Bernhard Pommer

Impact of dental implant length on early failure rates: a meta-analysis of observational studies

AIM To test the null hypothesis of no difference in failure rates of short (minimum length: 7 mm) and longer dental implants (≥ 10 mm), a meta-analysis was performed on prospective observational trials. MATERIALS AND METHODS A systematic electronic and hand search was performed to identify eligible studies. Having additional data supplied by the authors, 54 publications were included (19,083 implants). RESULTS In case of mandibular implants, the null hypothesis of no impact of reduced implant length on failure within the first year of prosthetic loading could not be rejected. A significant impact of implant length could be substantiated for short machined implants in the anterior [odds ratio (OR) 5.4] and posterior maxilla (OR 3.4), while short rough-surfaced implants demonstrated increased failure rates in the anterior maxillary sites. No influence of implant diameter and denture type on the failure rate of short implants could be revealed. CONCLUSION In areas of reduced alveolar bone height the use of short dental implants may reduce the need for invasive bone augmentation procedures.

Mechanical properties of the Schneiderian membrane in vitro

OBJECTIVES Perforation of the Schneiderian membrane (maxillary sinus mucosa) is a common complication of maxillary sinus graft procedures. Membrane perforation increases the chance of postoperative sinusitis and endangers graft as well as implant survival. The aim of the present study was to explore the mechanical properties of the Schneiderian membrane. MATERIAL AND METHODS Three test methods were performed on sinus specimen of 20 fresh human cadavers: one- and two-dimensional membrane elongation as far as perforation, as well as membrane detachment from the adherent bone. RESULTS Perforation of the Schneiderian membrane (mean thickness: 90 mum) occurred at a mean tension of 7.3 N/mm(2). The membrane could be stretched to 132.6% of its original size in one-dimensional elongation, and to 124.7% in two-dimensional elongation. Thicker membranes demonstrated significantly higher load limits (P<0.001). The mean modulus of elasticity accounted 0.058 GPa, the mean adhesion force between sinus membrane and bone surface was 0.05 N/mm. CONCLUSIONS Respecting the mechanical properties of the Schneiderian membrane may help reducing the complication rates and thus patient morbidity in minimally invasive maxillary sinus floor elevation.

Long-term implant success at the Academy for Oral Implantology: 8-year follow-up and risk factor analysis

Purpose Rehabilitation of the incomplete dentition by means of osseointegrated dental implants represents a highly predictable and widespread therapy; however, little is known about potential risk factors that may impair long-term implant success. Methods From 2004 to 2012, a total of 13,147 implants were placed in 4,316 patients at the Academy for Oral Implantology in Vienna. The survival rates after 8 years of follow-up were computed using the Kaplan-Meier method, and the impact of patient- and implant-related risk factors was assessed. Results Overall implant survival was 97% and was not associated with implant length (P=0.930), implant diameter (P=0.704), jaw location (P=0.545), implant position (P=0.450), local bone quality (P=0.398), previous bone augmentation surgery (P=0.617), or patient-related factors including osteoporosis (P=0.661), age (P=0.575), or diabetes mellitus (P=0.928). However, smoking increased the risk of implant failure by 3 folds (P<0.001) and a positive history of periodontal disease doubled the failure risk (P=0.001). Conclusions Summing up the long-term results of well over 10,000 implants at the Academy for Oral Implantology in Vienna it can be concluded that there is only a limited number of patients that do not qualify for implant therapy and may thus not benefit from improved quality of life associated with fixed implant-retained prostheses. Graphical Abstract

New safety margins for chin bone harvesting based on the course of the mandibular incisive canal in CT

OBJECTIVES Altered pulp sensitivity of anterior lower teeth is a frequent finding following chin bone harvesting. Persistent loss of tooth sensitivity has been reported in up to 20% of the patients. The aim of this study was to evaluate current recommendations for the location of the harvest zone with respect to the course of the mandibular incisive canal (MIC), the intrabony continuation of the mandibular canal mesial to the mental foramen. MATERIAL AND METHODS On computed tomographic (CT) scans of 50 dentate mandibles, the MIC was located and its distance to the root apices, to the labial bony surface, and to the inferior margin of the mandible was assessed. The risk of nerve injury and the percentage of patients suitable for chin bone grafting were calculated. RESULTS Respecting current recommendations for chin bone grafting, the content of the MIC was endangered in 57% of the CTs. Therefore, new safety margins are suggested: the chin bone should be harvested at least 8 mm below the tooth apices with a maximum harvest depth of 4 mm. CONCLUSIONS Applying the new safety recommendations and proper patient selection in chin bone harvesting could reduce the risk of altered postoperative tooth sensitivity due to injury of the mandibular incisive nerve.

