were strongly linear (r > .99). While F0 and P0 were highly reliable (ICC: 0.91-0.96, CV: 3.8-5.1%), lower reliability was observed for V0 and a (ICC: 0.49-0.81, CV: 6.6-11.8%). Trivial differences between exercises were found for F0 (ES: < 0.2), however the a was higher for the traditional BP (ES: 0.68-0.94), and V0 (ES: 1.04-1.48) and P0 (ES: 0.65-0.72) for the ballistic BP. The F0 strongly correlated with BP 1RM (r: 0.915-0.938). The force-velocity relationship is useful to assess the upper body maximal capabilities to generate force, velocity, and power.

Altitude Training in Elite Swimmers for Sea Level Performance (Altitude Project)

INTRODUCTION This controlled, nonrandomized, parallel-groups trial investigated the effects on performance, V˙O2 and hemoglobin mass (tHbmass) of four preparatory in-season training interventions: living and training at moderate altitude for 3 and 4 wk (Hi-Hi3, Hi-Hi), living high and training high and low (Hi-HiLo, 4 wk), and living and training at sea level (SL) (Lo-Lo, 4 wk). METHODS From 61 elite swimmers, 54 met all inclusion criteria and completed time trials over 50- and 400-m crawl (TT50, TT400), and 100 (sprinters) or 200 m (nonsprinters) at best stroke (TT100/TT200). Maximal oxygen uptake (V˙O2max) and HR were measured with an incremental 4 × 200 m test. Training load was estimated using cumulative training impulse method and session RPE. Initial measures (PRE) were repeated immediately (POST) and once weekly on return to SL (PostW1 to PostW4). tHbmass was measured in duplicate at PRE and once weekly during the camp with CO rebreathing. Effects were analyzed using mixed linear modeling. RESULTS TT100 or TT200 was worse or unchanged immediately at POST, but improved by approximately 3.5% regardless of living or training at SL or altitude after at least 1 wk of SL recovery. Hi-HiLo achieved greater improvement 2 (5.3%) and 4 wk (6.3%) after the camp. Hi-HiLo also improved more in TT400 and TT50 2 (4.2% and 5.2%, respectively) and 4 wk (4.7% and 5.5%) from return. This performance improvement was not linked linearly to changes in V˙O2max or tHbmass. CONCLUSIONS A well-implemented 3- or 4-wk training camp may impair performance immediately but clearly improves performance even in elite swimmers after a period of SL recovery. Hi-HiLo for 4 wk improves performance in swimming above and beyond altitude and SL controls through complex mechanisms involving altitude living and SL training effects.

Effect of acute exposure to moderate altitude on muscle power: hypobaric hypoxia vs. normobaric hypoxia.

When ascending to a higher altitude, changes in air density and oxygen levels affect the way in which explosive actions are executed. This study was designed to compare the effects of acute exposure to real or simulated moderate hypoxia on the dynamics of the force-velocity relationship observed in bench press exercise. Twenty-eight combat sports athletes were assigned to two groups and assessed on two separate occasions: G1 (n = 17) in conditions of normoxia (N1) and hypobaric hypoxia (HH) and G2 (n = 11) in conditions of normoxia (N2) and normobaric hypoxia (NH). Individual and complete force-velocity relationships in bench press were determined on each assessment day. For each exercise repetition, we obtained the mean and peak velocity and power shown by the athletes. Maximum power (Pmax) was recorded as the highest Pmean obtained across the complete force-velocity curve. Our findings indicate a significantly higher absolute load linked to Pmax (∼3%) and maximal strength (1RM) (∼6%) in G1 attributable to the climb to altitude (P<0.05). We also observed a stimulating effect of natural hypoxia on Pmean and Ppeak in the middle-high part of the curve (≥60 kg; P<0.01) and a 7.8% mean increase in barbell displacement velocity (P<0.001). No changes in any of the variables examined were observed in G2. According to these data, we can state that acute exposure to natural moderate altitude as opposed to simulated normobaric hypoxia leads to gains in 1RM, movement velocity and power during the execution of a force-velocity curve in bench press.

