Berkay Ozcelik

Ultrathin chitosan-poly(ethylene glycol) hydrogel films for corneal tissue engineering

Due to the high demand for donor corneas and their low supply, autologous corneal endothelial cell (CEC) culture and transplantation for treatment of corneal endothelial dysfunction would be highly desirable. Many studies have shown the possibility of culturing CECs in vitro, but lack potential robust substrates for transplantation into the cornea. In this study, we investigate the properties of novel ultrathin chitosan-poly(ethylene glycol) (PEG) hydrogel films (CPHFs) for corneal tissue engineering applications. Cross-linking of chitosan films with diepoxy-PEG and cystamine was employed to prepare ~50 μm (hydrated) hydrogel films. Through variation of the PEG content (1.5-5.9 wt.%) it was possible to tailor the CPHFs to have tensile strains and ultimate stresses identical to or greater than those of human corneal tissue while retaining similar tensile moduli. Light transmission measurements in the visible spectrum (400-700 nm) revealed that the films were >95% optically transparent, above that of the human cornea (maximum ~90%), whilst in vitro degradation studies with lysozyme revealed that the CPHFs maintained the biodegradable characteristics of chitosan. Cell culture studies demonstrated the ability of the CPHFs to support the attachment and proliferation of sheep CECs. Ex vivo surgical trials on ovine eyes demonstrated that the CPHFs displayed excellent characteristics for physical manipulation and implantation purposes. The ultrathin CPHFs display desirable mechanical, optical and degradation properties whilst allowing attachment and proliferation of ovine CECs, and as such are attractive candidates for the regeneration and transplantation of CECs, as well as other corneal tissue engineering applications.

Epoxy-amine synthesised hydrogel scaffolds for soft-tissue engineering

Highly porous and biodegradable hydrogels based on poly(ethylene glycol) (PEG) and cystamine (Cys) were fabricated using epoxy-amine chemistry and investigated as scaffolds for soft-tissue engineering. Whereas the application of fused-salt templates provided a comprehensive interconnecting pore morphology, the incorporation of a specially designed poly(epsilon-caprolactone) (PCL) cross-linker provided enhanced mechanical function without adversely effecting the scaffolds positive biological interactions. The addition of only 1.2 wt% of the PCL cross-linker was sufficient to provide improvements in the ultimate stress of 30-40%. In vitro studies not only confirmed the non-cytotoxic nature of the scaffolds, but also their degradation products, which were isolated and characterised by nuclear magnetic resonance (NMR) and matrix-assisted laser desorption/ionisation time-of-flight mass spectroscopy (MALDI ToF MS). In vivo trials were conducted over a period of 8 weeks through implantation of the scaffolds into the dorsal region of rats. At both 2 and 8 week time points the explants revealed complete infiltration by the surrounding tissue and the development of a vascular network to support the newly generated tissue, without an excessive foreign-body response.

Biodegradable and biocompatible poly(ethylene glycol)-based hydrogel films for the regeneration of corneal endothelium.

Corneal endothelial cells (CECs) are responsible for maintaining the transparency of the human cornea. Loss of CECs results in blindness, requiring corneal transplantation. In this study, fabrication of biocompatible and biodegradable poly(ethylene glycol) (PEG)-based hydrogel films (PHFs) for the regeneration and transplantation of CECs is described. The 50-μm thin hydrogel films have similar or greater tensile strengths to human corneal tissue. Light transmission studies reveal that the films are >98% optically transparent, while in vitro degradation studies demonstrate their biodegradation characteristics. Cell culture studies demonstrate the regeneration of sheep corneal endothelium on the PHFs. Although sheep CECs do not regenerate in vivo, these cells proliferate on the films with natural morphology and become 100% confluent within 7 d. Implantation of the PHFs into live sheep corneas demonstrates the robustness of the films for surgical purposes. Regular slit lamp examinations and histology of the cornea after 28 d following surgery reveal minimal inflammatory responses and no toxicity, indicating that the films are benign. The results of this study suggest that PHFs are excellent candidates as platforms for the regeneration and transplantation of CECs as a result of their favorable biocompatibility, degradability, mechanical, and optical properties.

