Bhanudas S. Kuchekar

Formulation and Evaluation of Gastroretentive Drug Delivery System of Propranolol Hydrochloride

The objective of present study was to develop a gastroretentive drug delivery system of propranolol hydrochloride. The biggest problem in oral drug delivery is low and erratic drug bioavailability. The ability of various polymers to retain the drug when used in different concentrations was investigated. Hydroxypropyl methylcellulose (HPMC) K4 M, HPMC E 15 LV, hydroxypropyl cellulose (HPC; Klucel HF), xanthan gum, and sodium alginate (Keltose) were evaluated for their gel-forming abilities. One of the disadvantages in using propranolol is extensive first pass metabolism of drug and only 25% reaches systemic circulation. The bioavailability of propranolol increases in presence of food. Also, the absorption of various drugs such as propranolol through P-glycoprotein (P-gp) efflux transporter is low and erratic. The density of P-gp increases toward the distal part of the gastrointestinal tract (GIT). Therefore, it was decided to formulate floating tablet of propranolol so that it remains in the upper part of GIT for longer time. They were evaluated for physical properties, in vitro release as well as in vivo behavior. In preliminary trials, tablets formulated with HPC, sodium alginate, and HPMC E 15 LV failed to produce matrix of required strength, whereas formulation containing xanthan gum showed good drug retaining abilities but floating abilities were found to be poor. Finally, floating tablets were formulated with HPMC K4 M and HPC.

Bioactive thermoresponsive polyblend nanofiber formulations for wound healing.

The rationale of this work is to develop new bioactive thermoresponsive polyblend nanofiber formulations for wound healing (topical). Various polymer compositions of thermoresponsive, poly(N-isopropylacrylamide), egg albumen and poly(ε-caprolactone) blend solutions with and without a drug [gatifloxacin hydrochloride, Gati] were prepared. Non-woven nanofibers of various compositions were fabricated using an electrospinning technique. The morphology of the nanofibers was analyzed by an environmental scanning electron microscope. The morphology was influenced by the concentration of polymer, drug, and polymer blend composition. Fourier transform infrared spectroscopy analysis showed the shift in bands due to hydrogen ion interactions between polymers and drug. Thermogram of PNIPAM/PCL/EA with Gati recorded a shift in lower critical solution temperature (LCST) and glass transition temperature (Tg) of PNIPAM. Similarly Tg and melting temperature (Tm) of PCL were shifted. X-ray diffraction patterns recorded a decrease in the crystalline state of PCL nanofibers and transformed crystalline drug to an amorphous state. In vitro release study of nanofibers with Gati showed initial rapid release up to 10h, followed by slow and controlled release for 696h (29days). Nanofiber mats with Gati exhibited antibacterial properties to Staphylococcus aureus, supported suitable controlled drug release with in vitro cell viability and in vivo wound healing.

SIMULTANEOUS DETERMINATION OF EMTRICITABINE AND TENOFOVIR BY AREA UNDER CURVE AND DUAL WAVELENGTH SPECTROPHOTOMETRIC METHOD

Two methods for the simultaneous determination of Emtricitabine and Tenofovir by spectroscopy have been developed. These two simple, accurate and precise methods include Area Under the Curve (AUC) method and Dual Wavelength Method. From a solvent effect studies and the spectral behaviours of Emtricitabine and Tenofovir, methanol was selected as solvent. Emtricitabine shows maximum absorbance at 281 nm and Tenofovir shows maximum absorbance at 259 nm. For the AUC method, the wavelength ranges between 242-248 nm and 269-275 nm were selected with reference to the absorbance curves plotted between the wavelengths of 200-400 nm. In the second method i.e. Dual method in which two wavelengths were selected for each drug in a way so that the difference in absorbance is zero for another drug. Emtricitabine shows equal absorbance at 230.696 nm and 250 nm, where the differences in absorbance were measured for the determination of Tenofovir. Similarly, differences in absorbances at 250 nm and 268.670 nm were measured for determination of Emtricitabine. These methods allows rapid analysis of two drug combination. The results of analysis were validated statistically and by recovery studies. This tablet containing both drugs was assayed using the methods developed, showing a good accuracy and precision.

