Bong-Hae Cho

Cone-beam computed tomography evaluation of short- and long-term airway change and stability after orthognathic surgery in patients with Class III skeletal deformities: bimaxillary surgery and mandibular setback surgery

The purpose of this study was to evaluate the volumetric change of the upper airway space in 36 Class III patients who had undergone bimaxillary surgery or isolated mandibular setback, and, further, to analyse the relation between post-surgical stability and airway change using cone-beam computed tomography (CBCT). A three-dimensional (3D) CBCT examination was performed at three stages: T0 (before surgery), T1 (an average of 4.6 months after surgery), and T2 (an average of 1.4 years after surgery). The results showed that the volumes of the oropharyngeal and hypopharyngeal airways decreased significantly 4.6 months post-surgery in the mandibular setback group (p<0.05), and these diminished airways had not recovered 1.4 years post-surgery. In the bimaxillary surgery group, the volume of the oropharyngeal airway also decreased. A Spearman correlation analysis showed that the anteroposterior length of the hypopharyngeal area had a correlation with post-surgical stability in the isolated mandibular surgery group, and that the cross-sectional area of the nasopharynx was correlated with maxillary relapse only in the bimaxillary surgery group (p<0.05).

Cone-beam computerized tomography evaluation of condylar changes and stability following two-jaw surgery: Le Fort I osteotomy and mandibular setback surgery with rigid fixation

OBJECTIVES The purpose of this study was to compare the changes of the condylar axis, the anteroposterior condylar position relative to the glenoid fossa, and post-2-jaw surgery stability. STUDY DESIGN All of the patients (12 male, 14 female) were assessed by cone-beam computerized tomography (CBCT) before surgery, after surgery, and at follow-up. CBCT images were referenced to assess skeletal stability, the condylar axis change, and the anteroposterior condylar position in the glenoid fossa. A repeated-measures analysis of variance (P = .05) also was performed. RESULTS The skeletal changes between postsurgery and follow-up (P < .05) were insignificant. Both the axial condylar angles and the anteroposterior condylar position significantly differed among the groups (P < .05). CONCLUSIONS After surgery, the coronal condylar axis was rotated inward. The anteroposterior condylar position in the glenoid fossa had moved from the anterior to the concentric position, tending to return slightly toward the original position. These changes did not negatively affect the stability.

Effect of Bimaxillary Surgery on Adaptive Condylar Head Remodeling: Metric Analysis and Image Interpretation Using Cone-Beam Computed Tomography Volume Superimposition

PURPOSE The aim of the present study was to use cone-beam computed tomography volume superimposition to investigate the effect of bimaxillary orthognathic surgery on condylar head remodeling. MATERIALS AND METHODS Using a retrospective study design, 2 investigators evaluated the cone-beam computed tomography data of subjects who had undergone Le Fort I osteotomy and mandibular setback surgery. The predictor variable was time, grouped as preoperative versus postoperative. The outcome variables were the measurement changes of the condylar heads and the distribution of the condylar head remodeling signs. Paired t and χ(2) tests were performed for the purposes of the 2-dimensional metric analysis and the condylar head remodeling distribution. P < .05 was considered significant. RESULTS The sample was composed of 22 adults (11 men and 11 women, age 20.3 ± 3.2 years) diagnosed with skeletal Class III malocclusion. The intra- and interoperator reliabilities of the image interpretation showed substantial agreement, according to Cohens kappa index. The condylar heights on the sagittal and coronal planes decreased after surgery. Bone resorption occurred predominantly in the anterior and superior areas on the sagittal plane, the superior and lateral areas on the coronal plane, and the anterolateral and posterolateral areas on the axial plane (P < .05). Bone formation was apparent only in the anteromedial area on the axial plane (P < .05). CONCLUSIONS Bimaxillary orthognathic surgery caused a decrease in the condylar heights and condylar head remodeling. The cone-beam computed tomography volume superimposition method showed that the condylar head had undergone remodeling after bimaxillary surgery.

