Bing Yuan

A review of optical imaging and therapy using nanosized graphene and graphene oxide.

Nanosized graphene and graphene oxide (GO) are photoluminescent due to the presence of bandgaps and edges/defects. The excellent photostability of these nanomaterials makes them superior to molecular dyes for biological imaging. They can also produce intensive heat under laser irradiation, enabling them to serve as photothermal agents for cancer treatment. In this work, recent studies on the photoluminescence of these materials, their applications for biological imaging and photothermal cancer therapy are reviewed. Properties of laser, particularly the temporal property (continuous wave or pulsed), affect its interaction with materials. Therefore, the photoluminescence and photothermal effects, as well as their applications under both single (one)-photon (continuous wave laser) and two-photon (pulsed laser) excitation were summarized and analyzed. Synergistic therapy which combines chemotherapy and photothermal therapy using these materials is also reviewed. Finally, critical issues and challenges for further research and in medical applications of these materials are analyzed.

Magnetic and dielectric properties of Aurivillius phase Bi6Fe2Ti3−2xNbxCoxO18 (0 ≤ x ≤ 0.4)

We investigate the structural, magnetic, and dielectric properties of Bi6Fe2Ti3−2xNbxCoxO18 (0 ≤ x ≤ 0.4). The room-temperature ferromagnetism is observed in the Nb and Co co-doped samples compared with the paramagnetic behavior in Bi6Fe2Ti3O18. The ferromagnetism in Bi6Fe2Ti3−2xNbxCoxO18 can be understood in terms of spin canting of the antiferromagnetic coupling of the Fe-based and Co-based sublattices via Dzyaloshinsky-Moriya interaction. Moreover, doping Co at Ti sites can significantly enhance the ferromagnetic Curie temperature compared with the substitution of Co for Fe in the Aurivillius compounds. The dielectric loss of Bi6Fe2Ti3−2xNbxCoxO18 (0.1 ≤ x ≤ 0.4) exhibits a relaxation process. The rather large activation energy in the 0.1 ≤ x ≤ 0.3 samples implies that the relaxation process is not due to the thermal motion of oxygen vacancies inside ceramics.

Cooperative Transmembrane Penetration of Nanoparticles

Physical penetration of lipid bilayer membranes presents an alternative pathway for cellular delivery of nanoparticles (NPs) besides endocytosis. NPs delivered through this pathway could reach the cytoplasm, thereby opening the possibility of organelle-specific targeting. Herein we perform dissipative particle dynamics simulations to elucidate the transmembrane penetration mechanisms of multiple NPs. Our simulations demonstrate that NPs’ translocation proceeds in a cooperative manner, where the interplay of the quantity and surface chemistry of the NPs regulates the translocation efficiency. For NPs with hydrophilic surfaces, the increase of particle quantity facilitates penetration, while for NPs with partly or totally hydrophobic surfaces, the opposite highly possibly holds. Moreover, a set of interesting cooperative ways, such as aggregation, aggregation-dispersion, and aggregation-dispersion-reaggregation of the NPs, are observed during the penetration process. We find that the penetration behaviors of multiple NPs are mostly dominated by the changes of the NP-membrane force components in the membrane plane direction, in addition to that in the penetration direction, suggesting a different interaction mechanism between the multiple NPs and the membrane compared with the one-NP case. These results provide a fundamental understanding in the underlying mechanisms of cooperative penetration of NPs, and shed light on the NP-based drug and gene delivery.

Tunable dual-stimuli response of a microgel composite consisting of reduced graphene oxide nanoparticles and poly(N-isopropylacrylamide) hydrogel microspheres

A type of photo- and thermo-responsive composite microsphere composed of reduced graphene oxide nanoparticles and poly(N-isopropylacrylamide) (rGO@pNIPAM) is successfully fabricated by a facile solution mixing method. Due to the high optical absorbance and thermal conduction of rGO, the composite microspheres are endowed with the new property of photo-response, in addition to the intrinsic thermally sensitive property of pNIPAM. This new ability undoubtedly enlarges the scope of applications of the microgel spheres. Furthermore, through controlling the rGO content in the composite, the photo- and thermo-sensitivity of the composite can be effectively modulated. That is, with a lower rGO content (≤32% by weight), the composite microspheres perform only thermally induced changes, such as volume contraction (by ∼45% in diameter) and drug release, when crossing the lower critical solution temperature of pNIPAM. With a higher rGO content (∼47.5%), both temperature and light irradiation can trigger changes in the composite. However, when the rGO content is increased to around 64.5%, the thermo-responsivity of the composite disappears, and the spheres exhibit only photo-induced drug release. With a further increase in rGO content, the environmentally responsive ability of the microspheres vanishes.