Formulation and in vitro evaluation of taste-masked oro-dispersible dosage form of diltiazem hydrochloride

Diltiazem hydrochloride is a calcium channel blocker generally indicated for the treatment of angina and hypertension, and it is extensively metabolized due to the hepatic metabolism. Formulation of diltiazem hydrochloride into an oro-dispersible dosage form can provide fast relief with higher bioavailability. The bitter taste of the drug should be masked to formulate it in a palatable form. In the present work, an attempt was made to mask the taste by complexation technique, with a formulation into an oro-dispersible dosage form, using superdisintegrants Doshion P544, crospovidone (CP) and sodium starch glycolate (SSG). The complexes of diltiazem hydrochloride with β-CD (1:1 molar ratio) were prepared by kneading, co-evaporation, co-grounding, freeze-drying and melting methods. Phase solubility showed stability constant 819.13M-1. Prepared inclusion complexes were evaluated for taste masking and characterized by I.R, XRD, DSC. Using the drug β-CD complex, oro-dispersible tablets were prepared and evaluated for hardness, friability, weight variation, thickness, disintegrating time (DT), dissolution rate and taste. Formulations with 4 % Doshion, 8 % CP and 4 % SSG showed DT of 0.54, 0.35 and 1.23 minutes, respectively.

Preparation and Characterization of Metformin Hydrochloride - Compritol 888 ATO Solid Dispersion.

Metformin hydrochloride (MET) sustained-release solid dispersions (SD) were prepared by the solvent evaporation and closed melt method, using compritol 888 ATO as the polymer with five different drug-carrier ratios. Characterization of solid dispersion was carried out by Fourier Transform Infrared (FTIR) spectroscopy, ultraviolet (UV) spectroscopy, Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD). The FTIR and UV studies suggested that no bond formation had occurred between the polymer and the drug. DSC and XPRD results ruled out any interaction or complex formation between the drug and the polymer. The formulated SD had acceptable physicochemical characters and SD with a 1 : 4 drug : Polymer ratio, which released the drug over an extended period of eight-to-ten hours. The data obtained from the in vitro release studies were fitted with various kinetic models and were found to follow the Korsmeyer-Peppas equation. The prepared SD showed good stability over the studied time period. The solvent evaporation method was found to be more helpful than the closed melt method, giving the sustained release action. The SD with a 1 : 4 ratio of drug to polymer, by the solvent evaporation method, was selected as the most effective candidate for the subsequent development of a well-timed, sustained-release dosage form of the drug.

Formulation and Evaluation of Extended-Release Solid Dispersion of Metformin Hydrochloride

The purpose of this research was to formulate and characterize solid dispersion (SD) of metformin hydrochloride using methocel K100M as the carrier by the solvent evaporation and cogrinding method. The influence of drug polymer ratio on drug release was studied by dissolution tests. Characterization was performed by fourier transform spectroscopy (FTIR), ultraviolet, differential scanning calorimetry and X-ray powder diffractometry. The optimized formulation was subjected to accelerated stability testing as per ICH guidelines. Release data were examined kinetically. SD with 1:4 and 1:5 ratio of drug to polymer obtained by solvent evaporation and cogrinding were selected as the best candidates suitable for prolonged-release oral dosage form of metformin.