Highly porous and mechanically robust polyester poly(ethylene glycol) sponges as implantable scaffolds

The development of suitable scaffolds plays a significant role in tissue engineering research. Although scaffolds with promising features have been produced via a variety of innovative methods, there are no fully synthetic tissue engineering scaffolds that possess all the desired properties in one three-dimensional construct. Herein, we report the development of novel polyester poly(ethylene glycol) (PEG) sponges that display many of the desirable scaffold characteristics. Our novel synthetic approach utilizes acidchloride/alcohol chemistry, whereby the reaction between a hydroxyl end-functionalized 4-arm PEG and sebacoyl chloride resulted in cross-linking and simultaneous hydrogen chloride gas production, which was exploited for the in situ formation of highly interconnected pores. Variation of the fabrication conditions, including the precursor volume and concentration, allowed the pore size and structure as well as the compressive properties to be tailored. The sponges were found to possess excellent elastic properties, preserving their shape even after 80% compressive strain without failure. The benign properties of the sponges were demonstrated in an in vivo subcutaneous rat model, which also revealed uniform infiltration of vascularized tissue by 8 weeks and complete degradation of the sponges by 16 weeks, with only a minimal inflammatory response being observed over the course of the experiments.

Crosslinked Platform Coatings Incorporating Bioactive Signals for the Control of Biointerfacial Interactions

Control over biointerfacial interactions on material surfaces is of significant interest in many biomedical applications and extends from the modulation of protein adsorption and cellular responses to the inhibition of bacterial attachment and biofilm formation. Effective control over biointerfaces is best achieved by reducing nonspecific interactions on the surface while also displaying specific bioactive signals. A poly(ethylene glycol) (PEG)-based multifunctional coating has been developed that provides effective reduction of protein fouling while enabling covalent immobilization of peptides in a one or two-step manner. The highly protein resistant properties of the coating, synthesized via the crosslinking of PEG diepoxide and diaminopropane, are confirmed via europium-labeled fibronectin adsorption and cell attachment assays. The ability to covalently incorporate bioactive signals is demonstrated using the cyclic peptides cRGDfK and cRADfK. L929 cells show enhanced attachment on the biologically active cRGDfK containing surfaces, while the surface remains nonadhesive when the nonbiologically active cRADfK peptide is immobilized. The crosslinked PEG-based coating also demonstrates excellent resistance toward Staphylococcus aureus attachment in a 48 h biofilm assay, achieving a >96% reduction compared to the control surface. Additionally, incorporation of the antimicrobial peptide melimine during coating formation further significantly decreases biofilm formation (>99%).

Biocompatible Porous Polyester-Ether Hydrogel Scaffolds with Cross-Linker Mediated Biodegradation and Mechanical Properties for Tissue Augmentation

Porous polyester-ether hydrogel scaffolds (PEHs) were fabricated using acid chloride/alcohol chemistry and a salt templating approach. The PEHs were produced from readily available and cheap commercial reagents via the reaction of hydroxyl terminated poly(ethylene glycol) (PEG) derivatives with sebacoyl, succinyl, or trimesoyl chloride to afford ester cross-links between the PEG chains. Through variation of the acid chloride cross-linkers used in the synthesis and the incorporation of a hydrophobic modifier (poly(caprolactone) (PCL)), it was possible to tune the degradation rates and mechanical properties of the resulting hydrogels. Several of the hydrogel formulations displayed exceptional mechanical properties, remaining elastic without fracture at compressive strains of up to 80%, whilst still displaying degradation over a period of weeks to months. A subcutaneous rat model was used to study the scaffolds in vivo and revealed that the PEHs were infiltrated with well vascularised tissue within two weeks and had undergone significant degradation in 16 weeks without any signs of toxicity. Histological evaluation for immune responses revealed that the PEHs incite only a minor inflammatory response that is reduced over 16 weeks with no evidence of adverse effects.