Controlled Drug Loading and Release of a Stimuli-Responsive Lipogel Consisting of Poly(N-isopropylacrylamide) Particles and Lipids

Environmentally responsive materials are attractive for advance biomedicine applications such as controlled drug delivery and gene therapies. Recently, we have introduced the fabrication of a novel type of stimuli-sensitive lipogel composite consisting of poly(N-isopropylacrylamide) (pNIPAM) microgel particles and lipids. In this study, we demonstrated the temperature-triggered drug release behavior and the tunable drug loading and release capacities of the lipogel. At room temperature (22 °C), no calcein was released from the lipogel over time. At body temperature (37 °C), the release process was significantly promoted; lipids in the lipogel acted as drug holders on the pNIPAM scaffold carrier and prolonged the calcein release process from 10 min to 2 h. Furthermore, the loading and release of calcein could be effectively controlled by modulating the relative amount of lipids incorporated in the lipogel, which can be realized by the salt-induced lipid release of the lipogel.

Vesicle deposition and subsequent membrane–melittin interactions on different substrates: A QCM-D experiment

Quartz crystal microbalance with dissipation (QCM-D) technique is one of the most effective methods to monitor the dynamic behaviors of a layer on a solid surface. Moreover, it has been reported recently that it is able to provide a fingerprint for the peptide-membrane interactions. In this work, QCM-D technique combined with computer simulations was employed to investigate the deposition and transformation of vesicles, as well as the subsequent membrane-melittin interactions on different substrates. A range of substrate surfaces, i.e. naked SiO2 without or with Au/polyelectrolyte coating, were produced. The nature of the substrate determined whether the adsorbed vesicles were present as a high-quality supported bilayer or an assembled vesicle matrix, which consequently influenced the membrane-melittin interactions. It was indicated by the related computer simulations that the lipid packing state of the membrane was a key factor to determine the mechanism of membrane-peptide interactions. Furthermore, this work might be a good example of the application of QCM-D for the exploration of membrane-active peptides.

From kinetic–structure analysis to engineering crystalline fiber networks in soft materials

Understanding the role of kinetics in fiber network microstructure formation is of considerable importance in engineering gel materials to achieve their optimized performances/functionalities. In this work, we present a new approach for kinetic-structure analysis for fibrous gel materials. In this method, kinetic data is acquired using a rheology technique and is analyzed in terms of an extended Dickinson model in which the scaling behaviors of dynamic rheological properties in the gelation process are taken into account. It enables us to extract the structural parameter, i.e. the fractal dimension, of a fibrous gel from the dynamic rheological measurement of the gelation process, and to establish the kinetic-structure relationship suitable for both dilute and concentrated gelling systems. In comparison to the fractal analysis method reported in a previous study, our method is advantageous due to its general validity for a wide range of fractal structures of fibrous gels, from a highly compact network of the spherulitic domains to an open fibrous network structure. With such a kinetic-structure analysis, we can gain a quantitative understanding of the role of kinetic control in engineering the microstructure of the fiber network in gel materials.

Influence of surface chemistry on particle internalization into giant unilamellar vesicles

Cellular uptake of materials plays a key role in their biomedical applications. In this work, based on the cell-mimic giant unilamellar vesicles (GUVs) and a novel type of microscale materials consisting of stimuli-responsive poly(N-isopropylacrylamide) microgel particles and the incorporated lipids, the influence of particle surface chemistry, including hydrophobic/hydrophilic property and lipid decorations, on the adsorption and consequent internalization of particles into GUVs was investigated. It is found that the decoration of particle surface with lipids facilitates the adsorption of particles on GUV membrane. After that, the hydrophobic property of particle surface further triggers the internalization of particles into GUVs. These results demonstrate the importance of surface properties of particles on their interactions with lipid membranes and are helpful to the understanding of cellular uptake mechanism.

Volume confinement induced microstructural transitions and property enhancements of supramolecular soft materials

The rheological properties of supramolecular soft functional materials are determined by the networks within the materials. This research reveals for the first time that the volume confinement during the formation of supramolecular soft functional materials will exert a significant impact on the rheological properties of the materials. A class of small molecular organogels formed by the gelation of N-lauroyl-L-glutamic acid din-butylamide (GP-1) in ethylene glycol (EG) and propylene glycol (PG) solutions were adopted as model systems for this study. It follows that within a confined space, the elasticity of the gel can be enhanced more than 15 times compared with those under un-restricted conditions. According to our optical microscopy observations and rheological measurements, this drastic enhancement is caused by the structural transition from a multi-domain network system to a single network system once the average size of the fiber network of a given material reaches the lowest dimension of the system. The understanding acquired from this work will provide a novel strategy to manipulate the network structure of soft materials, and exert a direct impact on the micro-engineering of such supramolecular materials in micro and nano scales.

Critical behavior of confined supramolecular soft materials on a microscopic scale

The formation of fiber networks and the resulting rheological properties of supramolecular soft materials are dramatically influenced when the volume of the system is reduced to a threshold. Unlike un-confined systems, the formation of fiber networks under volume confinement is independent of temperature and solute concentration.