Assessment of the relationship between the maxillary molars and adjacent structures using cone beam computed tomography

Purpose This study investigated the relationship between the roots of the maxillary molars and the maxillary sinus using cone beam computed tomography (CBCT), and measured the distances between the roots of the maxillary molars and the sinus floor as well as the thickness of the bone between the root and the alveolar cortical plate. Materials and Methods The study sample consisted of 83 patients with normally erupted bilateral maxillary first and second molars. A total of 332 maxillary molars were examined using CBCT images. The vertical relationship of each root with the maxillary sinus was classified into four types on CBCT cross-sectional images. The distance between the sinus floor and root and the bone thickness between the root and alveolar cortical plate were measured. Results In the buccal roots of the maxillary molars, a root protruding into the sinus occurred most frequently. A root projecting laterally along the sinus cavity was most common in the palatal roots of the maxillary first molars. The mesiobuccal roots of the maxillary second molar were closest to the sinus. The mesiobuccal roots of the first molars were closest to the cortical plate. Conclusion The relationship between the roots of the maxillary molars and the sinus differed between the buccal and palatal roots. A root protruding into the sinus occurred more frequent in the buccal roots of the maxillary molars. The mesiobuccal root of the maxillary second molar was closest to the maxillary sinus floor and farthest from the alveolar cortical plate.

External root resorption after orthodontic treatment: a study of contributing factors

Purpose The purpose of this study was to examine the patient- and treatment-related etiologic factors of external root resorption. Materials and Methods This study consisted of 163 patients who had completed orthodontic treatments and taken the pre- and post-treatment panoramic and lateral cephalometric radiographs. The length of tooth was measured from the tooth apex to the incisal edge or cusp tip on the panoramic radiograph. Overbite and overjet were measured from the pre- and post-treatment lateral cephalometric radiographs. The root resorption of each tooth and the factors of malocclusion were analyzed with an analysis of variance. A paired t test was performed to compare the mean amount of root resorption between male and female, between extraction and non-extraction cases, and between surgery and non-surgery groups. Correlation coefficients were measured to assess the relationship between the amount of root resorption and the age in which the orthodontic treatment started, the degree of changes in overbite and overjet, and the duration of treatment. Results Maxillary central incisor was the most resorbed tooth, followed by the maxillary lateral incisor, the mandibular central incisor, and the mandibular lateral incisor. The history of tooth extraction was significantly associated with the root resorption. The duration of orthodontic treatment was positively correlated with the amount of root resorption. Conclusion These findings show that orthodontic treatment should be carefully performed in patients who need the treatment for a long period and with a pre-treatment extraction of teeth.

Correlation of panoramic radiographs and cone beam computed tomography in the assessment of a superimposed relationship between the mandibular canal and impacted third molars

Purpose This study evaluated the association between cone beam computed tomography (CBCT) and panoramic radiographs in the assessment of a superimposed relationship between the mandibular canal and impacted third molars. Materials and Methods The study samples consisted of 175 impacted third molars from 131 patients who showed a superimposed relationship between the mandibular canal and third molars on panoramic radiographs and were referred for the examination of the mandibular canal with CBCT. Panoramic images were evaluated for the darkening of the root and the interruption of the mandibular canal wall. CBCT images were used to assess the buccolingual position of the mandibular canal relative to the third molar, the proximity of the roots to the canal, and lingual cortical bone loss. The association of the panoramic and CBCT findings was examined using a Chi-square test and Fishers exact test. Results Panoramic radiographic signs were statistically associated with CBCT findings (P<0.01). In cases of darkening roots, lingual cortical bone loss or buccally positioned canals were more frequent. In cases in which the mandibular canal wall was interrupted on panoramic radiographs, contact or lingually positioned canals were more frequent. Conclusion The results of this study suggest that contact between the mandibular third molar and canal and a lingually positioned canal could be more frequently observed in cases of the interruption of the white line of the mandibular canal and that there could be more lingual cortical loss in cases of darkening roots.

Radiographic evaluation of the course and visibility of the mandibular canal

Purpose This study was performed to investigate the course of the mandibular canal on panoramic radiography and the visibility of this canal on both panoramic radiography and cone-beam computed tomography (CBCT). Materials and Methods The study consisted of panoramic radiographs and CBCT images from 262 patients. The course of the mandibular canal, as seen in panoramic radiographs, was classified into four types: linear, elliptical, spoon-shaped, and turning curves. The visibility of this canal from the first to the third molar region was evaluated by visually determining whether the mandibular canal was clearly visible, probably visible, or invisible. The visibihlity of the canal on panoramic radiographs was compared with that on CBCT images. Results Elliptical curves were most frequently observed along the course of the mandibular canal. The percentage of clearly visible mandibular canals was the highest among the spoon-shaped curves and the lowest among the linear curves. On panoramic radiographs, invisible mandibular canals were found in 22.7% of the examined sites in the first molar region, 11.8% in the second molar region, and 1.3% in the third molar region. On CBCT cross-sectional images, the mandibular canal was invisible in 8.2% of the examined sites in the first molar region, 5.7% in the second molar region, and 0.2% in the third molar region. Conclusion The visibility of this canal was lower in the first molar region than in the third molar region. The mandibular canal presented better visibility on CBCT images than on panoramic radiographs.

