Bernhard Stanje

Li ion dynamics along the inner surfaces of layer-structured 2H-LixNbS2.

Layer-structured materials, such as graphite (LiCy) or Lix(Co,Ni,Mn)O2, are important electrode materials in current battery research that still relies on insertion materials. This is due to their excellent ability to reversibly accommodate small alkali ions such as Li(+) and Na(+). Despite of these applications, microscopic information on Li ion self-diffusion in transition metal sulfides are relatively rare. Here, we used (7)Li nuclear magnetic resonance (NMR) spectroscopy to study translational Li ion diffusion in hexagonal (2H) LixNbS2 (x = 0.3, 0.7, and 1) by means of variable-temperature NMR relaxometry. (7)Li spin-lattice relaxation rates and (7)Li NMR spectra were used to determine Li jump rates and activation barriers as a function of Li content. Hereby, NMR spin-lattice relaxation rates recorded with the spin-lock technique offered the possibility to study Li ion dynamics on both the short-range and long-range length scale. Information was extracted from complete diffusion-induced rate peaks that are obtained when the relaxation rate is plotted vs inverse temperature. The peak maximum of the three samples studied shifts toward higher temperatures with increasing Li content x in 2H-LixNbS2. Information on the dimensionality of the diffusion process was experimentally obtained by frequency dependent Rρ measurements carried out at T = 444 K, that is in the high-temperature regime of the rate peaks. A slight, but measurable frequency-dependence within this limit is found for all samples; it is in good agreement with predictions from relaxation models developed to approximate low-dimensional (2D) jump diffusion.

Synthesis, Crystal Structure, and Stability of Cubic Li7–xLa3Zr2–xBixO12

Li oxide garnets are among the most promising candidates for solid-state electrolytes in novel Li ion and Li metal based battery concepts. Cubic Li7La3Zr2O12 stabilized by a partial substitution of Zr4+ by Bi5+ has not been the focus of research yet, despite the fact that Bi5+ would be a cost-effective alternative to other stabilizing cations such as Nb5+ and Ta5+. In this study, Li7–xLa3Zr2–xBixO12 (x = 0.10, 0.20, ..., 1.00) was prepared by a low-temperature solid-state synthesis route. The samples have been characterized by a rich portfolio of techniques, including scanning electron microscopy, X-ray powder diffraction, neutron powder diffraction, Raman spectroscopy, and 7Li NMR spectroscopy. Pure-phase cubic garnet samples were obtained for x ≥ 0.20. The introduction of Bi5+ leads to an increase in the unit-cell parameters. Samples are sensitive to air, which causes the formation of LiOH and Li2CO3 and the protonation of the garnet phase, leading to a further increase in the unit-cell parameters. The incorporation of Bi5+ on the octahedral 16a site was confirmed by Raman spectroscopy. 7Li NMR spectroscopy shows that fast Li ion dynamics are only observed for samples with high Bi5+ contents.

Nanostructured Ceramics: Ionic Transport and Electrochemical Activity

Abstract Ceramics with nm-sized dimensions are widely used in various applications such as batteries, fuel cells or sensors. Their oftentimes superior electrochemical properties as well as their capabilities to easily conduct ions are, however, not completely understood. Depending on the method chosen to prepare the materials, nanostructured ceramics may be equipped with a large area fraction of interfacial regions that exhibit structural disorder. Elucidating the relationship between microscopic disorder and ion dynamics as well as electrochemical performance is necessary to develop new functionalized materials. Here, we highlight some of the very recent studies on ion transport and electrochemical properties of nanostructured ceramics. Emphasis is put on TiO2 in the form of nanorods, nanotubes or being present as mesoporous material. Further examples deal with nanocrystalline peroxides such as Li2O2 or nanostructured oxides (Li2TiO3, LiAlO2, LiTaO3, Li2CO3 and Li2B4O7). These materials served as model systems to explore the influence of ball-milling on overall ionic transport.

Solid-State NMR to Study Translational Li Ion Dynamics in Solids with Low-Dimensional Diffusion Pathways

Abstract Fundamental research on lithium ion dynamics in solids is important to develop functional materials for, e.g. sensors or energy storage systems. In many cases a comprehensive understanding is only possible if experimental data are compared with predictions from diffusion models. Nuclear magnetic resonance (NMR), besides other techniques such as mass tracer or conductivity measurements, is known as a versatile tool to investigate ion dynamics. Among the various time-domain NMR techniques, NMR relaxometry, in particular, serves not only to measure diffusion parameters, such as jump rates and activation energies, it is also useful to collect information on the dimensionality of the underlying diffusion process. The latter is possible if both the temperature and, even more important, the frequency dependence of the diffusion-induced relaxation rates of actually polycrystalline materials is analyzed. Here we present some recent systematic relaxometry case studies using model systems that exhibit spatially restricted Li ion diffusion. Whenever possible we compare our results with data from other techniques as well as current relaxation models developed for 2D and 1D diffusion. As an example, 2D ionic motion has been verified for the hexagonal form of LiBH4; in the high-temperature limit the diffusion-induced 7Li NMR spin-lattice relaxation rates follow a logarithmic frequency dependence as is expected from models introduced for 2D diffusion. A similar behavior has been found for LixNbS2. In Li12Si7 a quasi-1D diffusion process seems to be present that is characterized by a square root frequency dependence and a temperature behavior of the 7Li NMR spin-lattice relaxation rates as predicted. Most likely, parts of the Li ions diffuse along the Si5 rings that form chains in the Zintl phase.