Biljana Pajin

Sour cherry pomace extract encapsulated in whey and soy proteins: Incorporation in cookies.

One of the potential sources of valuable bioactives is pomace, a by-product from fruit juice processing industry. In the presented study, bioactive compounds extracted from cherry pomace, encapsulated in whey and soy proteins, have been incorporated in cookies, replacing 10% (WE10 and SE10) and 15% (WE15 and SE15) of flour. Total polyphenols, anthocyanins, antioxidant activity and colour characteristics of enriched cookies were followed during 4 months of storage. Total polyphenols of WE10, SE10, WE15 and SE15 have shown a slight increase (23.47, 42.00, 4.12 and 1.16%, respectively), while total anthocyanins (67.92, 64.33, 58.75 and 35.91%, respectively) and antioxidant activity (9.31, 24.30, 11.41 and 12.98%, respectively) decreased. Colour parameters (L(∗), a(∗) and b(∗)) of cookies were influenced by the colour of encapsulates. Fortified cookies received satisfactory sensory acceptance as well. Encapsulated sour cherry pomace bioactives have positively influenced functional characteristics of fortified cookies and their preservation.

Functional, rheological and sensory properties of probiotic milk chocolate produced in a ball mill

The aim of this study was to investigate the survival of probiotics (Lactobacillus acidophilus NCFM, Lactobacillus rhamnosus HN001 and Bifidobacterium lactis HN019) in milk chocolate masses prepared at temperatures 35 °C and 40 °C. The influence of probiotics and preparation temperature on rheology, particle size distribution and sensory properties of the chocolates, was examined during 6 months of storage at 20 ± 2 °C. An inoculation temperature of 40 °C significantly improves the rheological and sensory properties of probiotic chocolate, as well as leading to the survival of L. acidophilus NCFM and L. rhamnosus HN001 strains. After 6 months of storage, the survival of these strains was above 90%, with a viable cell count of about 8.1 log(CFU g−1). An inoculation temperature of 40 °C provides higher scores of overall sensory quality (4.52–4.68), higher quality category (excellent), lower maximal viscosity (for 1.2 Pa s) of chocolates, than a temperature of 35 °C. Compared to the chocolate without probiotics, those inoculated at 40 °C achieved less increase in volume weighted mean diameter distribution (average 0.8%) than chocolates inoculated at 35 °C. Based on the results reported in this paper, seeding of the probiotics in industrial conditions can be done in the mixing tank (at 40 °C) before the phase of chocolate shaping. Addition of probiotics at this stage facilitates the manufacturing process, improves the overall quality of chocolate and preserves the probiotics as a key component of this type of product.

Sensory and instrumental evaluation of physical characteristics of laboratory-made chocolate

Sensory evaluation of chocolate, as a complex multicompound system, is one of the ways to define and control its physico-chemical characteristics, i.e. quality. Chocolate quality depends on structure and ingredients percentage that influence its appearance, taste and behaviour in the production processes and storage. The aim of this work was to compare certain quality factors of laboratory-made chocolate with added emulsifier-blooming inhibitor, determinated by sensory and instrumental analyses. Sensory evaluation of chocolate samples was made according to ISO 6685:1985 method (total score system). This ISO standard method was supplemented with QDA method for determination of mouth feel. The results of colour sensory evaluation showed good agreement with whiteness obtained on a MOM Colour 100 instrument by Hunter system evaluation. This showed that the sensory analysis, in comparison with instrumental determination of some quality factors, is an objective method.

Solid Fat Content, Pre-Crystallization Conditions, and Sensory Quality of Chocolate with Addition of Cocoa Butter Analogues

The objective of this study was to determine how the addition of two cocoa butter equivalents and cocoa butter improver affect the physical and sensory properties of chocolate. The laboratory-made chocolate samples were tempered at three different pre-crystallization temperatures (25, 27, and 29°C), using different concentrations (3, 5, and 7%) of two commercial cocoa butter equivalents as well as commercial cocoa butter improver of the chocolate. The nucleation time of the chocolate mass primarly depended on pre-crystallization temperature while the value of maximum torque of chocolate mass were influenced by both, pre-crystallization temperature and concentration of fats. Sensory evaluation revealed that cocoa butter equivalents were acceptable in chocolate formulation without producing a negative impact on the sensory quality, while usage of improver required adjustment of raw formulations or process parameters. The results of the instrumentally measured hardness revealed that addition of cocoa butter improver significantly (p > 0.05) increased hardness of chocolate samples.

Defatted wheat germ application: Influence on cookies’ properties with regard to its particle size and dough moisture content

The introduction of agro-food industry by-products rich in bioactive compounds represents major challenge in food industry sector. The influence of wheat germ particle size (<150 µm, 150–1000 µm, and 800–2000 µm), wheat germ content (5, 10, and 15%), and dough moisture content (20, 22, and 24%) on chemical, textural, and sensory characteristics of cookies was investigated using the Box–Behnken experimental design. The substitution of wheat flour with wheat germ increased the protein, fat, mineral, and fiber content of the cookies. The particle size of wheat germ affected the textural properties of cookies. As the particle size of wheat germ increased, the hardness of cookies decreased. The color of the cookie was most influenced by the interaction of dough moisture content and wheat germ particle size. Wheat germ level up to 15% had no significant effect on the sensory characteristics of cookies. A suitable combination of defatted wheat germ level, its particle size, and dough moisture content can improve the nutritional value of cookies, without causing a negative effect on the cookies’ sensory characteristics.