Solubility enhancement, physicochemical characterization and formulation of fast-dissolving tablet of nifedipine-betacyclodextrin complexes

Este estudo teve por objetivo principal incrementar a dissolucao do nifedipino, farmaco pouco soluvel em agua, por meio de sua complexacao com β-ciclodextrina e estudar o efeito do metodo de preparacao sobre o perfil de dissolucao in vitro. A razao estequiometrica, determinada por ensaio de solubilidade de fase, para a complexacao de nifedipino por inclusao em β-ciclodextrina foi 1:1. O complexo binario foi preparado por diferentes metodos, sendo caracterizado utilizando-se difratometria de raios X (XRD), calorimetria diferencial de varredura (DSC) e espectroscopia no infravermelho com transformada de Fourier (FT-IR). Realizou-se estudo de solubilidade de saturacao para avaliar o incremento da solubilidade do nifedipino. O complexo otimizado foi formulado em comprimidos de dissolucao rapida preparados por compressao direta, nos quais se utilizaram os superdesintegrantes Doshion P544, amido pre-gelatinizado, crospovidona, amidoglicolato de sodio e croscarmelose sodica. Os comprimidos, que foram avaliados quanto a friabilidade, dureza, variacao de peso, desintegracao e dissolucao in vitro, apresentaram taxa de dissolucao superior a do nifedipino pura.

Optimization Studies on Compression Coated Floating-Pulsatile Drug Delivery of Bisoprolol

The purpose of the present work was to design and optimize compression coated floating pulsatile drug delivery systems of bisoprolol. Floating pulsatile concept was applied to increase the gastric residence of the dosage form having lag phase followed by a burst release. The prepared system consisted of two parts: a core tablet containing the active ingredient and an erodible outer shell with gas generating agent. The rapid release core tablet (RRCT) was prepared by using superdisintegrants with active ingredient. Press coating of optimized RRCT was done by polymer. A 32 full factorial design was used for optimization. The amount of Polyox WSR205 and Polyox WSR N12K was selected as independent variables. Lag period, drug release, and swelling index were selected as dependent variables. Floating pulsatile release formulation (FPRT) F13 at level 0 (55 mg) for Polyox WSR205 and level +1 (65 mg) for Polyox WSR N12K showed lag time of 4 h with >90% drug release. The data were statistically analyzed using ANOVA, and P < 0.05 was statistically significant. Release kinetics of the optimized formulation best fitted the zero order model. In vivo study confirms burst effect at 4 h in indicating the optimization of the dosage form.

Application of Design of Experiment for Floating Drug Delivery of Tapentadol Hydrochloride

The aim of the present study was to apply design of experiment (DOE) to optimize floating drug delivery of tapentadol hydrochloride. Tapentadol hydrochloride is a synthetic opioid used as a centrally acting analgesic and effective in both experimental and clinical pain. The half-life of the drug is about 4 hours and oral dose is 50 to 250 mg twice a day. For optimization 32 full factorial design was employed for formulation of tapentadol hydrochloride tablets. Sodium bicarbonate was incorporated as a gas-generating agent. Combination of polymers Xanthan gum and Locust bean gum was used to achieve controlled release effect. The concentration of polymers was considered as the independent variables and dependent variables were floating lag time and swelling index of the tablets. From the factorial batches, it was observed that formulation containing combination of 20% sodium bicarbonate and 10% citric acid shows optimum floating ability whereas the formulation containing 20% Xanthan gum and 28% Locust bean gum shows optimum sustained drug release pattern with adequate floating.

Pulsatile multiparticulate drug delivery system for metoprolol succinate

Cardiovascular diseases and their treatment pose a great challenge. Many instances of cardiovascular disease occur in the early morning hours. Hence, the objective of this study was to develop a time-controlled release formulation of metoprolol succinate based on a pulsatile multiparticulate (pellets) drug delivery system. The formulation was intended to be administered in the evening at 22:00 hours to evaluate symptoms of cardiovascular disease that are experienced in the early morning hours (from 04:00 to 06:00). Drug layering followed by a swelling layer and finally by an insoluble coat application was done using a Sanmour fluid bed processor. Metoprolol succinate layered on sugar pellets (74% w/w) layered with 20% (w/w) ion doshion resin P-547 and coated with 15% (w/w) ethocel with the addition of 20% castor oil showed a lag time of 4 h and was then followed a sigmoidal release pattern with more than 95% drug having been released by the 10th h.