Hydrogel Materials for Tissue Engineering

So what do artificially hydrated materials hold for the future? This book is a great introduction to hydrated materials, presenting academic and practical content that gives a feel of theoretical as well as real-world problems.

Non-lamellar lyotropic liquid crystalline nanoparticles enhance the antibacterial effects of rifampicin against Staphylococcus aureus

The fight against infection in an era of emerging antibiotic resistant bacteria is one of the grandest scientific challenges facing society today. Nano-carriers show great promise in improving the antibacterial activity of antibiotics as they are able to enhance their solubility, provide sustained release and reduce toxic side effects via specifically targeting infection sites. Here, we investigate the antibacterial effect of two lipidic nano-carriers that contain the poorly soluble antibiotic rifampicin in their bilayers. One nanoparticle is assembled solely from the lipid monoolein, thus is neutral at physiological pH and the other contains a mixture of monoolein and the cationic lipid N-[1-(2,3-Dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl-sulfate (DOTAP), thus is positively charged. Our results show that rifampicin-loaded nanoparticles reduce the minimum inhibitory concentration against Staphylococcus aureus compared to rifampicin alone, however this reduction was most pronounced for the positively charged nanoparticles. Fluorescent microscopy revealed binding of all nanoparticles to the bacteria and enhanced binding was observed for the charged nanoparticles. This suggests that the cationic lipids promote electrostatic interactions with the negatively charged bacterial membrane. Förster resonance energy transfer demonstrated that the cationic charged nanoparticles were able to fuse with bacterial membranes whilst atomic force microscopy and transmission electron microscopy revealed structural damage to the bacterial membranes caused by the nanoparticles. Significantly, we identified a concentration window in which the nanoparticles exhibited antibacterial activity while not affecting HeLa and CHO cell viability. This ability to improve the efficacy of antibiotics without affecting their eukaryotic cytotoxicity is of significant importance for future development of nanomedicine based strategies to combat infections.

Tough and hierarchical porous cryogel scaffolds preparation using n-butanol as a non-solvent

ABSTRACT Hierarchical porous chitosan cryogels were prepared by combination of cryogelation and phase separation techniques. n-Butanol was included as a non-solvent in the initial polymer solutions to enable phase separation. The internal morphology of the resulting cryogels revealed hierarchical porosity where larger pores of between 25–50 µm were formed via cryogelation, whereas smaller pores of between 4–10 µm were produced by phase separation. The control sample prepared without n-butanol exhibited monotype porosity. Any crack development was not observed when samples were compressed up to 80% strain. The results demonstrated hierarchical porous and tough scaffolds with potential use in tissue engineering. GRAPHICAL ABSTRACT

In vivo studies of biocompatible PEG-based hydrogel scaffolds with biofactors

The development of macroporous PEG-based hydrogel scaffolds for soft tissue implantation was investigated. It is aimed that the incorporation of several types of biofactors, particularly extracellular matrices (e.g., Matrigel and Myogel) into the hydrogel scaffolds will induce the formation of adipoctyes and therefore will have potential in breast reconstruction application. This is due to the promising result obtained where by incorporation of these mentioned extracellular matrices could induced the formation of adipoctyes in different hydrogel systems. Therefore, in vivo studies of scaffolds filled with either Matrigel or Myogel with incorporation of growth factors (bFGF) were prepared and implanted in rats for duration of 8 weeks and then explanted for analysis (staining by defined protocols for hematoxylin and eosin (H&E) and for rat macrophages (ED-1)). Results showed no sign of adipoctyes even after 8 weeks of implantation. However, the modification did marginally enhance the formation of tissue (e.g., higher density of cells and tissue) within the scaffolds in comparison to the unmodified scaffold with the occurrence of more macrophages and foreign body giant cells (FBGCs). Importantly, the modified scaffolds also maintained a mild to moderate inflammatory response at prolonged implantation periods. In summary, these positive results showed promising properties of scaffolds and have potential as implant for wider applications in soft tissue replacement.