Prevalence, location and morphology of maxillary sinus septa: systematic review and meta-analysis

AIM To gain further insights and resolve conflicting results in the literature regarding prevalence, predominant location and morphologic variability of maxillary sinus septa. MATERIAL AND METHODS Electronic and hand searching of English literature identified 33 investigations published from 1995 to 2011. Septa were defined as at least 2-4 mm in height. RESULTS Septa were present in 28.4% of 8923 sinuses investigated (95% confidence interval: 24.3-32.5%). Prevalence was significantly higher in atrophic sinuses compared with dentate maxillae (p < 0.001). Septa were located in premolar, molar and retromolar regions in 24.4%, 54.6% and 21.0% respectively. Orientation of septa was transverse in 87.6%, sagittal in 11.1% and horizontal in 1.3% of cases. Septa height measured 7.5 mm on average. Complete septa (dividing the sinus into two separate cavities) were found in only 0.3%. Other rare conditions included multiple septa in one sinus (4.2%) and bilateral septa (17.2%). Septa diagnosis using panoramic radiographs yielded incorrect results in 29% of cases. CONCLUSIONS In view of their high overall prevalence and significant morphologic variability, 3D radiographic imaging prior to sinus floor augmentation may help to reduce complication rates in the presence of maxillary sinus septa.

Esthetic evaluation of single-tooth implants in the anterior maxilla following autologous bone augmentation.

OBJECTIVES Autologous bone augmentation to rebuild compromised alveolar ridge contour prior to implant placement allows for favorable three-dimensional implant positioning to achieve optimum implant esthetics. The aim of the present study was to evaluate peri-implant soft tissue conditions around single-tooth implants following bone grafts in the esthetic zone of the maxilla. MATERIALS AND METHODS Sixty patients underwent autologous bone augmentation of deficient maxillary sites prior to placement of 85 implants in the esthetic zone. In case of multiple implants per patient, one implant was randomly selected. Objective evaluation of 60 single-tooth implants was performed using the Pink-Esthetic-Score (PES) and Papilla Index (PI) and supplemented by subjective patient evaluation, as well as clinical and radiologic examination. RESULTS Objective ratings of implant esthetics were satisfactory (median PES: 11, median PI: 2) and significantly correlated with high patient satisfaction (mean VAS score: 80%). Both esthetic indices demonstrated respectable levels of inter- as well as intra-observer agreement. Poor implant esthetics (low PES and PI ratings) were significantly associated with increased anatomic crown height, while no influence of horizontal implant-tooth distance could be found. CONCLUSIONS The present investigation indicates that favorable esthetic results may be achieved in the augmented anterior maxilla. However, bony reconstruction of compromised alveolar ridges does not guarantee optimum implant esthetics.

Does Timing of Implant Placement Affect Implant Therapy Outcome in the Aesthetic Zone? A Clinical, Radiological, Aesthetic, and Patient‐Based Evaluation

PURPOSE To compare five different implant treatment protocols in the anterior maxilla, including immediate, early, and delayed implant placement, as well as implant placement in conjunction with simultaneous guided bone regeneration and implant placement 3 months following horizontal autologous bone block grafting. MATERIAL AND METHODS Aesthetic indices used included the Pink Esthetic Score (PES), Papilla Index (PI), Subjective Esthetic Score (SES), and White Esthetic Score (WES). Subjective evaluation of implant aesthetics was performed using a visual analogue scale (VAS). The VAS consisted of a 10 cm-long line representing the degree of discontent (0%) or satisfaction (100%). RESULTS A total of 153 implants in 153 patients (80 women, 73 men) were evaluated after a mean follow-up of 4.5 ± 2.9 years. Mean peri-implant bone loss was 1.6 ± 0.9 mm and not affected by treatment protocol, time after implant placement, or crown length. Papilla presence, by contrast, differed significantly between the protocols: Papilla formation was more pronounced following delayed and immediate implant placement. No statistical significance was found among treatment modalities with regard to PES, SES, or WES. Longer crowns were associated with lower PES and PI ratings and correlated with greater midfacial recession. SES was also influenced by time after implant placement and keratinized mucosa. Patient satisfaction differed significantly among treatment protocols, favoring immediate implant placement. Agreement between objective and subjective aesthetic ratings was low. CONCLUSION The present study suggests that comparable clinical, radiological, and aesthetic results can be achieved with all treatment protocols. Gingival recession, however, seems to occur in the long term irrespective of the technique used.