The reliability of cone-beam computed tomography (CBCT) – Generated frontal cephalograms

BACKGROUND The purpose of this study was to evaluate the reliability of measurements from cone-beam computed tomography (CBCT)-generated frontal cephalogram. MATERIALS AND METHODS CBCT and conventional posteroanterior (PA) cephalograms were taken from 30 adult patients. CBCT image was set according to the Frankfurt-Horizontal (FH) plane as the horizontal plane and the midsagittal reference (MSR) plane. The CBCT frontal cephalograms were generated using the orthogonal Raycast method (group CT(raycast)), the orthogonal maximum intensity projection (MIP) method (group CT(MIP)) after the head reorientation according to the reference planes, and the generator tool provided by the employed 3-dimensional (3D) imaging software (group CT(generator)), respectively. The differences between the CBCT-generated frontal cephalograms and conventional PA cephalograms (group PA(ceph)) were compared by paired t-test (p<0.05). RESULTS The significant differences were shown in two measurements for group CT(raycast), in 12 measurements for group CT(MIP), and in eight measurements for group CT(generator). It was confirmed that the CBCT frontal cephalograms, generated by means of the Raycast method (Group CT(raycast)), were more comparable to the conventional PA cephalograms in their measurements than were the others (Groups CT(MIP), CT(generator)). CONCLUSION This study may well suggest that frontal cephalograms derived by 3D CBCT reorientation can be effectively employed in clinical applications.

Prevalence of missing and impacted third molars in adults aged 25 years and above

Purpose The purpose of this study was to determine the prevalence of missing and impacted third molars in people aged 25 years and above. Materials and Methods The study sample of 3,799 patients was chosen randomly from patients who visited Pusan National University Dental Hospital and had panoramic radiographs taken. The data collected included presence and impaction state, angulation, and depth of impaction of third molars, and radiographically detected lesions of third molars and adjacent second molars. Results A greater percentage of men than women retained at least one third molar. The incidence of third molars decreased with increasing age. The incidence of partially impacted third molars greatly declined after the age of 30. Vertically impacted maxillary third molars and horizontally impacted mandibular third molars were most frequent in all age groups. Among the maxillary third molars, those impacted below the cervical line of the second molar were most frequent in all age groups, and among the mandibular third molars, deeply impacted third molars were most frequent in those aged over 40. Dental caries was the most common radiographic lesion of the third molars. Mesioangularly impacted third molars showed radiographic lesions in 13 (9.5%) adjacent maxillary second molars and 117 (27.4%) mandibular second molars. Conclusion The number of remaining third molars decreased and the percentage of Class C depth increased with age. Caries was the most frequent lesion in third molars. Partially impacted mesioangular third molars showed a high incidence of caries or periodontal bone loss of the adjacent second molar. Regular oral examination will be essential to keep asymptomatic third molars in good health.

Radiographic evaluation of third molar development in 6- to 24-year-olds

Purpose This study investigated the developmental stages of third molars in relation to chronological age and compared third molar development according to location and gender. Materials and Methods A retrospective analysis of panoramic radiographs of 2490 patients aged between 6 and 24 years was conducted, and the developmental stages of the third molars were evaluated using the modified Demirjians classification. The mean age, standard deviation, minimal and maximal age, and percentile distributions were recorded for each stage of development. A Mann-Whitney U test was performed to test the developmental differences in the third molars between the maxillary and mandibular arches and between genders. A linear regression analysis was used for assessing the correlation between the third molar development and chronological age. Results The developmental stages of the third molars were more advanced in the maxillary arch than the mandibular arch. Males reached the developmental stages earlier than females. The average age of the initial mineralization of the third molars was 8.57 years, and the average age at apex closure was 21.96 years. The mean age of crown completion was 14.52 and 15.04 years for the maxillary and the mandibular third molars, respectively. Conclusion The developmental stages of the third molars clearly showed a strong correlation with age. The third molars developed earlier in the upper arch than the lower arch; further, they developed earlier in males than in females.