Bishnu Prasad Bastakoti

Polymeric Micelle Assembly for the Smart Synthesis of Mesoporous Platinum Nanospheres with Tunable Pore Sizes

A facile method for the fabrication of well-dispersed mesoporous Pt nanospheres involves the use of a polymeric micelle assembly. A core-shell-corona type triblock copolymer [poly(styrene-b-2-vinylpyridine-b-ethylene oxide), PS-b-P2VP-b-PEO] is employed as the pore-directing agent. Negatively charged PtCl4 (2-) ions preferably interact with the protonated P2VP(+) blocks while the free PEO chains prevent the aggregation of the Pt nanospheres. The size of the mesopores can be finely tuned by varying the length of the PS chain. Furthermore, it is demonstrated that the metallic mesoporous nanospheres thus obtained are promising candidates for applications in electrochemistry.

Tailored Design of Bicontinuous Gyroid Mesoporous Carbon and Nitrogen-Doped Carbon from Poly(ethylene oxide-b-caprolactone) Diblock Copolymers

Highly ordered mesoporous resol-type phenolic resin and the corresponding mesoporous carbon materials were synthesized by using poly(ethylene oxide-b-caprolactone) (PEO-b-PCL) diblock copolymer as a soft template. The self-assembled mesoporous phenolic resin was found to form only in a specific resol concentration range of 40-70 wt % due to an intriguing balance of hydrogen-bonding interactions in the resol/PEO-b-PCL mixtures. Furthermore, morphological transitions of the mesostructures from disordered to gyroid to cylindrical and finally to disordered micelle structure were observed with increasing resol concentration. By calcination under nitrogen atmosphere at 800 °C, the bicontinuous mesostructured gyroid phenolic resin could be converted to mesoporous carbon with large pore size without collapse of the original mesostructure. Furthermore, post-treatment of the mesoporous gyroid phenolic resin with melamine gave rise to N-doped mesoporous carbon with unique electronic properties for realizing high CO2 adsorption capacity (6.72 mmol g-1 at 0 °C).

Direct Growth of Cobalt Hydroxide Rods on Nickel Foam and Its Application for Energy Storage

The present work reports synthesis of cobalt hydroxide (Co(OH)2) rods on nickel foam and its supercapacitor application. Hierarchical Co(OH)2 rods with length of approximately 3.5 μm and diameter of approximately 400 nm were prepared by one-step, simple, and inexpensive chemical-bath-deposition method. The direct growth of Co(OH)2 rods on the Ni foam gave three dimensional (3D) structure for easy access of electrolyte throughout material surface. Also, well-adhered interface between Co(OH)2 rods and Ni-foam surface gave better conduction channels. Detailed electrochemical study was performed by using cyclic voltammetry and galvanostatic charge/discharge measurements. The results demonstrate that Co(OH)2 rods on Ni foam are efficient electrodes for supercapacitor application.

Synthesis of Mesoporous TiO2/SiO2 Hybrid Films as an Efficient Photocatalyst by Polymeric Micelle Assembly

Thermally stable mesoporous TiO2/SiO2 hybrid films with pore size of 50 nm have been synthesized by adopting the polymeric micelle-assembly method. A triblock copolymer, poly(styrene-b-2-vinyl pyridine-b-ethylene oxide), which serves as a template for the mesopores, was utilized to form polymeric micelles. The effective interaction of titanium tetraisopropoxide (TTIP) and tetraethyl orthosilicate (TEOS) with the polymeric micelles enabled us to fabricate stable mesoporous films. By changing the molar ratio of TEOS and TTIP, several mesoporous TiO2/SiO2 hybrid films with different compositions can be synthesized. The presence of amorphous SiO2 phase effectively retards the growth of anatase TiO2 crystal in the pore walls and retains the original mesoporous structure, even at higher temperature (650 °C). These TiO2/SiO2 hybrid films are of very high quality, without any cracks or voids. The addition of SiO2 phase to mesoporous TiO2 films not only adsorbs more organic dyes, but also significantly enhances the photocatalytic activity compared to mesoporous pure TiO2 film without SiO2 phase.

