Beverly Stewart

Solid‐State Gas Sensors Developed from Functional Difluoroboradiazaindacene Dyes

This article describes the synthesis and characterization of several new difluoroboradiazaindacene (BODIPY) dyes functionalized at the central 8-position by a phenyliodo, phenylheptynoate or phenylheptynoic fragment and at the 3- or 3/5-position(s) by 4-dimethylaminophenylstyryl residue(s). Single-crystal structural determinations confirm the planarity of the dyes, while the absorption and fluorescence spectroscopic properties are highly sensitive to the state of protonation (or alkylation) of the terminal anilino donor group(s). Reversible color tuning from green to blue for absorption and from colorless (i.e., near-IR region) to red for fluorescence is obtained on successive addition of acid and base. The difunctionalized derivative is especially interesting in this respect and shows two well-resolved pK(a) values of 5.10 and 3.04 in acetonitrile. Addition of the first proton causes only small spectral changes and deactivates the molecule towards addition of the second proton. It is this latter step that accommodates the large change in absorption and emission properties, due to the reversible extinction of the intramolecular charge-transfer character inherent to this type of dye. The main focus of the work is the covalent anchoring of the dyes to inert, porous polyacrylate beads so as to form a solid-state sensor suitable for analysis of gases or flowing liquids. The final material is highly stable--its performance is undiminished after more than one year--and fully reversible over many cycles. The sensitivity is such that reactions can be followed by the naked eye and the detection limit is about 600 ppb for HCl and about 80 ppb for ammonia. Trace amounts of diphosgene can be detected, as can alkylating agents. The sensing action is indiscriminate and also operates when the beads are dispersed in aqueous media.

Air-stable, highly fluorescent primary phosphanes.

Light without fright: a synthetic route to fluorescent primary phosphanes (RPH(2)) that are resistant to air oxidation both in the solid state and in chloroform solution is described. These versatile precursors undergo hydrophosphination to give tripodal ligands and subsequently fluorescent transition-metal complexes.

Taming functionality: easy-to-handle chiral phosphiranes

Enantiopure chiral phosphiranes possessing a binaphthyl backbone demonstrate remarkable thermal stability, are highly resistant to air-oxidation and are effective ligands in catalytic asymmetric hydrosilylations.

Interactions of a zwitterionic thiophene-based conjugated polymer with surfactants

In this paper we investigate the optical and structural properties of a zwitterionic poly[3-(N-(4-sulfonato-1-butyl)-N,N-diethylammonium)hexyl-2,5-thiophene] (P3SBDEAHT) conjugated polyelectrolyte (CPE) and its interaction in water with surfactants, using absorption, photoluminescence (PL), electrical conductivity, molecular dynamics simulations (MDS) and small-angle X-ray scattering (SAXS). Different surfactants were studied to evaluate the effect of the head group and chain length on the self-assembly. PL data emphasize the importance of polymer–surfactant electrostatic interactions in the formation of complexes. Nevertheless, conductivity and MDS data have shown that nonspecific interactions also play an important role. These seem to be responsible for the spatial position of the surfactant tail in the complex and, eventually, for breaking-up P3SBDEAHT aggregates. SAXS measurements on P3SBDEAHT-zwitterionic cocamidopropyl betaine (CAPB) surfactant complexes showed a specific structural organization of the system. The CAPB surfactant promotes a structural transition from pure P3SBDEAHT 3-dimensional aggregates (radius of gyration ∼85 A) to thick cylindrical aggregates (∼20 A) where all CAPB molecules are associated with the polymer. For molar ratios (in terms of the polymer repeat unit) >1 the SAXS interference maximum of the complexes resembles that of pure CAPB thus suggesting ongoing phase segregation in the formation of a “pure” CAPB phase.

Accessing molecular memory via a disulfide switch

Herein we describe the results of a combined theoretical and spectroscopic investigation into the design of a simple molecular system intended to act as a memory storage bank. The main operating principle revolves around the two-electron reduction of an aryl disulfide bond. Addition of the first electron leads to elongation of the S–S bond but it breaks only if there is accompanying protonation. Adding a second electron causes S–S bond cleavage, with or without protonation. The structural changes have been assessed by way of quantum chemical calculations and molecular dynamics simulations. Electrochemical studies show that the two-electron reduced product can be re-oxidised at mildly anodic potentials and the cycle can be repeated many times. Both theory and experiment point towards pronounced potential inversion whereby the second reduction potential lies at a significantly more positive potential than that for the first step. Computer simulations of the cyclic voltammograms give rise to numerical values for the reduction potentials that are in quite good agreement with the computed values and also allow determination of the electrochemical rate constants and transfer coefficients. Accurate simulation of the experimental data can be realised only if one proton accompanies the second reduction step. The possibility to design an effective molecular-scale memory device around this system is discussed briefly.