Training load quantification in elite swimmers using a modified version of the training impulse method

Abstract Prior reports have described the limitations of quantifying internal training loads using hear rate (HR)-based objective methods such as the training impulse (TRIMP) method, especially when high-intensity interval exercises are performed. A weakness of the TRIMP method is that it does not discriminate between exercise and rest periods, expressing both states into a single mean intensity value that could lead to an underestimate of training loads. This study was designed to compare Banisters original TRIMP method (1991) and a modified calculation procedure (TRIMPc) based on the cumulative sum of partial TRIMP, and to determine how each model relates to the session rating of perceived exertion (s-RPE), a HR-independent training load indicator. Over four weeks, 17 elite swimmers completed 328 pool training sessions. Mean HR for the full duration of a session and partial values for each 50 m of swimming distance and rest period were recorded to calculate the classic TRIMP and the proposed variant (TRIMPc). The s-RPE questionnaire was self-administered 30 minutes after each training session. Both TRIMPc and TRIMP measures strongly correlated with s-RPE scores (r = 0.724 and 0.702, respectively; P < 0.001). However, TRIMPc was ∼9% higher on average than TRIMP (117 ± 53 vs. 107 ± 47; P < 0.001), with proportionally greater inter-method difference with increasing workload intensity. Therefore, TRIMPc appears to be a more accurate and appropriate procedure for quantifying training load, particularly when monitoring interval training sessions, since it allows weighting both exercise and recovery intervals separately for the corresponding HR-derived intensity.

Comparison of the force-, velocity-, and power-time curves recorded with a force plate and a linear velocity transducer

Abstract This study aimed to correlate, compare, and determine the reliability of force, velocity, and power values collected with a force plate (FP) and a linear transducer during loaded jumps. Twenty-three swimmers performed an incremental loading test at 25, 50, 75, and 100% of their own body weight on a FP. A linear velocity transducer (LVT) was attached to the bar to assess the peak and the mean values of force, velocity, and power. Both the peak variables (r = 0.94 – 0.99 for peak force, r = 0.83 – 0.91 for peak velocity, and r = 0.90–0.94 for peak power; p < 0.001) and the mean variables (r = 0.96–0.99 for mean force, r = 0.87–0.89 for mean velocity, and r = 0.93–0.96 for mean power; p < 0.001) were strongly correlated between both measurement tools. Differences in the shape of the force-, velocity-, and power-time curves were observed. The LVT data showed a steeper increase in these variables at the beginning of the movement, while the FP recorded larger values in the latter part. Peak values were more reliable than mean values. These results suggest that the LVT is a valid tool for the assessment of loaded squat jump.

Effect of Different Interrepetition Rest Periods on Barbell Velocity Loss During the Ballistic Bench Press Exercise

Abstract García-Ramos, A, Padial, P, Haff, GG, Argüelles-Cienfuegos, J, García-Ramos, M, Conde-Pipó, J, and Feriche, B. Effect of different interrepetition rest periods on barbell velocity loss during the ballistic bench press exercise. J Strength Cond Res XX(X): 000–000, 2015—This study investigated the effect of introducing different interrepetition rest (IRR) periods on the ability to sustain maximum bench press throw velocity with a range of loads commonly used to develop upper-body power. Thirty-four physically active collegiate men (age: 21.5 ± 2.8 years; body mass: 75.2 ± 7.2 kg; height: 176.9 ± 4.9 cm) were tested during 2 consecutive weeks. During the first week, the maximum dynamic strength (repetition maximum [RM]) in bench press exercise was determined (RM = 76.7 ± 13.2 kg). The following week, 3 testing sessions were conducted with 48 hours apart in random order. In each day of evaluation, only 1 load (30%RM, 40%RM, or 50%RM) was assessed in the bench press throw exercise. With each load, subjects performed 3 single sets of 15 repetitions (15-minute interset rest) with 3 different sets configurations: continuous repetitions (CR), 6 seconds of IRR (IRR6), and 12 seconds of IRR (IRR12). The decrease of peak velocity (PV) was significantly lower for IRR12 compared with CR and IRR6 at least since the repetition 4. No differences between CR and IRR6 protocols were found until the repetition 7 at 30%RM and 40%RM and until the repetition 5 at 50%RM. The decrease of PV during the CR protocol was virtually linear for the 3 loads analyzed (r 2 > 0.99); however, this linear relationship became weaker for IRR6 (r 2 = 0.79–0.95) and IRR12 (r 2 = 0.35–0.87). These results demonstrate that IRR periods allow increasing the number of repetitions before the onset of significant velocity losses.