Polymeric Micelle Assembly for Preparation of Large-Sized Mesoporous Metal Oxides with Various Compositions

Here we report the synthesis of mesoporous metal oxide materials with various compositions by assembly of spherical polymeric micelles consisting of triblock copolymer poly(styrene-b-2-vinyl pyridine-b-ethylene oxide) (PS-b-PVP-b-PEO) with three chemically distinct units. The PVP block interacts strongly with the inorganic precursors for the target compositions. The hydrophobic PS block is kinetically frozen in the precursor solutions, enabling the spherical micelles to remain in a stable form. The frozen PS cores serve as templates for preparing robust mesoporous materials. The PEO corona helps the micelles to stay well dispersed in the precursor solutions, which plays a key role in the orderly arrangement of the micelles during solvent evaporation. This approach is based on assembly of the stable micelles using a simple, highly reproducible method and is widely applicable toward numerous compositions that are difficult for the formation of mesoporous structures.

Multi-Stimuli-Responsive Polymeric Materials.

Stimuli-responsive materials are of immense importance because of their ability to undergo alteration of their properties in response to their environment. The properties of such materials can be tuned by subtle adjustments in temperature, pH, light, and so forth. Among such smart materials, multi-stimuli-responsive polymeric materials are of pronounced significance as they offer a wide range of applications and their properties can be tuned through several mechanisms. Here, we aim to highlight some recent studies showcasing the multi-stimuli-responsive character of these polymers, which are still relatively little known compared to their single-stimuli-responsive counterpart.

Multifunctional Core‐Shell‐Corona‐Type Polymeric Micelles for Anticancer Drug‐Delivery and Imaging

We have developed core-shell-corona-type polymeric micelles that can integrate multiple functions in one system, including the capability of accommodating hydrophobic dyes into core and hydrophilic drug into the shell, as well as pH-triggered drug-release. The neutral and hydrophilic corona sterically stabilizes the multifunctional polymeric micelles in aqueous solution. The mineralization of calcium phosphate (CaP) on the PAA domain not only enhances the diagnostic efficacy of organic dyes, but also works as a diffusion barrier for the controlled release.

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions.

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.

Inorganic-organic hybrid nanoparticles with biocompatible calcium phosphate thin shells for fluorescence enhancement.

Polymeric micelles consisting of asymmetric triblock copolymers were successfully used for fabrication of robust hybrid nanoparticles with highly biocompatible calcium phosphate shells. The hydrophobic polystyrene core encapsulates hydrophobic fluorescent dyes such as Nile red. The anionic polyacrylic acid provides the site for the mineralization reaction of calcium phosphate. The polyethylene glycol corona stabilizes the hybrid nanoparticles. Fluorescent dyes can be used as imaging agents for determining the location of the nanoparticles and to give an observable indication of drug delivery, while the calcium phosphate shell can enhance the fluorescence of the encapsulated dye.

Functionalized magnetic iron oxide/alginate core-shell nanoparticles for targeting hyperthermia

Hyperthermia is one of the promising treatments for cancer therapy. However, the development of a magnetic fluid agent that can selectively target a tumor and efficiently elevate temperature while exhibiting excellent biocompatibility still remains challenging. Here a new core-shell nanostructure consisting of inorganic iron oxide (Fe3O4) nanoparticles as the core, organic alginate as the shell, and cell-targeting ligands (ie, D-galactosamine) decorated on the outer surface (denoted as Fe3O4@Alg-GA nanoparticles) was prepared using a combination of a pre-gel method and coprecipitation in aqueous solution. After treatment with an AC magnetic field, the results indicate that Fe3O4@Alg-GA nanoparticles had excellent hyperthermic efficacy in a human hepatocellular carcinoma cell line (HepG2) owing to enhanced cellular uptake, and show great potential as therapeutic agents for future in vivo drug delivery systems.