Air-stable chiral primary phosphines part (ii) predicting the air-stability of phosphines

This article reviews recent research from our group on the development of a DFT-based model which has thus far proven capable of predicting and rationalizing the air-stablility/sensitivity of many structurally diverse primary phosphines (RPH2). Furthermore, it also replicates the general trend of increasing resistance to air oxidation upon going from primary phosphines to their tertiary counterparts for a given R group. The model successfully predicted the behaviour of BodPH2, a previously unknown compound, and the first highly fluorescent, air-stable primary phosphine.

Self-assembled systems of water soluble metal 8-hydroxyquinolates with surfactants and conjugated polyelectrolytes

We have studied the interaction of 8-hydroxyquinoline-5-sulfonate (8-HQS) with the metal ions Al(iii) and Zn(ii) in aqueous solution in the presence of tetraalkylammonium surfactants using UV/vis absorption, fluorescence, NMR spectroscopy and electrical conductivity measurements, complemented by DFT calculations and molecular dynamics (MD) simulations. Under appropriate conditions, complexes between 8-HQS and metal ions form rapidly, and have similar electronic, spectroscopic and photophysical properties to the corresponding metal quinolates, such as Alq3. These interact with the cationic surfactants, leading to marked increases in fluorescence intensity. However, significant differences are seen in the behavior of the two metal ions. With aluminium, a stable [Al(8-QS)3](3-) anion is formed, and interacts, predominantly through electrostatic interactions, with the surfactant, without disrupting the metal ion coordination sphere. In contrast, with Zn(ii), there is a competition between the metal ion and surfactants in the interaction with 8-HQS, although the [Zn(8-QS)2(H2O)2](2-) species is stable at appropriate pH and surfactant concentration. The studies are extended to systems with the conjugated polyelectrolyte (CPE) poly-(9,9-bis(6-N,N,N-trimethylammonium)hexyl)-fluorene-phenylene bromide (HTMA-PFP), which has a similar alkylammonium chain to the surfactants. Mixing metal salt, 8-HQS and HTMA-PFP in the presence of a nonionic surfactant leads to the formation of a metal complex/CPE supramolecular assembly between the conjugated polyelectrolyte and the metal/8-HQS complex, as demonstrated by electronic energy transfer. The potential of these systems in sensing, light harvesting, and electron injection/transport layers in organic semiconductor devices is discussed.

Chapter 3:Air-stable, fluorescent primary phosphines

This article reviews recent findings from our research group on the preparation and utility of fluorescent primary phosphines based on the boron dipyrromethene (Bodipy) skeleton. Remarkably, these new phosphines are air-stable in both the neat state and in solution, by virtue of the extended conjugation in the Bodipy backbone – these findings are also in agreement with our DFT model. The ligands’ optical properties and their coordination to molybdenum carbonyl complexes are investigated; interestingly the presence of the −PH2 moiety on the Bodipy dye has a minimal effect on the absorption and emission profile of both the ligands and their transition metal complexes. The primary phosphines also undergo the hydrophosphination reaction to give fluorescent tridentate ligands and subsequently rhenium complexes, which are attractive analogues of dual diagnostic imaging agents. Finally, the current status of Bodipy phosphine dyes is reviewed.

Molecular Dynamics Study of Self-Assembly of Aqueous Solutions of Poly[9,9-bis(4-Sulfonylbutoxyphenylphenyl) Fluorene-2,7-diyl-2,2’-Bithiophene] (PBS-PF2T) in the Presence of Pentaethylene Glycol Monododecyl Ether (C12E5)

Results are presented using molecular dynamics (MD) of the self-assembly of the conjugated polyelectrolyte poly[9,9-bis(4-sulfonylbutoxyphenylphenyl) fluorene-2,7-diyl-2,2’-bithiophene] (PBS-PF2T) with 680 mM pentaethylene glycol monododecyl ether (C12E5) in water. Simulations are used to examine the interaction between PBS-PF2T and C12E5 and suggest a break-up of PBS-PF2T aggregates in solution. These systems are dominated by the formation of cylindrical phases at temperatures between 0 °C and 20 °C and also between 45 °C and 90 °C. More diffuse phases are seen to occur between 20 °C and 45 °C and also above 90 °C. Simulations are related to previous computational and experimental studies on PBS-PF2T aggregation in the presence of tetraethylene glycol monododecyl ether (C12E4) in bulk and thin films.