Influence of low‐melting milk fat fraction on crystallization and physical properties of chocolate

Purpose – Investigated milk fat fraction differs in physical attributes, first of all in melting point and solid fat content and its influence on crystallization process of cocoa butter i.e. chocolate mass. It means that this fraction slows down crystallization rate, decreases melting point of mixture with cocoa butter and causes chocolate softness. It is very important for quality of chocolate especially chocolate with nuts or sunflower kernel. The aim of this paper was to investigate the influence of low‐melting (26°C) milk fat fraction on crystallization processes in chocolate mass and define the optimal concentration of this fraction with suitable precrystallization temperature time regime. Solid fat content of chocolate which designates the influence of precrystallization changes in chocolate mass with addition of milk fat fractions was investigated.Design/methodology/approach – The precrystallization was performed in a laboratory crystallizer that is in a modified Brabender pharinograph, which measu...

Encapsulated sour cherry pomace extract: Effect on the colour and rheology of cookie dough

In this study, the effect of encapsulated sour cherry pomace extract on the physical characteristics of the cookie dough (colour, textural and rheological properties) was investigated. Sour cherry pomace extract encapsulated in whey (WE) and soy proteins (SE) was incorporated in cookie dough, replacing 10% (WE10 and SE10) and 15% (WE15 and SE15) of wheat flour. The dough samples containing encapsulates had the grey-blue colour (b* values significantly decreased compared to control sample). Due to the presence of anthocyanins, a* values of the dough colour increased significantly with the addition of encapsulates. The addition of soy protein encapsulate increased hardness, resistance to extension and viscosity of cookie dough and decreased deformation compliance (J), while the addition of whey encapsulate caused dough softness, higher deformation compliance and lower values of viscosity compared to control sample. Values of storage and loss modulus, G′ and G″, significantly decreased when wheat flour was replaced with WE and increased when the flour was replaced with soy protein encapsulate. The addition of soy protein encapsulate resulted in higher cookie hardness.

Application of supercritical carbon dioxide extrusion in food processing technology

Extrusion process is one of the most important innovations of the 20th century applied in many industries. Extrusion is a technology that is increasingly used for the production of various food products, especially snacks and breakfast cereals. Supercritical carbon dioxide (CO2) as a non-toxic, non-flammable and inexpensive, is applied in many processes, including the extrusion technology. Supercritical CO2 extrusion process (SCFX) found its application primarily in the processing and manufacturing plastic, but recently more and more begins to be applied in food production and processing. Scientific researches in this area are based in production of extrudates with improved properties compared to conventional extrusion process without the addition of CO2. A number of applications of SCFX in food processing technology will be reviewed and numerous advantages over the conventional process will be described in this paper.

Quality properties of cookies supplemented with fresh brewer's spent grain

Brewers spent grain (BSG) is a by-product generated during the brewing process. It is a rich source of dietary fibre and proteins, with great potential to increase nutritional value of food products. In this research different quantities of fresh (non-dried and non-milled) brewers spent grain (15, 25 and 50%) were added to wheat flour on a replacement basis in order to evaluate its effect on fibre and protein content, instrumental parameters of colour, microbial stability and sensory characteristics of cookies. Protein and fibre content of cookies increased following the addition of BSG from 7.55% to 9.69% and 6.8 to 15.55%, respectively. Considering the colour characteristics, addition of BSG decreased L* and b* values, while a* values increased. Enterobacteriaceae, Escherichia coli, Clostridium spp., yeasts and moulds were not detected in cookie samples, while the Enterobacteriaceae were detected (40 cfu/g) in fresh BSG. The addition of 25% of BSG resulted in best sensory characteristics of cookies in terms of surface appearance, hardness, grittiness and flavour. The results have shown that fresh BSG has a potential to increase nutritional value of the cookies without negative influence on cookie sensory characteristics and microbiological stability.

Influence of combined emulsifier on physical characteristics of fat filling

The influence of mixture of two separate emulsifiers and a new generation of emulsifier 2 in 1, which nowadays has a tendency to replace these two, on the rheological and textural properties and sensory quality of fat filling was investigated. Emulsifiers were added in concentrations of 0.3, 0.45 and 0.75%, and calculated on the total mass of raw materials. The addition of emulsifiers in concentrations of 0.3 and 0.45% had a significant influence on the textural and rheological parameters of fat filling. These results showed that is not necessary to add a maximum amount of an emulsifier in order to achieve optimal spreadibility and hardness, which is certainly justified from an economic point of view. The addition of emulsifier 2 in 1 caused starchy taste and migration of fat to the surface of fat filling. The sample with 0.45%, which was a combination of two emulsifiers, had the best sensory quality and spreadability characteristics.