Primary implant stability in the atrophic sinus floor of human cadaver maxillae: impact of residual ridge height, bone density, and implant diameter

OBJECTIVES Simultaneous implant placement in conjunction with lateral or transcrestal maxillary sinus floor augmentation gives the benefit of reduction in healing times and surgical interventions. Primary implant stability, however, may be significantly reduced in resorbed residual ridges. Aim of the present study was to investigate the impact of residual bone height, bone density, and implant diameter on primary stability of implants in the atrophic sinus floor. MATERIAL AND METHODS A total of 66 NobelActive implants were inserted in the sinus floor of fresh human cadaver maxillae: 22 narrow (3.5 mm), 22 regular (4.3 mm), and 22 wide (5.0 mm) diameter implants in residual ridges of 2-6 mm height. Presurgical computed tomographic scans were acquired to assess bone height and density. Primary implant stability was evaluated by insertion torque values (ITV), Periotest values (PTV), and Osstell implant stability quotients (ISQ). RESULTS Correlations within outcomes (ITV, PTV, ISQ) were highly significant (P < 0.001). Radiographic bone density was found to significantly impact all three outcome measures (P < 0.001), while no influence of residual bone height and implant diameter could be revealed by multifactorial analysis. Consistent results were seen in all subgroups (including residual ridges of 5-6 mm height). CONCLUSIONS Bone density seems to represent the major determinant of primary stability in maxillary sinus augmentation with simultaneous implant placement (as well as 5-6 mm short implants in the maxillary sinus floor). Preoperative bone density assessment may help to avoid stability-related complications in one-stage implant treatment of the atrophic posterior maxilla.

Effect of Maxillary Sinus Floor Augmentation on Sinus Membrane Thickness in Computed Tomography

BACKGROUND Little is known about maxillary sinus compliance, i.e., the intrinsic potential of the sinus membrane to resume its homeostatic status after the surgical trauma caused by sinus floor elevation. The aim of the present study is to investigate the effect of maxillary sinus floor augmentation on sinus membrane thickness. METHODS Within-patient comparison of computed tomographic scans before bone grafting versus 4 to 6 months after bone grafting was performed. Changes in membrane thickness were evaluated in 65 maxillary sinus floor augmentation procedures via a lateral approach in 35 patients without clinical signs of sinus pathology at any time. RESULTS Sinus membrane thickness differed significantly before (0.8 ± 1.2 mm) versus after (1.5 ± 1.3 mm) augmentation surgery (P <0.001), with a mean increase of 0.8 ± 1.6 mm (maximum: 4.4 mm). Only 28% of augmented sinuses did not show membrane thickening. In non-augmented control sinuses, there was no evidence of membrane thickness increase. CONCLUSIONS The results indicate that the maxillary sinus membrane, even in healthy clinical conditions, undergoes morphologic modifications after sinus floor elevation, yet membrane reactions demonstrate significant variability. Future research on the effect of augmentation surgery on maxillary sinus physiology is recommended.

Influence of Prosthetic Parameters on Peri-Implant Bone Resorption in the First Year of Loading: A Multi-Factorial Analysis

BACKGROUND The first year of prosthetic loading is crucial to peri-implant bone levels; however, contributing factors are yet barely understood. PURPOSE The purpose of the study is to investigate the influence of patient-, implant-, and prosthetic-related parameters on marginal bone resorption in partially edentulous patients within the first year of prosthetic loading. MATERIALS AND METHODS This retrospective multifactorial analysis involved the following influencing factors: patient gender and age, implant diameter, implant location and neck design, insertion torque, insertion depth, splinted versus single-tooth restorations, crown height space, and crown-to-implant ratio. RESULTS Mean peri-implant bone resorption around 200 dental implants was 0.98 ± 0.76 mm and significantly correlated to higher implant insertion depth (p < .001), whereas no association to prosthetic parameters could be observed. CONCLUSIONS Within the limits of the present analysis, it can be concluded that apical implant positioning may constitute a relevant determinant of early peri-implant bone resorption.