Bevita K. Chandran

Mechanical Force-Driven Growth of Elongated Bending TiO2-based Nanotubular Materials for Ultrafast Rechargeable Lithium Ion Batteries

A stirring hydrothermal process that enables the formation of elongated bending TiO2 -based nanotubes is presented. By making use of its bending nature, the elongated TiO2 (B) nanotubular crosslinked-network anode electrode can cycle over 10 000 times in half cells while retaining a relatively high capacity (114 mA h g(-1)) at an ultra-high rate of 25 C (8.4 A g(-1)).

Flexible Transparent Films Based on Nanocomposite Networks of Polyaniline and Carbon Nanotubes for High‐Performance Gas Sensing

A flexible, transparent, chemical gas sensor is assembled from a transparent conducting film of carbon nanotube (CNT) networks that are coated with hierarchically nanostructured polyaniline (PANI) nanorods. The nanocomposite film is synthesized by in-situ, chemical oxidative polymerization of aniline in a functional multiwalled CNT (FMWCNT) suspension and is simultaneously deposited onto a flexible polyethylene terephthalate (PET) substrate. An as-prepared flexible transparent chemical gas sensor exhibits excellent transparency of 85.0% at 550 nm using the PANI/FMWCNT nanocomposite film prepared over a reaction time of 8 h. The sensor also shows good flexibility, without any obvious decrease in performance after 500 bending/extending cycles, demonstrating high-performance, portable gas sensing at room temperature. This superior performance could be attributed to the improved electron transport and collection due to the CNTs, resulting in reliable and efficient sensing, as well as the high surface-to-volume ratio of the hierarchically nanostructured composites. The excellent transparency, improved sensing performance, and superior flexibility of the device, may enable the integration of this simple, low-cost, gas sensor into handheld flexible transparent electronic circuitry and optoelectronic devices.

Stretchable Organic Semiconductor Devices.

Stretchable electronics are essential for the development of intensely packed collapsible and portable electronics, wearable electronics, epidermal and bioimplanted electronics, 3D surface compliable devices, bionics, prosthesis, and robotics. However, most stretchable devices are currently based on inorganic electronics, whose high cost of fabrication and limited processing area make it difficult to produce inexpensive, large-area devices. Therefore, organic stretchable electronics are highly attractive due to many advantages over their inorganic counterparts, such as their light weight, flexibility, low cost and large-area solution-processing, the reproducible semiconductor resources, and the easy tuning of their properties via molecular tailoring. Among them, stretchable organic semiconductor devices have become a hot and fast-growing research field, in which great advances have been made in recent years. These fantastic advances are summarized here, focusing on stretchable organic field-effect transistors, light-emitting devices, solar cells, and memory devices.

Soft Thermal Sensor with Mechanical Adaptability.

A soft thermal sensor with mechanical adaptability is fabricated by the combination of single-wall carbon nanotubes with carboxyl groups and self-healing polymers. This study demonstrates that this soft sensor has excellent thermal response and mechanical adaptability. It shows tremendous promise for improving the service life of soft artificial-intelligence robots and protecting thermally sensitive electronics from the risk of damage by high temperature.

Self‐Protection of Electrochemical Storage Devices via a Thermal Reversible Sol–Gel Transition

Thermal self-protected intelligent electrochemical storage devices are fabricated using a reversible sol-gel transition of the electrolyte, which can decrease the specific capacitance and increase and enable temperature-dependent charging and discharging rates in the device. This work represents proof of a simple and useful concept, which shows tremendous promise for the safe and controlled power delivery in electrochemical devices.

Bioinspired Nanosucker Array for Enhancing Bioelectricity Generation in Microbial Fuel Cells

A bioinspired active anode with a suction effect is demonstrated for microbial fuel cells by constructing polypyrrole (PPy) nanotubular arrays on carbon textiles. The oxygen in the inner space of the nanosucker can be depleted by micro-organisms with the capability of facul-tative respiration, forming a vacuum, which then activates the electrode to draw the microorganism by suction and thus improve the bioelectricity generation.

Rational Design of Materials Interface for Efficient Capture of Circulating Tumor Cells

Originating from primary tumors and penetrating into blood circulation, circulating tumor cells (CTCs) play a vital role in understanding the biology of metastasis and have great potential for early cancer diagnosis, prognosis and personalized therapy. By exploiting the specific biophysical and biochemical properties of CTCs, various material interfaces have been developed for the capture and detection of CTCs from blood. However, due to the extremely low number of CTCs in peripheral blood, there exists a need to improve the efficiency and specificity of the CTC capture and detection. In this regard, a critical review of the numerous reports of advanced platforms for highly efficient and selective capture of CTCs, which have been spurred by recent advances in nanotechnology and microfabrication, is essential. This review gives an overview of unique biophysical and biochemical properties of CTCs, followed by a summary of the key material interfaces recently developed for improved CTC capture and detection, with focus on the use of microfluidics, nanostructured substrates, and miniaturized nuclear magnetic resonance‐based systems. Challenges and future perspectives in the design of material interfaces for capture and detection of CTCs in clinical applications are also discussed.

Enhanced Photoresponse of Conductive Polymer Nanowires Embedded with Au Nanoparticles

A conductive polymer nanowire embedded with a 1D Au nanoparticle chain with defined size, shape, and interparticle distance is fabricated which demonstrates enhanced photoresponse behavior. The precise and controllable positioning of 1D Au nanoparticle chain in the conductive polymer nanowire plays a critical role in modulating the photoresponse behavior by excitation light wavelength or power due to the coupled-plasmon effect of 1D Au nanoparticle chain.

Alcohol-Mediated Resistance-Switching Behavior in Metal–Organic Framework-Based Electronic Devices

Metal-organic frameworks (MOFs) have drawn increasing attentions as promising candidates for functional devices. Herein, we present MOF films in constructing memory devices with alcohol mediated resistance switching property, where the resistance state is controlled by applying alcohol vapors to achieve multilevel information storage. The ordered packing mode and the hydrogen bonding system of the guest molecules adsorbed in MOF crystals are shown to be the reason for the alcohol mediated electrical switching. This chemically mediated memory device can be a candidate in achieving environment-responsive devices and exhibits potential applications in wearable information storage systems.

Stretchable Motion Memory Devices Based on Mechanical Hybrid Materials

Animals possess various functional systems such as sensory, nervous, and motor systems, which show effective cooperation in order to realize complicated and intelligent behaviors. This inspires rational designs for the integration of individual electronic devices to exhibit a series of functions, such as sensing, memory, and feedback. Inspired by the fact that humans can monitor and memorize various body motions, a motion memory device is developed to mimic this biological process. In this work, mechanical hybrid substrates are introduced, in which rigid memory devices and stretchable strain sensors are integrated into a single module, which enables them to work cooperatively in the wearable state. When attached to the joints of limbs, the motion memory device can detect the deformations caused by limb motions and simultaneously store the corresponding information in the memory device. This work would be valuable in materials design and electronics technology toward the realization of wearable and multifunctional electronic modules.